doc.: IEEE Submission January 2016 Ed Callaway, ARM, Inc.Slide 1 Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [A Simple System Kept Simple] Date Submitted: [14 January 2016] Source: [Ed Callaway] Company [ARM, Inc.] Address [350 Fairway Drive, Suite 200, Deerfield Beach, Florida, USA ] Voice:[ ], Fax: [ ], Re: [ call for Intent and Participation, 18 December 2015] Abstract:[Announcement of an intent to propose, and identification of a simple standardization approach that meets the PAR requirements.] Purpose:[To initiate discussion of 15.4t technical features.] Notice:This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P t
doc.: IEEE Submission January 2016 Ed Callaway, ARM, Inc.Slide 2 A Simple System Kept Simple Ed Callaway ARM, Inc t
doc.: IEEE Submission January 2016 Ed Callaway, ARM, Inc.Slide 3 Typical Applications for IEEE t Provisioning (security key transport), firmware updates, and other large file transfers (Thread) While-you-wait audio file downloads at kiosks Improved battery life for high duty cycle activities, by reducing active time t
doc.: IEEE Submission January 2016 Ed Callaway, ARM, Inc.Slide 4 IEEE t PAR Scope “This amendment defines a physical layer for IEEE Std current revision, capable of supporting 2 Mb/s data rates, utilizing the MHz band, having backwards-compatibility to, and the same occupied bandwidth as, the present 2450 MHz O- QPSK physical layer, and capable of simple implementation. Target range should be at least 10 meters. This amendment defines modifications to the Medium Access Control (MAC) layer needed to support this new physical layer.” t
doc.: IEEE Submission January 2016 Ed Callaway, ARM, Inc.Slide 5 Key Requirements Capable of supporting 2 Mb/s data rates; Utilizing the MHz band; Having backwards-compatibility to, and the same occupied bandwidth as, the present 2450 MHz O-QPSK physical layer; and Capable of simple implementation t
doc.: IEEE Submission January 2016 Ed Callaway, ARM, Inc.Slide 6 Observations MSK and O-QPSK are very similar, have the same occupied bandwidth, and can be generated from the same circuits IEEE has an MSK PHY (§18) Since MSK bit rate == O-QPSK chip rate (2 Mb/s), no new frequency generation is needed All PAR requirements may be met by just three edits to the MSK PHY: –18.2 Data rate (text and Table ) – Transmit PSD mask (Table ) – Symbol rate (text) t