Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory #002498 W2-1 BladeModeler 11.0 ANSYS, Inc. Proprietary ANSYS BladeModeler 11.0.

Slides:

Advertisements

Similar presentations

Creating posters and flyers Lesson -IV. Editing pictures inside Office Office 2007 has tools to edit photos and pictures in the document. Office 2007.

Advertisements

Working with Profiles in IX1D v 3 – A Tutorial © 2006 Interpex Limited All rights reserved Version 1.0.

Workshop 10 Turbo Pre and Post

Parametric Modeling Chapter 7. Training Manual December 17, 2004 Inventory # Parametric Modeling Contents Dimension References Promoting Parameters.

Select New Project from Project menu to create a new project File.

Workshop 15 Hybrid meshing of a simple HVAC assembly

XP New Perspectives on Microsoft Access 2002 Tutorial 61 Microsoft Access 2002 Tutorial 6 – Creating Custom Reports.

Advanced Microsoft Word Hosted by Jared Hoffman Topics Keyboard Shortcuts Customizing Toolbars and Menus Auto Format & Auto Correct Tabs Inserting Pictures.

BASIC TUTORIAL ON AUTODESK REVIT Created By MHS Architecture Portfolio.

DRAFTING and DIMENSIONING 98. A properly dimensioned drawing of a part is very important to the manufacturing outcome. With CATIA, it can be a very simple.

SolidWorks Teacher Guide Lesson8 School’s Name Teacher’s Name Date.

Civil 114 Civil Engineering Drawing AutoCAD

InDesign CS3 Lesson 3 Working with Frames. Using Frames Frames are containers in which you place graphics or text. Frames can also be used as graphic.

Concept Modeling Chapter 6. Training Manual December 17, 2004 Inventory # Concept Modeling Contents Concept Modeling Creating Line Bodies Modifying.

InDesign CS3 Lessons 1 and 2. Work Area When First Opened.

Learning. Microwave office Creators: Iman Radmanesh Amin Fehresti-sani.

Microsoft Visual Basic 2012 CHAPTER TWO Program and Graphical User Interface Design.

1 Database – Kits Kits… Opens the Machinings library management dialog box.

Workshop 14 Automatic Hex Meshing of a Bent Bar

ICEM CFD/AI*Environment 5.0 Hexa Workshop 2 3D Pipe Junction

ANSYS BladeModeler 11.0 Practical 1

University of Puerto Rico at Mayagüez Department of Mechanical Engineering Introduction to NX 6.0 Tutorial 3 Modified by (2011): Dr. Vijay K. Goyal and.

Ansys Workbench 1 Introduction

MICROSOFT WORD GETTING STARTED WITH WORD. CONTENTS 1.STARTING THE PROGRAMSTARTING THE PROGRAM 2.BASIC TEXT EDITINGBASIC TEXT EDITING 3.SAVING A DOCUMENTSAVING.

1 Ι © Dassault Systèmes Ι Confidential Information Ι Instructor’s Guide to Teaching SolidWorks Software Lesson 8 School’s Name Teacher’s Name Date.

Office 2003 Advanced Concepts and Techniques M i c r o s o f t Access Web Feature Data Access Pages.

Catalytic Converter Simulation

Office 2003 Advanced Concepts and Techniques M i c r o s o f t Access Project 5 Enhancing Forms with OLE Fields, Hyperlinks, and Subforms.

Getting Started With AutoCAD ENGR 2 Week #1 Laboratory.

XP New Perspectives on Microsoft Office Access 2003, Second Edition- Tutorial 2 1 Microsoft Office Access 2003 Tutorial 2 – Creating And Maintaining A.

1 Draw Mode. 2 Notable Points (RMB) End point: Snaps to the closest end point of the selected entity. Mid point: Snaps to the middle point of the selected.

T U T O R I A L  2009 Pearson Education, Inc. All rights reserved. 1 3 Welcome Application Introduction to Visual Programming.

Innovation Intelligence ® Section 6 Meshing in SimLab.

WS8.1-1 ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory # Workshop 8.1 Line and Surface Bodies DesignModeler.

ACTIVINSPIRE TRAINING Tips and tools for creating Flipcharts on ActivInspire.

Chapter 5 Quick Links Slide 2 Performance Objectives Understanding Framesets and Frames Creating Framesets and Frames Selecting Framesets and Frames Using.

