The history is cornerstone of the present time as well as challenge to the future Application of ZKL Bearings.

Slides:

Advertisements

Similar presentations

UBC Bearings of America Limited

Advertisements

M(Kg)d (mm)D (mm)B (mm) nG min-1)Cr (KN)Cor (KN) 1700/ CA.W33.EL Elevator Gearless Traction Machine Features and Advantage Permanent.

Cylinder Design Cylinder Liner (Barrel) Design

Lubrication Of Roller Bearings. Roller Bearings have a long history around 700 BC AC around 3000 BC.

Success Story on Stone Crusher Bearings

ROLLER BEARINGS. Bearings are used to support rotating shafts and are classified according to the direction of the main load: Axial bearings are designed.

Mechanical Engineering Dept.

Wheel Bearings.

ČKD Blansko Engineering, a.s. IGHEM 2012 Changing the Start-up Procedure of Francis Reversible Pump-Turbine to Improve its Stability in Turbine Mode Zdenek.

Dynamic Transmission Response of a Hydrostatic Transmission Results measured on a Test Bench J. Schmitz, N. Diepeveen, N. Vatheuer

October 30, 2007 © SKF Group Slide 0. Why is there no ideal bearing concept EWEC 2012 Presented by Reiner Wagner, Application Engineering Manager Renewable.

Rolling element bearings A. Lozzi 2012

MAGSEAL 101. Rotary face seal that utilizes magnetic attraction force to positively mate the optically flat seal faces. Magnetic attraction force variation.

1 TRC 2008 The Effect of (Nonlinear) Pivot Stiffness on Tilting Pad Bearing Dynamic Force Coefficients – Analysis Jared Goldsmith Research Assistant Dr.

ILC Target Wheel Rotordynamics Lisle Hagler 5/23/2007 UCRL-PRES This work was performed under the auspices of the U.S. Department of Energy by University.

Deep Water Offshore Wind Energy By Paul D. Sclavounos Horns Rev Wind Farm (Denmark) - Rated Power 160 MW – Water Depth 10-15m.

Copyright © 2011 Pearson Education South Asia Pte Ltd

Rolling Contact Bearing

Chapter Outline Shigley’s Mechanical Engineering Design.

CHAPTER 14 Wheel Bearings and Service

33rd Turbomachinery Research Consortium Meeting

Rolling element bearings A. Lozzi 09

Journal bearing, Ball bearing

Design of a Vertical-Axis Wind Turbine

Timken Learn and Lead Customer Training 5/17/2007Radial Ball Product Overview1 Radial Ball Bearing Product Overview Part B Narrated by David Beach Motion.

Prospects of Wind and Pumped Storage systems’ integration in Greek islands George Caralis Mechanical Engineer NTUA Wind Energy Laboratory.

Graduation Project Thesis

Renewable Energy Research Laboratory University of Massachusetts Wind Energy: State-of-the Art and Future Trends Southwest Renewable Energy Conference.

Structural option for the Jinping neutrino central detector Contributor ： Yuanqing Wang, Zongyi Wang Speaker ： Zongyi Wang Department of civil engineering,

Radial Ball Bearing Product Overview

BIKE TOOLS NEWS FOR YEAR REPAIR BIKE STAND  For home and professional use,  easy and quick mounting system,  rubber protected jaws to prevent.

WIND POWER Travis Toland. Overview History History How It Works How It Works Applications Applications Future Future.

Problem-1: A rigid coupling has a bore diameter of 50 mm. Four machined bolts on a bolt circle of 125 mm diameter and fitted in reamed holes. If the bolts.

Wheel Bearings. Bearing uses n Pivots n Wheels n rotating shafts n Oscillating shafts n Sliding shafts.

HYDRAULIC MOTORS.

Pump design Raimonds Nikoluskins CERN – LIEBE project coordination meeting.

Trends in the global wind energy market Rüsselsheim, Stefan Schilling

An alternative spectrograph mount Bruce C. Bigelow University of Michigan Department of Physics 5/14/04.

JSC CTC Metallokonstruktsiya Corrugated structures.

