1 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Slide 13 Chapter 12.5 Behavioral Modeling Start from section 12.5 SEPA

2 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Behavioral Modeling Outside world Application events behavior

3 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 The States of a System  state—a set of observable circum- stances that characterizes the behavior of a system at a given time  state transition—the movement from one state to another  event—an occurrence that causes the system to exhibit some predictable form of behavior  action—process that occurs as a consequence of making a transition

4 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Behavioral Modeling  make a list of the different states of a system (How does the system behave?)  indicate how the system makes a transition from one state to another (How does the system change state?)  indicate event  indicate action  draw a state transition diagram

5 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 State Transition Diagram Notation state new state event causing transition action that occurs

6 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 State Transition Diagram reading operator commands making copies reloading paper problem state full invoke read-op-input full and start invoke manage-copying copies done invoke read-op-input empty invoke reload paper jammed invoke problem-diagnosis not jammed invoke read-op-input

7 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Control Flow Diagram Reload Operator Input Manage Copying Produce user displays Perform Problem diagnosis Reload paper Paper feed status (jammed, empty) Start/stop Alarm Full Repro fault Level 1 CFD for photocopier software ++

8 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Notes on CFD…  In reality, the shaded data flow arrows are not shown as part of CFD  The vertical bar representing the CSPEC “window”  Implies that each of the events flowing into the bar will cause some process represented in the CFD to be activated  States do not necessarily correspond to process on a one-to-one basis  Eg. Making copies in STD encompass both manage copying and produce user displays process ++

9 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 The Control Model the control flow diagram is "superimposed" on the DFD and shows events that control the processes noted in the DFD control flows—events and control items—are noted by dashed arrows a vertical bar implies an input to or output from a control spec (CSPEC) — a separate specification that describes how control is handled a dashed arrow entering a vertical bar is an input to the CSPEC a dashed arrow leaving a process implies a data condition a dashed arrow entering a process implies a control input read directly by the process control flows do not physically activate/deactivate the processes—this is done via the CSPEC

10 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Control Specification (CSPEC) The CSPEC can be: state transition diagram (sequential spec) state transition table decision tables activation tables combinatorial spec

11 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Guidelines for Building a CSPEC list all sensors that are "read" by the software list all interrupt conditions list all "switches" that are actuated by the operator list all data conditions recalling the noun-verb parse that was applied to the software statement of scope, review all "control items" as possible CSPEC inputs/outputs describe the behavior of a system by identifying its states; identify how each state is reach and defines the transitions between states focus on possible omissions... a very common error in specifying control, e.g., ask: "Is there any other way I can get to this state or exit from it?"

12 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Process Specification (PSPEC) PSPEC narrative pseudocode (PDL) equations tables diagrams and/or charts bubble

13 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 A Design Note one or more ”components" in the software design PSPEC

14 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Creating Mini-Specs Software Specification

15 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Real-Time Analysis Methods  each introduces its own notation, but all  propose an approach for representing control and separating it from data  provide a mechanism for specifying events, states, and distributed processing  begin at the analysis level and work to derive processor assignments, tasks and program architectures

16 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Time continuous data flow Monitor And adjust Temperature level Monitored temperature Input “continuous” Output “continuous” Temperature Set point ++

17 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Real-Time Analysis & Design Methods  Gomaa, H., Software Design Methods for Concurrent and Real-Time Systems, Addison-Wesley,  Harel, D. et al, "STATEMATE: A Working Environment for the Development of Complex Reactive Systems, IEEE Trans. Software Engineering, vol. 16, no. 3, April, 1990, pp  Hatley, D.J. and I.A. Pirbhai, Strategies for Real-Time System Specification, Dorset House,  Selic, B., G. Gullekson, and P. Ward, Real-Time Object-Oriented Modeling, Wiley,  Shumate, K. and M. Keller,, Software Specification and Design—A Disciplined Approach For Real-Time Systems, Wiley  Ward, P.T. and S.J. Mellor, Structured Development for Real-Time Systems, 3 volumes, Yourdon Press, 1985, 1986.

18 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Data & control flows Monitor Fixture & Operator interface Bit string Parts status buffer Process Robot commands Process Robot commands Robot command file Operator commands Operator settings Start/stop flag Movement alarm Position commands Process activate Ward & Mellor Notation ++

19 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 DFD & CFD Monitor Fixture & Operator interface Max pressure Absolute tank pressure Converted pressure PSPEC If absolute tank pressure > max pressure Then Set above pressure to true Else Set above pressure to false Begin conversion algorithm x-ola Compute converted pressure Endendif Check & Convert pressure above pressure Hatley & Pirbhai Extension ++

20 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 The Data Dictionary

21 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Building a Data Dictionary

22 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Data Dictionary Notation

23 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Data Dictionary Example

24 These courseware materials are to be used in conjunction with Software Engineering: A Practitioner’s Approach, 5/e and are provided with permission by R.S. Pressman & Associates, Inc., copyright © 1996, 2001 Next…