Appendix B Turbo Pre and Post

Office 2003 Post-Advanced Concepts and Techniques M i c r o s o f t Access Project 7 Advanced Report and Form Techniques.

Introduction to Microsoft publisher

This is what we want to draw Extrude Mirror Round Edges.

WS13-1 VND101, Workshop 13 MSC.visualNastran 4D Exercise Workbook Pin and Bracket Assembly.

To begin click: File, New, then select Design Familiarize yourself with the controls on the page. Then use the maximise button the make the window fill.

Fall 2003Sylnovie Merchant, Ph.D. ACCESS Tutorial Note: The purpose of this tutorial is to provide an introduction to some of the functions of ACCESS in.

2006 International ANSYS Conference BladeModeler Demonstration Creating a Centrifugal Compressor Impeller Workshop 20 ANSYS CFX 11.0.

ADAMS Assignment 6 ME451:Kinematics and Dynamics of Machine Systems (Fall 2013) Assigned: November 13, 2013 Due: November 20, 2013.

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # BladeModeler 11.0 ANSYS, Inc. Proprietary BladeModeler 3.0 TurboSystem.

Introduction to Drafting and Design In order to begin our drawing we have to set the drawing limits or the paper size.

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W8-1 BladeModeler 11.0 ANSYS, Inc. Proprietary BladeModeler 11.0 Practical.

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W6-1 BladeModeler 11.0 ANSYS, Inc. Proprietary BladeModeler 11.0 Practical.

BladeModeler 4.0 BladeGen.

Train Body The next series of slides will guide you through the construction of the train body. Start a new drawing and save it as Train Body.

This is what we want to produce Import sketch dimensions Label angles Set the scale Add linear dimensions.

 2002 Prentice Hall. All rights reserved. 1 Introduction to the Visual Studio.NET IDE Outline Introduction Visual Studio.NET Integrated Development Environment.

You’ll Make a spreadsheet which will be like a Mad Libs Game. These Are The Directions.

Text Basics It's important to know how to perform basic tasks with text when working in a word processing application. In this lesson, you'll learn the.

Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner – Synergis Technologies © Tim Varner

1 Word Processing Intermediate Using Microsoft Office 2000.

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W3-1 BladeModeler 11.0 ANSYS, Inc. Proprietary ANSYS BladeModeler 11.0.

8-1 ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory # Chapter 8 Surface Meshing ANSYS Meshing Application.

WS4.3-1 ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved. July 2009 Inventory # Chapter 4 Volume Meshing – Workshop 3 Femur BF Cartesian.

1 Pertemuan 10 Using Type Matakuliah: U0344 / DESKTOP 1 Tahun: 2006.

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W0-1 BladeModeler 11.0 ANSYS, Inc. Proprietary ANSYS TurboSystem Practical.

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W4-1 BladeModeler 11.0 ANSYS, Inc. Proprietary ANSYS BladeModeler 11.0.

XP New Perspectives on Microsoft Office FrontPage 2003 Tutorial 5 1 Microsoft Office FrontPage 2003 Tutorial 5 – Creating Tables and Frames.

WS6.4-1 ANSYS, Inc. Proprietary © 2009 ANSYS, Inc. All rights reserved. July 2009 Inventory # Chapter 6 Introduction to Hexa – Workshop 4 Elbow Junction.

Static Mixer: Geometry and Mesh

WORKSHOP 1 introduction

VAB™ for INFINITY Tutorial

Workshop 3.1 Sketching DesignModeler.

Excel 2010 Screen Symbols.

Presentation transcript:

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-1 BladeModeler 11.0 ANSYS, Inc. Proprietary ANSYS BladeModeler 11.0 Practical 2 Low Pressure Ratio Compressor Impeller

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-2 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual Practical #2 In this tutorial we will: – Input initial design parameters – Input initial angle/thickness parameters – Optimize the meridional view – Adjust the blade angle – Define the leading edge shape

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-3 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Initial Design Parameters BladeGen allows the user to create a blade system from scratch, using one of six standard initial configuration types. For this example, a Radial Impeller is used. 1.Select the File | New | CFX-BladeGen Model menu command or toolbar button which will display the Initial Meridional Configuration Dialog 2.Select the Radial Impeller tab 3.Enter the parameters for the initial blade layout (shown on the following slide). 4.Be sure to select Ang/Thk mode in the bottom right corner

