Analysis in 9.0

What’s Next To be really accomplished in GIS (or GIT) you need the following … –Vector GIS (You got it) –Raster GIS (FOR556) –Expert in Vector GIS (FOR558) –GPS FEG XXX –Remote Sensing FEG XXXXXXX –Database management (FEG xxxx)

For Science & Engineering Biology – Raster and Vector …For556 and Myra Hall’s xxxx (final project can be same for both) Landscape Architecture – Vector GIS (FOR558) and AutoCad Forestry – Vector GIS (FOR558 & 556) Engineering (see previous slide)

For556, Spatial Modeling Use IDRISI to solve problems dependent on continuous surfaces ( elevation, water table, viewsheds, etc.) Emphasis is NOT on learning the software – that is easy Emphasis is on Creative Thinking through applying the technology to problem solving Like 557 has weekly exercises that provide less cookbook instructions as the semester progresses Quizzes but no exams; final problem

FOR558 Advanced Topics Next semester will be ArcGIS Emphasis on –Editing vector data – a tricky business in ArcGIS –Analysis –Using Data Models like ArcHydro for hydrologic modeling Forestry Data Model for forest management Planning Data Model –Grid processing and modeling The latest and greatest development in GIS

FOR558 Advanced Topics Next semester will be ArcGIS Emphasis on –Editing vector data – a tricky business in ArcGIS –Analysis –Using Data Models like ArcHydro for hydrologic modeling Forestry Data Model for forest management Planning Data Model –Grid processing and modeling Small class – exact topics covered depends of interests of enrollees

Sales Pitch Over On to Analysis In 9

Analysis Starts with selection… Why? Because –Many steps in analysis are simply selection by Attribute Location –Most of the OVERLAY functions’ operations depend on what features are selected

Here are some actions… Check that –Layer(s) are the ones you want –The selection options are what you want Check the bottom of the dialog and make sure it is doing what you want it to That sounds easy but quite often NOT easy Here are some of the options

Options:Intersect

Options:Touch Bndy of…

Options: Have their Center in…

Options: Are completely w/in…

Options: w/in a distance of…

Options: are contained by…

Selection Summary Allow the selection of features that certain criteria Is a pretty rich set of operations BUT –Some share name with the REAL overlay operations but don’t deliver the same result Intersect Within distance of Completely contain Completely within Have center in Share segment w/ Touch boundary of Are identical to Are crossed by outline Contain Are contained by

Overlay Operations Overlay operations are like the “select by location” functions but not exactly the the same. Both use two layers –Select by location just selects features –Overlay operations create new feature classes

Toolbox

Overlay: Erase From Help: Erase feature removes a chunk of the input feature It is important to keep Input and Erase feature correct or GIGO

Overlay: Union This computes a geometric intersection of the input and output feature classes. ALL features will be written to the output feature class with the attributes from both. Or: This tool builds a new feature class by combining the features and attributes of each feature class.

Overlay: Union The geometric Intersection of the input and output feature classes ALL features will be written to the output feature class with the attributes from both. Or: This tool builds a new feature class by combining the features and attributes of each feature class.

Overlay: Union

UNION: another view

Overlay: Identity Computes a geometric intersection (logic) of the input and identity features Input features (or portions thereof) that overlap the identity features will get their attribute features from the identity features To put it another way: combines the portions of features that overlap the identity features to create a new feature class.

Overlay: Identity Computes a geometric intersection (logic) of the input and identity features Input features (or portions thereof) that overlap the identity features will get attribute features from the identity features To put it another way: combines the portions of features that overlap the identity features to create a new feature class. Clips by the Input feature and then UNIONS what is left.

Overlay: Intersect Computes the geometric intersection of the input features or portions of features COMMON to all layers. This tool builds a new feature class from the intersecting features common in both feature classes. Available with any ArcGIS license.

Overlay: Intersect Computes the geometric intersection of the input features or portions of features COMMON to all layers. This tool builds a new feature class from the intersecting features common in both feature classes. Available with any ArcGIS license. Intersect is NOT the same as Identity

Overlay: Symmetric Diff Computes a geometric intersection of the input and update features. Any features COMMON to ONLY one of the inputs will be written to the output Or to put it another way: This tool creates a feature class from those features or portions of features that are not common to any of the other inputs.

Overlay: Symmetric Diff Computes a geometric intersection of the input and update features. Any features COMMON to ONLY one of the inputs will be written to the output Or to put it another way: This tool creates a feature class from those features or portions of features that are not common to any of the other inputs. This is the olive drab feature showing through a hole in the yellow feature !

Overlay: Update Computes the geometric intersection of the input and update features. The attributes and geometry of the input features are replaced by the update features. This tool updates the attributes and geometry of an input feature class or layer by the Update feature class or layer that they overlap

Overlay: Update Computes the geometric intersection of the input and update features. The attributes and geometry of the input features are replaced by the update features. This tool updates the attributes and geometry of an input feature class or layer by the Update feature class or layer that they overlap

Overlay: Summary IDENTITY INTERSECT SYM-DIF UNION UPDATE

Buffer Buffering is an additional tool used in Analysis.

Summary The analysis tool in ArcGIS are very powerful And fairly easy to understand … one at a time! It is use by combining the overlay and selection tools to solve a problem that is the problem!

Select by Location

A Problem Find location for a laboratory –Within 300 meters of a sewer line –NOT within 200 meters of a stream –Parcel in a specific landuse (900 is forest) –Not on steep slopes (<=20%) –>=100 acres but less than 200 acres THIS IS A CLASSIC LOCATION PROBLEMTHIS IS A CLASSIC LOCATION PROBLEM

Sewbuf 300 Buffer Sewers w/in 300m Streams not w/in 20m Sewer OK ERASE Landuse: Lucode =? Slope<=20% Strmbuf 20 Buffer OK sites IDENTITY Land OK IDENTITY Of selected polys Query

Booby Trap Select by location using Intersect does not give the same results as Overlay Intersect

Sel by Theme: Intersection Intersected Parcels w/ Cover with Ag Selected The red outlines are the selected parcels Lets Zoom In ----

Select by theme You can see that Entire Parcels were selected Parcels with only a little bit of Ag landuse were selected

Overlay Intersection BUT THE RESULT IS VERY DIFFERENT! Red outlines are the parcels selected by Select by theme Green are the result of the Overlay

So you have to be careful! Exercise 6 has you experiment with some simple layers And I will be throwing some relatively simple problems your way to provide more practice And I will be changing the schedule at bit too (what else is new?).