Presentation is loading. Please wait.

Presentation is loading. Please wait.

11/3/2000cmd_soh1 SOH and CMD Current Status. 11/3/2000cmd_soh2 ISUAL Flight Software 0.0 SOH Telemetry CMD Input Debug I/O.

Similar presentations


Presentation on theme: "11/3/2000cmd_soh1 SOH and CMD Current Status. 11/3/2000cmd_soh2 ISUAL Flight Software 0.0 SOH Telemetry CMD Input Debug I/O."— Presentation transcript:

1 11/3/2000cmd_soh1 SOH and CMD Current Status

2 11/3/2000cmd_soh2 ISUAL Flight Software 0.0 SOH Telemetry CMD Input Debug I/O

3 11/3/2000cmd_soh3

4 11/3/2000cmd_soh4 GSE Support “SOH” Program (Geller wrote, C++) Reads CMD queue, sends command packets to DPU Reads SOH telemetry packets, writes SOH queue Writes Log file

5 11/3/2000cmd_soh5 ISUAL Debug PC (‘386) Flight Software Develop ment SOH/CMD debug GSE - “IZZY2” SOH Program o writes SOH queue o reads CMD queue Display programs which read SOH queue Command generators which write CMD queue

6 11/3/2000cmd_soh6 DPU Interface IMAGE-clone 8085 serial I/O ports –38.4K baud –Will be changed to 9600 baud IMAGE-clone DPU receiver software –interrupt-driven; byte queue IMAGE-clone transmitter software –programmed I/O (polled status)

7 11/3/2000cmd_soh7 GSE Interface National Instruments RS-422 card One port for both send and receive NI serial driver installed “SIO” C++ class developed for sending and receiving

8 11/3/2000cmd_soh8 SOH Telemetry Sends Monitor and SOH packets every 5 seconds –Some of the SOH data is valid –None of the Monitor data is valid yet Sends Echo packets –multiple commands echoed in one packet

9 11/3/2000cmd_soh9 CMD Input Processes commands: –Immediate exec –Command Echo –TPA recognized –(Time-tagged command handling is coded but not yet tested -- need 6-byte clock first)

10 11/3/2000cmd_soh10 SOH Queue readers “READER” - displays raw packet data “ECHO” - displays command echoes (SOH and Monitor display programs are being developed)

11 11/3/2000cmd_soh11 SOH Playback SOH_PB program Opens a selected Log file (written by SOH program) Reads Log file, writes SOH queue (Needs no connection to DPU)

12 11/3/2000cmd_soh12 Next Steps -- Hardware Another version of DPU –6-byte clock (seconds, 1/256, 1/256/256) –9600 baud CMD/SOH –TM transmitter –Pulse-per-Second interrupt

13 11/3/2000cmd_soh13 Next Steps - Flight SW Support 6-byte clock Translate between 10-byte (Astrium) and 6- byte (ISUAL clock) Time-set, using TPA and pulse-per-sec Rate limit the SOH to 50 bytes/sec Generate test-pattern science via TM Try out MBR protocol

14 11/3/2000cmd_soh14 Next Steps -- GSE Time-Set Pulse-per-second simulation (NI card) Synchronized TPA time-set messages Debug the TLMI card Simulate spacecraft TM data handling

15 11/3/2000cmd_soh15 The End


Download ppt "11/3/2000cmd_soh1 SOH and CMD Current Status. 11/3/2000cmd_soh2 ISUAL Flight Software 0.0 SOH Telemetry CMD Input Debug I/O."

Similar presentations


Ads by Google