Vacuum Vessel lateral loading (Neutral beam port only) 5-12-05.

Slides:

Advertisements

Similar presentations

Design of Seismic-Resistant Steel Building Structures

Advertisements

INTRODUCTION TO PRESSURE VESSELS

A World of Solutions TM Falgout Canal Floodgate Structure Unbalanced Forces and Proposed Solutions October 2013.

Intake & Exhaust Team James Hogge Rebekah McNally Alisa Phillips Henos Woldegiorgis Upright Team Lloyd Outten Joseph Perry Josh Carroll Taylor Watkins.

Summary of Twisted Racetrack / Clamp Analysis K. D. Freudenberg.

FEA of Wind Turbine Tower Martin Knecht. The Problem FEA modeling of a wind turbine tower. Analysis: –Stress –Deflection Want to prevent –Yielding –Excessive.

API 20K Flange Design Task Group API SC6 Task Group

Vacuum Vessel Production Readiness Review

The Effect of T-Stiffener Web and Flange Tilt on Frame Stress Evaluated using Finite Element Analysis by Dean Pasquerella MASTER OF ENGINEERING Major Subject:

MAE 314 – Solid Mechanics Yun Jing

Overview of Design Methods Allowable Stress Design or Working Stress Method Factor of Safety= Allowable Stress Actual Stress.

Copyright 2001, J.E. Akin. All rights reserved. CAD and Finite Element Analysis Most ME CAD applications require a FEA in one or more areas: –Stress Analysis.

Tracker Solenoid Module Design Update Steve VirostekStephanie Yang Mike GreenWing Lau Lawrence Berkeley National LabOxford Physics MICE Collaboration Meeting.

Copyright © 2002J. E. Akin Rice University, MEMS Dept. CAD and Finite Element Analysis Most ME CAD applications require a FEA in one or more areas: –Stress.

CM 197 Mechanics of Materials Chap 14: Stresses in Beams

-1- ICST/HIT The 23 rd MICE Collaboration Meeting Jan.13 to 17, Harbin/China MICE/MuCool Coupling Magnets Vacuum Vessel Design Guo, Xinglong.

NSTX ARMOR PLATE 2/18/10 NEUTRAL BEAM ARMOR PRELIMINARY ANALYSIS.

Lecture Goals Doubly Reinforced beams T Beams and L Beams.

FEA of Moller Hybrid Vacuum Chamber J Kelsey Oct 2013.

Analyses of Bolted Joint for Shear Load with Stainless Steel Bushing and Frictionless Shim-Flange Interface Two cases of shim plates were investigated.

1 WBS 1 Design Analysis Status NCSX Analysis Meeting Dec 3, 2003.

1 LHC-DFBX Shipping Specification Steve Virostek LBNL Presented at the DFBX RFP Review October 2002, LBNL Brookhaven - Fermilab - Berkeley US LHC.

CHAPTER OBJECTIVES Analyze the stress developed in thin-walled pressure vessels Review the stress analysis developed in previous chapters regarding axial.

© 2011 Autodesk Freely licensed for use by educational institutions. Reuse and changes require a note indicating that content has been modified from the.

NCSX Vacuum Vessel Stress Analysis FDR Fred Dahlgren 17 May 2004.

ITER In-Vessel Coils (IVC) Interim Design Review Thermal Structural FEA of Feeders A Brooks July 27, 2010 July 26-28, 20101ITER_D_353BL2.

NSTX Supported by NSTX Centerstack Upgrade Project Meeting P. Titus January 27, 2010 Umbrella Leg Sliding Blocks TF OOP Support to the Vessel Seismic (Static.

SC Project Review of NCSX, April 8-10, 2008 Job 1260 Neutral Beam Transition Duct (NBTD) P. L. Goranson.

Nonlinear Analyses of Modular Coils and Shell structure for Cooldown and Modular Coil EM Loads Part 2 – Results of Clamp Assembly, Wing Bags, Poloidal.

An Analysis of Shell Structure for Dead Load H.M. Fan PPPL September 16, 2005.

Analyses of Bolted Joint for Bolt Preload and Shear Load

Finite Element Analysis of the18 Turn Beam H. F. Fan November 5, 2004.

56 MHz SRF Cavity Cryostat support system and Shielding C. Pai

ECAL End Cap Dee Assembly, Transport, InstallationCERN January 2006AR / RJSG – 1 Alexandre Riabov (IHEP, Protvino) Justin Greenhalgh (RAL) Finite Element.

Date 2007/Oct./23 FNAL-GDE-Meeting Global Design Effort 1 Cryomodule Interface Definition (FNAL-GDE-Meeting) N. Ohuchi.

The analysis runs in the following slides are based on a W8 x 58.0 wide beam with dimensions shown bellow.

COMBINED LOADING.  Analyze the stress developed in thin-walled pressure vessels  Review the stress analysis developed in previous chapters regarding.

56 MHz SRF Cavity and Helium vessel Design

1 MC Assembly over the VV FPA Station 3 FDR Review July 13, 2007 T. Brown.

1 HOW MANY ELEMENTS? How to choose element size? –Critically important in obtaining good results –Mesh refinement improves solution accuracy. –How small.

