Johnstone High School Graphic Communication Rectangular Pyramids

Slides:



Advertisements
Similar presentations
Graphic Communication
Advertisements

Graphic Communication
The Gordon Schools Graphic Communication Cut Hexagonal Prism
Graphic Communication
Solid Cylinder cut at an angle Drawing Abilities Teacher © J Lewis 2004.
Cylinders.  Cylinders are shapes that have a circular cross section and a depth.  They are used in shapes of bottles and their developments are used.
Greenfaulds High School
Graphic Communication.  The elevation and plan of an angled bearing block are shown.  Project an auxiliary elevation in the position indicated Auxiliary.
Development of Surfaces.
Packaging Project Net construction This is an example of constructing a net of a complex shape (Hexagonal based pyramid) using a compass drawing equipment.
Miscellaneous Name that shape Volume Surface Area Lateral Area
Aberdeen Grammar School
Hexagons & Hexagonal Prisms. Hexagons Hexagons are 6 sided shapes. Hexagons can be dimensioned in 2 different ways. 1. Across the faces. 2. Across the.
PLANOMETRIC VIEW OF A KITCHEN.
Hexagonal Pyramid cut at an angle #1
Pyramid Construction Pyramids Square Rectangle Hex Cone.
Graphic Communication
Aberdeen Grammar School True Shapes The Cylinder.
Square Pyramid (cut). Cut Square Pyramid - Problem The given views show the Front Elevation and unfinished Plan of a cut square pyramid. Draw the following.
Greenfaulds High School Orthographic Views. Orthographic Projection Orthographic projection is the name given to the type of drawing where a 3D object.
True Shapes The Rectangular Prism.
Graphic Communication
17/02/03Designed by Barry Forbes Graphic Communication Hexagons & Hexagonal Prisms.
The Cut Cone. The given views show the Front Elevation and part Plan of a cut cone. Draw the following views :- Complete Plan End Elevation Development.
What are these shapes? squarecircletrianglerectangle How many sides do each have? How many points do each have?
How to Draw 3D Figures Cube, Cylinder, Cone, Rectangular Pyramid.
Graphic Communication
Cut Cones. At the end of this unit you will be able to: Identify a Cone and draw orthographic views of Cones with cut surfaces. Project a cut surface.
17/02/03Designed by Barry Forbes Graphic Communication Rectangular Pyramids.
Hexagons & Hexagonal Prisms.
True Shapes The Cylinder.  This type of drawing is asked to be drawn as part of a cut, prism, pyramid, cylinder or cone.  It shows the actual shape.
Greenfaulds High School Cone Development. Development of surface (1) Mark the position where the apex of the Development will be placed
Design and technology st aidan’s high A pictorial sketch of a wall lamp is shown. The shade is in the form of a cut cone. Draw, from the given.
Menu Cones Cones – What Are They?. Menu Cones Drawing an Orthographic Cone You will be given sheets that will have the following views of a cone. These.
Sectional Elevations.  Used to show the insides of an object by drawing it as if it had been chopped.  Will appear in the General and Credit exams.
+ Pyramids and Prisms. + Solid An object with 3 Dimensions Height, Width, Length.
Menu Pyramids Cut Pyramids – What Are They?. Menu Pyramids This type of drawing is asked to be drawn as part of a cut, prism, pyramid, cylinder or cone.
A/F Hexagon Construction
Cones.  Cones are shapes that have a circular base and come to one point at the top.
Greenfaulds High School Oblique Views. Oblique views are a type of pictorial view. They show an object from the front with all depths at an angle of 45°.
Cones. Cones are shapes that have a circular base and come to one point at the top.
Pictorial Drawing Isometric.
True Shapes The Pyramid.  This type of drawing is asked to be drawn as part of a cut, prism, pyramid, cylinder or cone.  It shows the actual shape of.
Deans Community High School True Shapes The Pyramid.
Greenfaulds High School True Shapes The Rectangular Prism.
Hexagonal Prisms Developments.  A development is a flat template of a 3D shape that when folded up in the correct way makes the actual shape of the 3D.
Hexagonal Pyramid cut at an angle #1
Solid Cylinder cut at an angle
Deans Community High School
Deans Community High School
Auxiliary Views & Development
Deans Community High School
Hexagonal Pyramid cut at an angle #2
HEXAGONAL PRISM IN 60 UP 40 TOP BASE
10-2 & 10-3: Representations of 3-D Figures and Surface Area of Prisms
Graphic Communication
Cut Hexagonal Prism Cut Hexagonal Prism - Question
Graphic Communication
Graphic Communication
Cut Cones – What Are They?
ENGN103 Engineering Drawing orthographic projections
3-D Views of Solid Figures
ENGN103 Engineering Drawing orthographic projections
True Shape Questions.
ENGN103 Engineering Drawing orthographic projections
True Shapes.
The elevation and plan of an angled bearing block are shown.
Presentation transcript:

