Lecture Objectives: Finish boilers and furnaces Start with thermal storage systems
Thermal storage for adjustment production to consumption We need a thermal storage somewhere in this system !
Thermal storage Store heat Many issues to consider (∆T, pressure, losses,…. ) Store cooling energy Chilled water For cooling condenser For use in AHU (cooling coils) Ice storage Compact but… Other materials (PCMs) that change phase the temperature we need in cooling coils Many advantages, but disadvantages too!
On-Peak and Off-Peak Periods This profile depends on the type of building(s) !
Chilled water tank Use of stored cooling energy StoreUse
Which one is better ? Depends on what you want to achieve: -Peak electric power reduction -Capacity reduction -…..
Downsizing the Chiller Lower utility costs Lower on-peak electrical consumption(kWh) Lower on-peak electrical demand (kW) Smaller equipment size Smaller chiller Smaller electrical service (A) Reduced installed cost May qualify for utility rebates or other incentives
Sizing storage system (use Annual Cooling-Load Profile) How often you need to use it? What are the cost-benefit curves ? What is the optimum size ?
Ice Storage Tank Many issues ! …. As freezing progresses progress the ice becomes thicker and significantly impedes heat transfer
Open Ice Storage Tank Also issues ! …..
Fluid Flow Rate and Freeze ΔT
Impact on Chiller Efficiency
PCMs A. Sharma et al. / Renewable and Sustainable Energy Reviews 13 (2009)
Other latent heat thermal storage systems (research is ongoing)
Construction and benefits Active Passive (wall)
Stratified chilled water tanks
Temperature and dynamics Temperature at outlet during the changing cycle of the tanks
Stratified chilled water tanks diffuser geometry Challenge: “Pull” large amount of energy without disturbing stratification
Modeling Write energy and mass balancer equation for each section
Installation of thermal storage system DownstreamUpstream Increases chiller efficiency Increases chiller capacity Overall system efficiency ??? Decreases storage capacity Simplifies system layout ….. Decreases chiller efficiency Decreases chiller capacity Overall system efficiency ??? Increases storage capacity …… Does not allow chiller shut down!
Mixing vs Diverting Valves
Plumbing arrangement in primary system Primarily-OnlyPrimarily & Secondary
Plumbing arrangement in buildings (secondary systems)