NextHome William Harmon

Part 4: Meet the Natives – Simple 2D Objects PrevNextHome 1. CAD drawing are not made up of which individual components ? A.Circles B.Squares C.Arc D.Lines Record your responses. See Answer Sheet at end.

Part 4: Meet the Natives – Simple 2D Objects PrevNextHome 2. Other drawing components could be ? A.Symbols B.Ellipses C.Text D.All of the above Record your responses. See Answer Sheet at end.

Part 4: Meet the Natives – Simple 2D Objects PrevNextHome 3. In drawing any component, you need to access a particular drawing command(s), this can be done by : A.Typing in a command B.Selecting it from the menu C.“A” only D.“A or B” only Record your responses. See Answer Sheet at end.

Part 4: Meet the Natives – Simple 2D Objects PrevNextHome 4. Which one is probably the most used geometric entity ? A.Polyline B.Rectangle C.Lines D.Arcs Record your responses. See Answer Sheet at end.

Part 4: Meet the Natives – Simple 2D Objects PrevNextHome A.Select the center then specify a radius. B.Select 3 points on the edge of the circle. C.Select the center then specify a diameter. D.Only “A and B”. 5. One way to construct a circle may be to : Record your responses. See Answer Sheet at end.

Part 4: Meet the Natives – Simple 2D Objects PrevNextHome * Answers to follow

Part 4: Meet the Natives – Simple 2D Objects PrevNextHome 1.B 2.D 3.D 4.C 5.A, B and C

Home Good Luck on the Next one Congratulations, Hope you scored well on the quiz !