Two loading Conditions

Engineering Analysis October 23, 2006 Team Moondogs Chris Culver Rahul Kirtikar Elias Krauklis Christopher Sampson Michael Widerquist.

Reinforcement Information - Code

NCSX VACUUM VESSEL PL Goranson Final Design Review November 17, 2005 Man Access Port /Lateral Supports NCSX.

Nonlinear Analyses of Modular Coils and Shell structure for Coil Cool-down and EM Loads Part 1 – Results of Shell Structure and Modular Coils H.M. Fan.

Andrew Biehl.  The objective of this project is to develop a method for determining the nut factor of a bolted joint using the finite element method.

FEM Analysis of the Stage3 Support Frame H.M. Fan March 14, 2007.

Final_Bellows.ppt. The purpose for these analyses was to justify and select the appropriate NSTX Center Stack Update project VV Bellows. The bellows should.

Twisted Racetrack Revisited Model Changes: Side A has 10 turns Clamps have been modified to as built geometry. Property Changes (linear results.

CAD and Finite Element Analysis Most ME CAD applications require a FEA in one or more areas: –Stress Analysis –Thermal Analysis –Structural Dynamics –Computational.

Tate Bischoff & Joe Osborn.  Axial load of 500lbs  2in diameter shaft.

Chapter 1 Introduction Concept of Stress. Road Map: Statics  Mechanics of Materials  Elasticity  Plasticity Fracture Mechanics Fatigue Creep Mechanics.

Analysis of TF Load Paths and Vacuum Vessel Loading H. M. Fan Jan. 22, 2009.

NSTX Supported by NSTX Centerstack Upgrade Project Meeting P. Titus March F.

PCI 6 th Edition Lateral Component Design. Presentation Outline Architectural Components –Earthquake Loading Shear Wall Systems –Distribution of lateral.

1 VV Support Fixture FPA Stage 1 PDR Review August 10, 2005 T. Brown.

7/8/08 John Amann LC Mechanical Engineering LC 18M W Beam Dump Mechanical Engineering Design Updates.

Simulation: Importing Simulation setup from Inventor.

Pipe Integrity Check using Finite Element Analysis

2K Cold Box Structural Analysis

GOVERNMENT ENGINEERING COLLEGE, BHAVNAGAR TOPIC : INTRODUCTION TO PRESSURE VESSELS Prepared By :- 1.Aal Akash Ansari Aarif.

2K Cold Box Structure Analysis

RTML Vacuum System RDR Summary FermiLab October 24, 2007

FEA Analysis of an Assembly with Bolt Fasteners

Fredrik Fors Mechanical Engineering, JLab 09/29/2016

CAD and Finite Element Analysis

1.6 Allowable Stress Allowable Load < Failure Load

INTRODUCTION TO PRESSURE VESSELS

Stress Analysis of Universal Tilt Kit Attachment Points

Stress Analysis on SunSiphon Rack Design

Presentation transcript:

Vacuum Vessel lateral loading (Neutral beam port only)

Assumptions Vacuum pressure loading on neutral beam transition duct is omitted. Lateral support bracket is far from the neutral beam port flange. Thus, the port flange is fixed in this model and only local stress/deformation effects near the bracket are analyzed. Magnetic disruption loads assumed are 7000 lbs lateral distributed evenly between two neutral beam ports (3500 each). Vacuum loading due to unbalanced atmospheric load from two 12” diameter pumping ducts on one neutral beam port is considered. This results in a load (15 psi *π*12”^2/4 = 1696 lb) applied on the neutral beam port lateral support.

Model Refined mesh near lateral support bracket Only Neutral beam is modeled

Loading Fv = Vacuum Vessel unbalanced atmospheric load due to bellows on the neutral beam port. Fl = Vacuum vessel dynamic loading due to the magnetic disruption and/or seismic loading Fr = Resultant load on the NBTD lateral support bracket due to Fv and Fl.

Loading on FEA model The 6098 lb force applied to the lateral support bracket is a combination of the lateral magnetic (4140 lbs) loading and the vacuum loading (estimated at 1958 lbs) Model is fixed on the vacuum vessel flange support. Standard Earth Gravity is applied. All parts are constructed of Inconel 625. The bracket only supports loads that are normal to its flange surface. It slides when loading is applied in the x-direction.

Local Deflection Peak Deflection =.0189 in

Von Mises Stress Exterior view Interior view Peak Stress = 43 ksi (and is very localized)

Notes: A comprehensive analysis of the entire neutral beam port is outside the scope of the current WBS. With more effort, the deflections from the global model of the vacuum vessel can be mapped onto the connecting flange on the neutral beam port. However, it would be challenging to place an actual neutral beam on the global model as currently constructed since it is split down the middle of the neutral beam port and cyclic symmetry is used to form the 3 period model. Global model of vacuum vessel structure (all ports capped) Global model is split at the neutral beam port

Appendix: Very preliminary neutral beam port analysis with vacuum crush loading Peak Deflection = in Peak Stress = 44 ksi (essentially unchanged from the case without pressure loading)