Fun With Physics Intersession By Joey Roeckner. Fun Projects I though that there were many fun projects during the time in this Intersession I though.

Slides:



Advertisements
Similar presentations
Soda Bottle Rocket Launcher
Advertisements

My pictures By : Quintin Bishop. This is my first drawing my favorite part is the moon. This is my first drawing my favorite part is the moon.
HOW TO MAKE A ROCKET BY SAM CANNINGTON. THE FUSELAGE 1.Cut out a thin peace of cardboard.
© Good Hifi 2007 Glue rings to the back A manual.
Copyright © 2011 InteractiveScienceLessons.com Diaphragm (dī-uh-fram) -the muscle across the bottom of the rib cage that causes the lungs to fill with.
An Introduction to Water Rockets. At first, I just built rockets that had no recovery system at all, this makes things simple if the rocket survives the.
How to Make a PAPER TIGER. STEP 1: MAKE BODY TUBE 1. Use a spent engine to roll your body tube out of copier paper the short way 2. Test the size by sticking.
FLYP Workshop: Early Literature Activities!. Touch and Guess: How does #3 feel? Which one feels soft? Which one feels cold? What about squishy?
Catapults SCIENCE FAIR Purpose The reason we did this project would be: to see, out of the 6 th grade class, what group can build a catapult to.
Scratch Robots Catapult. Premium Quality Junk Modules Catapult – Step 1 Parts: - 8.5” x 11” cardboard - 4”x6” Foamie - 1 Starbucks.
WELCOME TO WAYNE’S WORLD! JULY 16, 2007 WAYNE DOE 1.
The Estes Viking Rocket
An Introduction to Water Rocketry
African Masks.
By: Jake Lowry Per. 5 1/09/10. Problem: How will the amount of metal balls per magnet, in a gauss gun, affect the speed of the last ball? I would like.
By Anthony Lewis BAKING IN THE SUN. Solar Power Project I Anthony Lewis, have signed up for the STEM program. I have been assigned a project that involves.
Tetrahedron Kite Created by: Atiah Husamudeen Date : July, 19,2012.
On this project of STEM, we are doing a tetrahedron kite, building it with: Tissue Paper String Tape Straws When we’re done building it, we will be able.
Recycling Things By Isabelle. Recycling paper You should recycle paper because you can use it over again.
CO2 Cars Project #2 Land Transportation.
The Art of Napping Emily Kooistra, Resident Assistant Penn State- Berks.
Stained Glass Windows. In medieval times, religion controlled daily life. Cathedrals were fancy churches. They were built to honor God. Each town wanted.
1. b. Rip Saw 2. d. Used for cutting with the grain.
Fun With Physics Intersession By: Richie Durbin. Catapult  The catapult was the first project. This project had some success, but the catapult did not.
1 TREBUCHETTREBUCHET A trebuchet owner’s manual by Jennifer & Andrea.
My Life ::By Joey Counts.. North Carolina North Carolina is were I first lived when I was young. Even though I was born in Norfolk, VA.
The Physics of Waves Activity: Moving Sounds 9-12 Science Std: Phys 4a.
Catapult sales poster for free style by Cindy Pierre.
Intersession Final Project By: John Fay. What I Learned in Intersession In my intersession, we built catapults, trebuchets, rockets, slingshots, and bridges.
My science fair project By matt Thompson Biology per.3 12/14/09 By matt Thompson Biology per.3 12/14/09.
Fun with Physics T.J. Honnert. The most boring intersession in Glen Este.
The Mystery Machine Created by Kyle Rockwell, Ronan Shaffer, Dalton Scheiner, Emmy Nam.
Fun with Physics Intersession By Josh Walters. In this intersession (fun with physics) we did a lot of hands on projects to help us learn more about physics.
Tool kit for making Carnival Masks. First, talk about Carnivals then choose a theme.
