1. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. An Overview of Mechanics Statics: The study of bodies in equilibrium. Dynamics: 1. Kinematics – concerned with the geometric aspects of motion 2. Kinetics – concerned with the forces causing the motion Mechanics: The study of how bodies react to forces acting on them.

2. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. RECTILINEAR KINEMATICS: CONTINIOUS MOTION (Section 12.2) A particle travels along a straight-line path defined by the coordinate axis s. The total distance traveled by the particle, s T, is a positive scalar that represents the total length of the path over which the particle travels. The position of the particle at any instant, relative to the origin, O, is defined by the position vector r, or the scalar s. Scalar s can be positive or negative. Typical units for r and s are meters (m) or feet (ft). The displacement of the particle is defined as its change in position. Vector form:  r = r’ - rScalar form:  s = s’ - s

3. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. VELOCITY Velocity is a measure of the rate of change in the position of a particle. It is a vector quantity (it has both magnitude and direction). The magnitude of the velocity is called speed, with units of m/s or ft/s. The average velocity of a particle during a time interval t is v avg = r / t The instantaneous velocity is the time-derivative of position. v = dr / dt Speed is the magnitude of velocity: v = ds / dt Average speed is the total distance traveled divided by elapsed time: (v sp ) avg = s T / t

4. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. ACCELERATION Acceleration is the rate of change in the velocity of a particle. It is a vector quantity. Typical units are m/s 2. As the text indicates, the derivative equations for velocity and acceleration can be manipulated to get a ds = v dv The instantaneous acceleration is the time derivative of velocity. Vector form: a = dv / dt Scalar form: a = dv / dt = d 2 s / dt 2 Acceleration can be positive (speed increasing) or negative (speed decreasing).

5. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. SUMMARY OF KINEMATIC RELATIONS: RECTILINEAR MOTION Differentiate position to get velocity and acceleration. v = ds/dt ; a = dv/dt or a = v dv/ds Integrate acceleration for velocity and position. Note that s o and v o represent the initial position and velocity of the particle at t = 0. Velocity:   t o v v o dt a dv   s s v v oo ds a dvvor   t o s s o dtvds Position:

6. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. CONSTANT ACCELERATION The three kinematic equations can be integrated for the special case when acceleration is constant (a = a c ) to obtain very useful equations. A common example of constant acceleration is gravity; i.e., a body freely falling toward earth. In this case, a c = g = 9.81 m/s 2 downward. These equations are: ta v v co  yields   t o c v v dtadv o 2 coo s t (1/2) a t v s s  yields   t os dtvds o )s - (s2a )(v v oc 2 o 2  yields   s s c v v oo ds a dvv

7. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. GENERAL CURVILINEAR MOTION (Section 12.4) A particle moving along a curved path undergoes curvilinear motion. Since the motion is often three-dimensional, vectors are used to describe the motion. The position of the particle at any instant is designated by the vector r = r(t). Both the magnitude and direction of r may vary with time. A particle moves along a curve defined by the path function, s. If the particle moves a distance  s along the curve during time interval  t, the displacement is determined by vector subtraction:  r = r’ - r

8. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. VELOCITY Velocity represents the rate of change in the position of a particle. The average velocity of the particle during the time increment t is v avg = r/t. The instantaneous velocity is the time-derivative of position v = dr/dt. The velocity vector, v, is always tangent to the path of motion. The magnitude of v is called the speed. Since the arc length s approaches the magnitude of r as t → 0, the speed can be obtained by differentiating the path function (v = ds/dt). Note that this is not a vector!

9. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. ACCELERATION Acceleration represents the rate of change in the velocity of a particle. If a particle’s velocity changes from v to v’ over a time increment t, the average acceleration during that increment is: a avg = v/t = (v - v’)/t The instantaneous acceleration is the time- derivative of velocity: a = dv/dt = d 2 r/dt 2 A plot of the locus of points defined by the arrowhead of the velocity vector is called a hodograph. The acceleration vector is tangent to the hodograph, but not, in general, tangent to the path function.

10. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. CURVILINEAR MOTION: RECTANGULAR COMPONENTS (Section 12.5) It is often convenient to describe the motion of a particle in terms of its x, y, z or rectangular components, relative to a fixed frame of reference. The magnitude of the position vector is: r = (x 2 + y 2 + z 2 ) 0.5 The direction of r is defined by the unit vector: u r = (1/r)r The position of the particle can be defined at any instant by the position vector r = x i + y j + z k. The x, y, z components may all be functions of time, i.e., x = x(t), y = y(t), and z = z(t).

11. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. RECTANGULAR COMPONENTS: VELOCITY The magnitude of the velocity vector is v = [(v x ) 2 + (v y ) 2 + (v z ) 2 ] 0.5 The direction of v is tangent to the path of motion. The velocity vector is the time derivative of the position vector: v = dr/dt = d(xi)/dt + d(yj)/dt + d(zk)/dt Since the unit vectors i, j, k are constant in magnitude and direction, this equation reduces to v = v x i + v y j + v z k where v x = = dx/dt, v y = = dy/dt, v z = = dz/dt x y z

12. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. RECTANGULAR COMPONENTS: ACCELERATION The direction of a is usually not tangent to the path of the particle. The acceleration vector is the time derivative of the velocity vector (second derivative of the position vector): a = dv/dt = d 2 r/dt 2 = a x i + a y j + a z k where a x = = = dv x /dt, a y = = = dv y /dt, a z = = = dv z /dt vxvx x vyvy y vzvz z The magnitude of the acceleration vector is a = [(a x ) 2 + (a y ) 2 + (a z ) 2 ] 0.5

13. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. NORMAL AND TANGENTIAL COMPONENTS (Section 12.7) When a particle moves along a curved path, it is sometimes convenient to describe its motion using coordinates other than Cartesian. When the path of motion is known, normal (n) and tangential (t) coordinates are often used. In the n-t coordinate system, the origin is located on the particle (the origin moves with the particle). The t-axis is tangent to the path (curve) at the instant considered, positive in the direction of the particle’s motion. The n-axis is perpendicular to the t-axis with the positive direction toward the center of curvature of the curve.

14. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. NORMAL AND TANGENTIAL COMPONENTS (continued) The position of the particle at any instant is defined by the distance, s, along the curve from a fixed reference point. The positive n and t directions are defined by the unit vectors u n and u t, respectively. The center of curvature, O’, always lies on the concave side of the curve. The radius of curvature, , is defined as the perpendicular distance from the curve to the center of curvature at that point.

15. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. VELOCITY IN THE n-t COORDINATE SYSTEM The velocity vector is always tangent to the path of motion (t-direction). The magnitude is determined by taking the time derivative of the path function, s(t). v = v u t where v = s = ds/dt. Here v defines the magnitude of the velocity (speed) and u t defines the direction of the velocity vector.

16. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. ACCELERATION IN THE n-t COORDINATE SYSTEM Acceleration is the time rate of change of velocity: a = dv/dt = d(vu t )/dt = vu t + vu t. Here v represents the change in the magnitude of velocity and u t represents the rate of change in the direction of u t.... a = v u t + (v 2 /) u n = a t u t + a n u n. After mathematical manipulation, the acceleration vector can be expressed as:.

17. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. ACCELERATION IN THE n-t COORDINATE SYSTEM (continued) So, there are two components to the acceleration vector: a = a t u t + a n u n The normal or centripetal component is always directed toward the center of curvature of the curve. a n = v 2 / The tangential component is tangent to the curve and in the direction of increasing or decreasing velocity. a t = v or a t ds = v dv. The magnitude of the acceleration vector is a = [(a t ) 2 + (a n ) 2 ] 0.5

18. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. SPECIAL CASES OF MOTION There are some special cases of motion to consider. 1)The particle moves along a straight line.   => a n = v 2 /= 0 => a = a t = v The tangential component represents the time rate of change in the magnitude of the velocity.. 2)The particle moves along a curve at constant speed. a t = v = 0 => a = a n = v 2 /. The normal component represents the time rate of change in the direction of the velocity.

19. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. SPECIAL CASES OF MOTION (continued) 3) The tangential component of acceleration is constant, a t = (a t ) c. In this case, s = s o + v o t + (1/2) (a t ) c t 2 v = v o + (a t ) c t v 2 = (v o ) 2 + 2 (a t ) c (s – s o ) As before, s o and v o are the initial position and velocity of the particle at t = 0. How are these equations related to projectile motion equations? Why? 4)The particle moves along a path expressed as y = f(x). The radius of curvature, , at any point on the path can be calculated from  = ________________ ] 3/2 (dy/dx) 2 1[  2 d 2 y/dx

20. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. CYLINDRICAL COMPONENTS (Section 12.8) We can express the location of P in polar coordinates as r = r u r. Note that the radial direction, r, extends outward from the fixed origin, O, and the transverse coordinate, , is measured counter-clockwise (CCW) from the horizontal.

21. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. VELOCITY in POLAR COORDINATES) The instantaneous velocity is defined as: v = dr/dt = d(ru r )/dt v = ru r + r durdur dt. Using the chain rule: du r /dt = (du r /d)(d/dt) We can prove that du r /d = u θ so du r /dt = u θ Therefore: v = ru r + ru θ        Thus, the velocity vector has two components: r, called the radial component, and r called the transverse component. The speed of the particle at any given instant is the sum of the squares of both components or v = ( r  2  r ) 2

22. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. ACCELERATION (POLAR COORDINATES) After manipulation, the acceleration can be expressed as a = (r – r 2 )u r + (r + 2r)u θ...... The magnitude of acceleration is a = (r – r 2 ) 2 + (r + 2r) 2 The term (r – r 2 ) is the radial acceleration or a r. The term (r + 2r) is the transverse acceleration or a ........ The instantaneous acceleration is defined as: a = dv/dt = (d/dt)(ru r + ru θ )..

23. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. CYLINDRICAL COORDINATES If the particle P moves along a space curve, its position can be written as r P = ru r + zu z Taking time derivatives and using the chain rule: Velocity:v P = ru r + r  u θ + zu z Acceleration:a P = (r – r  2 ) u r + (r  + 2r  ) u θ + zu z........

24. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. NEWTON’S LAWS OF MOTION (Section 13.1) The motion of a particle is governed by Newton’s three laws of motion. First Law: A particle originally at rest, or moving in a straight line at constant velocity, will remain in this state if the resultant force acting on the particle is zero. Second Law: If the resultant force on the particle is not zero, the particle experiences an acceleration in the same direction as the resultant force. This acceleration has a magnitude proportional to the resultant force. Third Law: Mutual forces of action and reaction between two particles are equal, opposite, and collinear.

25. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. NEWTON’S LAWS OF MOTION (continued) The first and third laws were used in developing the concepts of statics. Newton’s second law forms the basis of the study of dynamics. Mathematically, Newton’s second law of motion can be written F = ma where F is the resultant unbalanced force acting on the particle, and a is the acceleration of the particle. The positive scalar m is called the mass of the particle. Newton’s second law cannot be used when the particle’s speed approaches the speed of light, or if the size of the particle is extremely small (~ size of an atom).

26. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. NEWTON’S LAW OF GRAVITATIONAL ATTRACTION F = G(m 1 m 2 /r 2 ) where F = force of attraction between the two bodies, G = universal constant of gravitation, m 1, m 2 = mass of each body, and r = distance between centers of the two bodies. When near the surface of the earth, the only gravitational force having any sizable magnitude is that between the earth and the body. This force is called the weight of the body. Any two particles or bodies have a mutually attractive gravitational force acting between them. Newton postulated the law governing this gravitational force as

27. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. MASS AND WEIGHT It is important to understand the difference between the mass and weight of a body! Mass is an absolute property of a body. It is independent of the gravitational field in which it is measured. The mass provides a measure of the resistance of a body to a change in velocity, as defined by Newton’s second law of motion (m = F/a). The weight of a body is not absolute, since it depends on the gravitational field in which it is measured. Weight is defined as W = mg where g is the acceleration due to gravity.

28. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. UNITS: SI SYSTEM VS. FPS SYSTEM SI system: In the SI system of units, mass is a base unit and weight is a derived unit. Typically, mass is specified in kilograms (kg), and weight is calculated from W = mg. If the gravitational acceleration (g) is specified in units of m/s 2, then the weight is expressed in newtons (N). On the earth’s surface, g can be taken as g = 9.81 m/s 2. W (N) = m (kg) g (m/s 2 ) => N = kg·m/s 2

29. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. EQUATION OF MOTION (Section 13.2) The motion of a particle is governed by Newton’s second law, relating the unbalanced forces on a particle to its acceleration. If more than one force acts on the particle, the equation of motion can be written F = F R = ma where F R is the resultant force, which is a vector summation of all the forces. To illustrate the equation, consider a particle acted on by two forces. First, draw the particle’s free- body diagram, showing all forces acting on the particle. Next, draw the kinetic diagram, showing the inertial force ma acting in the same direction as the resultant force F R.

30. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. INERTIAL FRAME OF REFERENCE This equation of motion is only valid if the acceleration is measured in a Newtonian or inertial frame of reference. What does this mean? For problems concerned with motions at or near the earth’s surface, we typically assume our “inertial frame” to be fixed to the earth. We neglect any acceleration effects from the earth’s rotation. For problems involving satellites or rockets, the inertial frame of reference is often fixed to the stars.

31. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. EQUATION OF MOTION FOR A SYSTEM OF PARTICLES (Section 13.3) The equation of motion can be extended to include systems of particles. This includes the motion of solids, liquids, or gas systems. As in statics, there are internal forces and external forces acting on the system. What is the difference between them? Using the definitions of m = m i as the total mass of all particles and a G as the acceleration of the center of mass G of the particles, then m a G = m i a i. The text shows the details, but for a system of particles: F = m a G where F is the sum of the external forces acting on the entire system.

32. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. KEY POINTS 1)Newton’s second law is a “law of nature”-- experimentally proven, not the result of an analytical proof. 2)Mass (property of an object) is a measure of the resistance to a change in velocity of the object. 3)Weight (a force) depends on the local gravitational field. Calculating the weight of an object is an application of F = m a, i.e., W = m g. 4)Unbalanced forces cause the acceleration of objects. This condition is fundamental to all dynamics problems!

33. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. PROCEDURE FOR THE APPLICATION OF THE EQUATION OF MOTION 1)Select a convenient inertial coordinate system. Rectangular, normal/tangential, or cylindrical coordinates may be used. 2)Draw a free-body diagram showing all external forces applied to the particle. Resolve forces into their appropriate components. 3)Draw the kinetic diagram, showing the particle’s inertial force, ma. Resolve this vector into its appropriate components. 4)Apply the equations of motion in their scalar component form and solve these equations for the unknowns. 5)It may be necessary to apply the proper kinematic relations to generate additional equations.

34. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. RECTANGULAR COORDINATES (Section 13.4) The equation of motion, F = m a, is best used when the problem requires finding forces (especially forces perpendicular to the path), accelerations, velocities, or mass. Remember, unbalanced forces cause acceleration! Three scalar equations can be written from this vector equation. The equation of motion, being a vector equation, may be expressed in terms of its three components in the Cartesian (rectangular) coordinate system as F = ma orF x i + F y j + F z k = m(a x i + a y j + a z k) or, as scalar equations, F x = ma x, F y = ma y, and F z = ma z.

35. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. PROCEDURE FOR ANALYSIS Free-Body Diagram (always critical!!) Establish your coordinate system and draw the particle’s free-body diagram showing only external forces. These external forces usually include the weight, normal forces, friction forces, and applied forces. Show the ‘ma’ vector (sometimes called the inertial force) on a separate diagram. Make sure any friction forces act opposite to the direction of motion! If the particle is connected to an elastic linear spring, a spring force equal to ‘k s’ should be included on the FBD.

36. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. PROCEDURE FOR ANALYSIS (continued) Equations of Motion If the forces can be resolved directly from the free-body diagram (often the case in 2-D problems), use the scalar form of the equation of motion. In more complex cases (usually 3-D), a Cartesian vector is written for every force and a vector analysis is often best. A Cartesian vector formulation of the second law is F = ma or F x i + F y j + F z k = m(a x i + a y j + a z k) Three scalar equations can be written from this vector equation. You may only need two equations if the motion is in 2-D.

37. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. The second law only provides solutions for forces and accelerations. If velocity or position have to be found, kinematics equations are used once the acceleration is found from the equation of motion. Kinematics Any of the kinematics tools learned in Chapter 12 may be needed to solve a problem. Make sure you use consistent positive coordinate directions as used in the equation of motion part of the problem! PROCEDURE FOR ANALYSIS (continued)

38. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. NORMAL & TANGENTIAL COORDINATES (Section 13.5) When a particle moves along a curved path, it may be more convenient to write the equation of motion in terms of normal and tangential coordinates. The normal direction (n) always points toward the path’s center of curvature. In a circle, the center of curvature is the center of the circle. The tangential direction (t) is tangent to the path, usually set as positive in the direction of motion of the particle.

39. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. EQUATIONS OF MOTION This vector equation will be satisfied provided the individual components on each side of the equation are equal, resulting in the two scalar equations:  F t = ma t and  F n = ma n. Here  F t &  F n are the sums of the force components acting in the t & n directions, respectively. Since the equation of motion is a vector equation,  F = ma, it may be written in terms of the n & t coordinates as  F t u t +  F n u n +  F b u b = ma t +ma n Since there is no motion in the binormal (b) direction, we can also write  F b = 0.

40. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. NORMAL AND TANGENTIAL ACCERLERATIONS The tangential acceleration, a t = dv/dt, represents the time rate of change in the magnitude of the velocity. Depending on the direction of  F t, the particle’s speed will either be increasing or decreasing. The normal acceleration, a n = v 2 / , represents the time rate of change in the direction of the velocity vector. Remember, a n always acts toward the path’s center of curvature. Thus,  F n will always be directed toward the center of the path. Recall, if the path of motion is defined as y = f(x), the radius of curvature at any point can be obtained from

41. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. SOLVING PROBLEMS WITH n-t COORDINATES Use n-t coordinates when a particle is moving along a known, curved path. Establish the n-t coordinate system on the particle. Draw free-body and kinetic diagrams of the particle. The normal acceleration (a n ) always acts “inward” (the positive n-direction). The tangential acceleration (a t ) may act in either the positive or negative t direction. Apply the equations of motion in scalar form and solve. It may be necessary to employ the kinematic relations: a t = dv/dt = v dv/ds a n = v 2 / 

42. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. CYLINDRICAL COORDINATES (Section 13.6) This approach to solving problems has some external similarity to the normal & tangential method just studied. However, the path may be more complex or the problem may have other attributes that make it desirable to use cylindrical coordinates. Equilibrium equations or “Equations of Motion” in cylindrical coordinates (using r, q, and z coordinates) may be expressed in scalar form as:  F r = ma r = m (r – r q 2 )  F q = ma q = m (r q – 2 r q )  F z = ma z = m z.....

43. Mechanics for Engineers: Dynamics, 13th SI Edition R. C. Hibbeler and Kai Beng Yap © Pearson Education South Asia Pte Ltd 2013. All rights reserved. Note that a fixed coordinate system is used, not a “body-centered” system as used in the n – t approach. If the particle is constrained to move only in the r – q plane (i.e., the z coordinate is constant), then only the first two equations are used (as shown below). The coordinate system in such a case becomes a polar coordinate system. In this case, the path is only a function of q.  F r = ma r = m(r – r q 2 )  F q = ma q = m(r q – 2r q )..... CYLINDRICAL COORDINATES (continued)