Johnstone High School Graphic Communication Rectangular Pyramids Technology Department

Rectangular Pyramids Square pyramids have a square base then sides that project upwards to one point.

Rectangular Pyramids The orthographic drawing of a square pyramid is shown on the next slide. You should notice that the Elevation and End Elevation are both triangular in shape. The plan has a square base with the 4 edges coming to one point in the centre.

Rectangular Pyramids Plan Elevation End Elevation

Rectangular Pyramids It as unlikely you will have to draw an uncut square pyramid in your exam. The next slides show you how to draw a square pyramid with its top chopped off.

Rectangular Pyramids You will be shown how to draw the Plan, End Elevation and the development of the pyramid shown over the next few slides.

Rectangular Pyramids 4 3 Next project the corners of the base up vertically. The Elevation is given, draw the Plan. To make this easier we number each of the corners of the pyramid. Complete the plan base. Complete the pyramid by connecting the corners 1 2 Number the corners of the Plan. The numbers on top are the corners at the front of the view. Project up the corners of the cut surface. 1 Connect the points of the cut surface on the Plan.. 2 Elevation 4 3

Rectangular Pyramids 4 3 The Plan should now be as shown if lines were firmed in. 1 2 1 2 Elevation 4 3

Rectangular Pyramids 4 3 Project the Heights from the Elevation and widths from the Plan to construct the End Elevation. Connect the points on the cut surface. 1 2 Firm in the Outline. Number the points on the base. Project the cut surface from the Elevation 1 Elevation 2 2 3 4 3 1 4

Rectangular Pyramids Now we will draw the development of the pyramid. In order to do this we need to find the “true length” of the edges of the pyramid. We don’t see the actual length of the edges because they slope away from us on both the Elevation and End Elevations.

Rectangular Pyramids 4 3 Rotate a corner about the apex on the plan to meet a horizontal line from the apex. Project down to the ground line of the Elevation 1 2 1 Elevation 2 2 3 4 3 1 4

Rectangular Pyramids 4 3 Connect the point to the apex. This is the True length of the sloping side. Indicate that it is the True Length Line. 1 2 T/L 1 Elevation 2 2 3 4 3 1 4

Rectangular Pyramids 4 3 Using a compass, rotate the length of the True Length line about a point. Connect the centre of the arc to an end of the arc. 1 2 1 2 2 3 Elevation 3 1 4 4

Rectangular Pyramids The Elevation is given for you. You have to draw the Plan view. Rectangular Pyramids 4 3 1 2 1 2 2 3 Elevation 3 1 4 4

Rectangular Pyramids 1 4 3 Using a compass, mark the length of the base along the arc 4 times. 4 Connect these points to the apex then each other in turn. 1 2 3 Number the points with a short edge on the outside. 2 1 2 2 3 Elevation 4 3 1 4 1

Rectangular Pyramids 1 4 3 On the Elevation, project the cut surface horizontally to the True Length Line. 4 Transfer the true lengths of the cut surface to the development. 1 2 3 2 1 2 3 Elevation 2 4 3 1 4 1

Rectangular Pyramids Connect the points. Then firm in. 1 3 4 4 1 2 3 2 Elevation 2 4 3 1 4 1

PowerPoint Presentation. 2003