Presentation is loading. Please wait.

Presentation is loading. Please wait.

Storm Water Pollution Prevention Plan Development Todd E. Hubmer PE WSB &

Similar presentations


Presentation on theme: "Storm Water Pollution Prevention Plan Development Todd E. Hubmer PE WSB &"— Presentation transcript:

1 Storm Water Pollution Prevention Plan Development Todd E. Hubmer PE WSB & Associates hubmer@wsbeng.com @wsbeng.com

2 How to develop a SWPPP   Description of the project   Description of how storm water and erosion will be manage on-site   Includes narrative, erosion control plan sheets, standard details   Drainage map, soils map, ponding calcs

3 SWPPP Components  Ponding must treat 0.5” of runoff from new impervious surface for entire subwatershed Wet basin, Wet basin, Regional pond, Regional pond, Combination, or Combination, or Alternative method (rain garden, etc.; requires 90 day review by MPCA) Alternative method (rain garden, etc.; requires 90 day review by MPCA)  Road projects: fit in ponding if you can. If cannot fit in, other options (grassy swales, rock checks grit chambers, etc.) should be used

4 Inspections and Maintenance   NPDES requires inspection Every 7 days Within 24 hours of a 0.5 inch-24 hour rainfall event Once a month for areas that have undergone final stabilization (but work is ongoing in other areas) See PCA calendar

5 Inspections and Maintenance   Inspection and maintenance must be recorded in writing and include: Date and time Name of inspector Findings and recommendations Corrective actions taken Date and amount of rainfall >0.5” in 24 hrs Documentation of changes in SWPPP

6 Penalties/Enforcement  PCA will be increasing enforcement SWCD’s, Watershed Districts can be authorized agents for PCA SWCD’s, Watershed Districts can be authorized agents for PCA  You will need to produce the SWPPP and inspection reports  Penalty for non-conformance is $10,000 per day per violation Erosion Control Jail

7 Erosion Control BMP’s Required by NPDES

8 INLET PROTECTION

9 GEOTEXTILE FABRIC MAINTENANCE OF SILT FENCE OR IF ADDITIONAL BMP’S MAY BE REQUIRED

10 ROCK CONSTRUCTION ENTRANCE TO REDUCE SEDIMENT TRACKED OFF SITE

11 FINAL STABILIZATION

12 DESIGNATED WASH-OUT SITE

13 CATEGORY 1 BLANKET, TEMPORARY SEED, AND SILT FENCE MAINTENANCE AFTER

14 Sediment tracked off site or on streets must be removed with 24 hours

15  Silt fence repaired, replaced when down or sediment reaches 1/3 height of fence w/i 24 hours

16 Other NPDES requirements  Silt fence repaired, replaced when down or sed reaches 1/3 height of fence w/i 24 hours  Temp and perm basins must be drained and cleaned out when ½ storage volume is gone w/i 72 hours  Sed deltas, filled CB’s, filled ditches must be cleaned/stabilized w/i 7 days  Sed tracked off site must be removed with 24 hours

17 Other NPDES requirements  If sed in lakes, wetlands, streams, stabilize area upstream and remove sed w/i 7 days  Hazardous materials stored appropriately  No dumping of oil, junk, etc  Garbage must be disposed of properly  Once site has undergone final stabilization, NOT submitted

18 Other inspection requirements  Seeding timeline w/i 200 feet of surface water Slope steeper than 3:1 – 7 days Slope steeper than 3:1 – 7 days Slope 10:1 to 3:1 – 14 days Slope 10:1 to 3:1 – 14 days Slope flatter than 10:1 – 21 days Slope flatter than 10:1 – 21 days  Surface water is stream, lake, wetland, ditches, ponds, whether natural or artificial.  Stockpiles need silt fence  Riprap at pipe ends w/i 24 hours of connecting  Dewatering – Water must be directed to storm water pond or treated before discharge

19 Questions?


Download ppt "Storm Water Pollution Prevention Plan Development Todd E. Hubmer PE WSB &"

Similar presentations


Ads by Google