By Anthony Lewis BAKING IN THE SUN. Solar Power Project I Anthony Lewis, have sign up for the STEM program. I have been assign with a project that involves.
Wenitem Ndigwe. Table of Contents 1. Title 2. Table of Contents 3. Question 4. Hypothesis 5. Material 6. Procedures 7. Conclusion 8. Question 9. Bibliography.
Intersession Fun with Physics By David Pilcher. Rockets I Learn how to make Rockets The Rockets flew high We had to go and get them In the middle of flying.
Encounters Olivia Riojas Sam Houston Elementary April
About Me Chris Charido. Me Hobbies Playing baseball Playing video games Watching TV Playing basketball Listening to music Riding bikes.
Chapter 1 Making Healthy Decisions Practicing Healthful Behaviors Slide 1 of 3 Health in the Balance Materials Cut out a cardboard triangle that is 8 inches.
Gift bag decorated with decoupage. 1. Draw the shape of the bag on a sheet of brown paper (or any other solid one)
The American pioneers. At the end of the lesson answer the questions: Was the life of American pioneers difficult? Was their life interesting?
The Fun of Physics Ryan Sheldon. The first part of our journey into the world of physics began with the construction of our own miniature catapults using.
Science Olympiad 2011 Coaches Clinic Division B Justine Cromer, Instructor.
WELCOME! Don’t forget to enjoy the music!. MAP Balloon building done right Members: Matt Roland Aaron Cooper Evan Penrod.
INTERSESSION Fun with Physics. Catapults We made catapults We made catapults The catapults were made of wood and a rat trap The catapults were made of.
Tetrahedron Kites By Aaliyah O’Garra.
Fun With Physics Trevor Meranda. Physics The science of matter, energy, motion, and force.
INTERSESSION Fun with physics. Catapults This was the first project that we worked on during intersession. We had a war with the catapults. We threw paper.
{ Catapult Project. We started with just a ¾ inch piece of pvc pipe and decided we needed it more rigid.
In the colonies days Toys and games. In colonies days they didn’t have computers or Nintendo's segas. But they played games anyhow. They played games.
1 Why I chose Mia Hamm I chose Mia because I like soccer. She also likes soccer which means we have something in common. I think Mia is SO AMAZING! She.
PhotoDex.com Pro Show Presentation By Darwin Rybandt Please NO Questions until I finish, Thank you.
FUN WITH PHYSICS BY KYLE DEJOHN. CATAPULTS WE MADE CATAPULTS OUT OF RAT TRAPS WOOD HOT GLUE AND TAPE WE LAUNCHED THEM TO SEE WHICH SIDE OF THE ROOM COULD.
John Osterling Why I chose it I chose this intersession to learn about how catapults and rockets, trebucets and slingshots were made. In the following.
Egg Carrying Rocket Complete Your goal is to have your rocket looking something like this at the end of this section– fins attached and rocket engine block.
BETHS PENCIL BOX. This is a pictures of my 250 mm piece of wood This is my piece of wood cut half way and I am about to chisel it!
Rocket Project: Newton’s 3 Laws in 3D!.
Making the Chassis (1/4) Create Chassis: 1.Use the Xacto knife, metal straight edge, wood and cardboard to cut your pieces (Sides & Tops) for the chassis.
Nazaha Muntafi May-cie
Warm-Up 4/26/17 Take notes on what I say is important.
Catapult.
Day 1.
Pinhole Camera Project
Model Rockets Nose and Parachute Assembly.
Ballista Project 2 120mm Axle hole 3 Nails 1 200mm
Solar Funnel Cooker Inexpensive and easy
4th Grade Amazing Earth February
Standard I can determine what causes objects to speed up, slow down  or change direction Entry Task Go to Pg. 45 – Mouse trap car: Building Day 1 Learning.
Presentation transcript:

