1. INSERT LAB TITLE HERE Experiment No.: X Experiment Date: XX/XX/XX Mechanical Measurements Laboratory Report MAE 333 Sec. 01 Insert student 1 name here Insert student 2 name here 1

2. Outline  Introduction  Method  Results  Discussion The Outline slide is typically expected but is not required. 2

3. Introduction  Purpose of experiment was to understand/determine/measure …  Experiment was performed by … procedure  Used … equipment 3

4. Introduction – Theory [1]Wikipedia, “Thermal Expansion,” Wikimedia Foundation, Inc., (http://en.wikipedia.org/wiki/Thermal_expansion accessed Sept. 16, 2013) References are provided right on same slide as where they are cited. 4

5. Method – Equipment  Thermometer Scale Mercury in tube  Something else… (image from Mission Restaurant Supply) Note that figure numbers are not required. 5

6. Method – Procedure 1. Do something 2. Do something else Note: write the procedure as a set of commands. 6

7. Results  Mean and standard deviation as function of number of readings 7

8. Discussion  It was observed that … Insert answers to questions in lab manual here.  It is concluded that … 8

9. Thank you! 9

10. Extra Slides Prepare some extra slides in case of questions. 10

11. Measurements  Raw recorded values for … TrialData X1 (mm)Data X2 (mm)Data X3 (mm)Comments Initial run… 11

12. Sample Calculations  Sample Calculations for xxx X = 5 mmX is the ____ Y is the ____ 12