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-4 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller 5.Hit Enter or click Ok to continue

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-5 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Initial Angle/Thickness Parameters 1.Enter the nominal wrap angle of 45 degrees, thickness of 2.5 and 13 blades, as shown on the next slide Normally, BladeGen sets the leading edge theta to zero. If the Data Direction is set to TE to LE in the User Preferences Dialog (File > Preferences), then the trailing edge theta is set to zero 2.Press Enter or select the OK button to display the BladeGen Window

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-6 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Initial Angle/Thickness Dialog

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-7 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller BladeGen layout – Meridional and Auxialiary Views are shown TIP: Generally, it is best to define the meridional profile before defining the Ang/Thk or Prs/Sct views, since these views are dependent on the path length of the meridional profile

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-8 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Optimizing the Meridional View – The most critical operation in the meridional view is to define the shape of the hub and shroud curve – The endpoints for these curves were specified when Initial Design Parameters were entered – The location of a point can be easily visualized by utilizing the hover help The bubble is displayed when the user clicks and then holds the mouse cursor stationary (hovers) over a data point

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-9 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller When required, the location of a point can be changed in two ways: – Moving Points by Clicking and Dragging 1.Left click on the desired point and hold the mouse button 2.Move the mouse to the desired point position and release – Moving Points by Entering new Coordinate values 1.Double click the left mouse button on the desired point 2.In the location dialog box that opens, enter the desired coordinates and click OK. – Try moving the inlet points to horizontal = -100

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-10 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Annotated Meridional View Point Location Dialog Box

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-11 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Adjusting blade angles – The meridional profile is now defined and the Blade angles can be set. – In the Angle View, the active layer is indicated by a red dot in the layer column on the right-hand side. By default, the hub layer is active. – Once the Hub angles are set, the Shroud layer can be activated by left-clicking the black dot at the top of the layer column.

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-12 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Define the blade angle at the hub 1.Right-click in the Angle view and select Adjust Blade Angles 2.In the Leading Edge tab, enter 47º for the Tangential Beta value, the Beta value will automatically be updated as 90º minus Tang. Beta. Leave all the other values at zero. 3.In the Trailing edge tab, enter a Theta angle of 32.2º and enter 30º for the Beta value. The Tangential Beta value will be automatically updated as 60º. All other values can remain as zero. 4.Close the Blade Angle Dialog by selecting OK

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-13 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Adjust blade angles at the shroud – Make the shroud layer active by selecting the black dot at the top of the layer column

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-14 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller 1.Right click > Adjust Blade Angles, and click on the Trailing Edge tab 2.Tangential Beta LE = Theta TE = Tangential Beta TE = 60 5.Click OK

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-15 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Prescribing the Leading/Trailing Edge Shape 1.Select Blade | Properties menu commands or the toolbar button located on the left hand side of the CFX- BladeGen window to set the blade properties. 2.Set the values on Leading Edge/Trailing Edge Ellipse tab shown on the next slide 3.All other values can remain unchanged.

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-16 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Ensure to click the ellipse location as well

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-17 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Set the model properties: 1.Model > Properties Ensure Units are Set

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-18 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Save the file 1.File > Save As or the Save As icon 2.Filename: LPR_compressor.bgd Now go back to the Project page and open DesignModeler (click New geometry) – Use the same units that were defined in BladeGen (mm)

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-19 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller Click the BladeEditor icon 1.Accept the default file LCR_compressor.bgd We want the fluid domain for a CFD analysis 2.In the Details View (lower left corner) Change Hub Offset to 2 mm Set Create Blades to 1 Click Generate 3.Save the model LCR_compressor.agdb

Version 1.0 3/23/2007 © 2007 ANSYS, Inc. All rights reserved. Inventory # W2-20 BladeModeler 11.0 ANSYS, Inc. Proprietary Training Manual LPR Compressor Impeller This concludes the tutorial Extra things to try on your own: 1.Mesh the fluid volume in CFX-Mesh 2.Go back to BladeGen and modify the blade angles Save the new model with the same filename Re-Generate the new model in DesignModeler (just click the Generate icon!)