Fun With Physics Intersession By Joey Roeckner

Fun Projects I though that there were many fun projects during the time in this Intersession I though that there were many fun projects during the time in this Intersession One of the fun projects in this intersession were the Rockets every rocket had a different design which made its flight path vary One of the fun projects in this intersession were the Rockets every rocket had a different design which made its flight path vary

Fun Projects Cont. Another Fun project that I did were the Catapults. This was my favorite project because I always wanted to make one but I never knew how and now I do. Another Fun project that I did were the Catapults. This was my favorite project because I always wanted to make one but I never knew how and now I do. I also like making the Trebuchet because they are basically a catapult. I also like making the Trebuchet because they are basically a catapult.

Not so Fun Projects One of the projects I didn’t like were the mouse trap cars because I’ve made them before so it was boring for me and my car didn’t work. One of the projects I didn’t like were the mouse trap cars because I’ve made them before so it was boring for me and my car didn’t work. I also didn’t enjoy making the boomerangs, planes, and paper bridges because it involved too much gluing and cutting I also didn’t enjoy making the boomerangs, planes, and paper bridges because it involved too much gluing and cutting

Things I Have Enjoyed I have really enjoyed going to the Dayton Air force Museum……… even though I’ve been there at least 50 other times because my grandparents live in Dayton. I have really enjoyed going to the Dayton Air force Museum……… even though I’ve been there at least 50 other times because my grandparents live in Dayton. I had enjoyed the launching of the rockets because some of the rockets didn’t work right and almost hit several students on different occasions. I had enjoyed the launching of the rockets because some of the rockets didn’t work right and almost hit several students on different occasions.

Things I Have Enjoyed Cont. I enjoyed the making of the Catapults and Trebuchet and launching stuff out of them and competing with the other groups and trying to get our trebuchet to throw the corn hole bag the furthest. I enjoyed the making of the Catapults and Trebuchet and launching stuff out of them and competing with the other groups and trying to get our trebuchet to throw the corn hole bag the furthest. I also Enjoyed watching the movies. I really enjoyed the Movies “The Last Castle” and “The Flight of the Phoenix” I also Enjoyed watching the movies. I really enjoyed the Movies “The Last Castle” and “The Flight of the Phoenix”

What I Have Learned I have learned many things during this intersession. I have learned many things during this intersession. I have learned the proper use of some tools that I have never used before till this intersession. I have learned the proper use of some tools that I have never used before till this intersession. I have learned how to make many things that I didn’t know how to make before this intersession. I have learned how to make many things that I didn’t know how to make before this intersession.

Making The Catapults The first step I took was to nail the rat trap to a block of wood The first step I took was to nail the rat trap to a block of wood The second step I took was to nail two thin pieces of wood to the sides of the block of wood The second step I took was to nail two thin pieces of wood to the sides of the block of wood The third step I took was to tape another thin piece of wood to the hammer of the trap. The third step I took was to tape another thin piece of wood to the hammer of the trap.

Making The Catapults Cont. The forth step I took was to drill of hole in the two pieces of wood I nailed to the side. The forth step I took was to drill of hole in the two pieces of wood I nailed to the side. The last step was to pull back the hammer and put a rod through the drilled holes. The last step was to pull back the hammer and put a rod through the drilled holes. Then we played a little game where we tried to nock down cups with our catapults Then we played a little game where we tried to nock down cups with our catapults

Making Rockets The first step was to cut out the wings/fins of the rockets then glue them on The first step was to cut out the wings/fins of the rockets then glue them on The second step was to glue a little ring inside of the rocket to separate where the engine would be from the streamer. The second step was to glue a little ring inside of the rocket to separate where the engine would be from the streamer. The third step was to tie a string from the rocket onto the nose of the rocket. The third step was to tie a string from the rocket onto the nose of the rocket.

Making Rockets Cont. The fourth step was to tie a streamer onto the middle of the string. The fourth step was to tie a streamer onto the middle of the string. The fifth step was to stuff tissue paper in to the rocket. The fifth step was to stuff tissue paper in to the rocket. The sixth step was to glue a straw onto the side of the rocket. The sixth step was to glue a straw onto the side of the rocket. The last step was to paint the rocket and enjoy. The last step was to paint the rocket and enjoy.

Random Picture during the Intersession

Another Thing I didn’t Like DOING THESE ESSAYS!!!!!!!!!! DOING THESE ESSAYS!!!!!!!!!!