Lecture # 21 This chapter serves as a review of the stress analysis that has been developed in the previous chapters regarding axial load, torsion, bending.

14-6 LOAD/LIFE RELATIONSHIP

Timken Cylindrical Roller Bearing Product Overview Part A

Inner Triplet Review April 2007 Inner Triplet Supports Sonia Bartolomé Jiménez (TS/IC)

Wind Turbine Power Plant. Sources ●

Bearing Use in Design. Bearing Terminology BearingRacewayRolling ElementsCage Lubricant Seal=

00 Heat pumps by Kenneth Hoffmann. Why NH 3 Heat pump? NH 3 Heat Pump sizes Case stories CO 2 Heat Pump NH 3 Heat Pump applications NH 3 Heat Pump sizes.

World-Class Manufacturer & Solution Provider in Custom and Commodity Bearings.

Page 1 GSI, Hydraulic Actuators for PANDA Target Spectrometer Jost Lühning, GSI Darmstadt Functional Specifications for moving the TS: Two synchronous.

Bearings Types Plain Rolling Element Ball Roller Jewel Precision

BEARINGS Suported by. Introduction Different types of bearing are used extensively throughout our machines to join stationary part to a moving part. Suported.

AKHILESH KUMAR PRODUCTION ENGINEERING . 14UPE054

Assoc. Prof. Dr. Tarkan Erdik

The thrust bearing outer runner rubbing with bearing housing

Rolling element bearings A. Lozzi 2012

Mohammad Maher Jaradat Raghad Abdel-Salam Owaidat

Types of Ball Bearings Suported by.

Rolling Contact Bearings

Version NKE Bearings > Application examples in heavy, construction and mining machinery.

NKE AUSTRIA Competence in bearings for agricultural machinery

COMBINED DARRIEUS - SAVONIUS WIND TURBINE

Structure I Course Code: ARCH 208 Dr. Aeid A. Abdulrazeg

The Fundamentals of Bearings

Structure I Course Code: ARCH 208 Dr. Aeid A. Abdulrazeg.

NKE bearings for industrial gearboxes

Design and Electromechanical systems

Journal bearing, Ball bearing

Bearing Use in Design.

Copyright ©2014 Pearson Education, All Rights Reserved

Presentation transcript:

The history is cornerstone of the present time as well as challenge to the future Application of ZKL Bearings

► ► ◄ ◄ Concrete Mixers

► ► ◄ ◄

Railway Industry

Cross-split cylindrical roller bearing in “Sandvik, a. s. Chomutov” -outer diameter = mm -inner diameter = 260 mm -width = 170mm -dynamic load rating = 1,135 kN -static load rating = 1,937 kN -mass = 86.5 kg -outer diameter = mm -inner diameter = 260 mm -width = 170mm -dynamic load rating = 1,135 kN -static load rating = 1,937 kN -mass = 86.5 kg ► ► ◄ ◄ Steel Industry

Cross-split spherical roller bearing in mine “Nástup Tušimice, a. s.” -outer diameter = 1,000 mm -inner diameter = 750 mm -width = 360 mm -mass = 724 kg -outer diameter = 1,000 mm -inner diameter = 750 mm -width = 360 mm -mass = 724 kg ► ► ◄ ◄ Cross-split spherical roller bearing PLC in mine “OKD Darkov” Mining Industry

Bearings for heavy gearboxes: 23072W33M, 23068W33M ► ► ◄ ◄ Heavy Industry

Historically Heaviest Roller Bearing in ZKL Brno Production 232/750CFC2 For mounting of butterfly gate DN 5400 of CKD Blansko – pumped- storage hydro-electric power plant Dalesice Bore750 mm Outer diameter1360mm Width475 mm Mass3070 kg 232/750CFC2 For mounting of butterfly gate DN 5400 of CKD Blansko – pumped- storage hydro-electric power plant Dalesice Bore750 mm Outer diameter1360mm Width475 mm Mass3070 kg The entire process from designing manufacture and assistance in installation materialized within 5 months Designed for maximum load and service life of 25 years of operation Energy Industry

Windmills Double row spherical roller bearings of new design are particularly suitable for mounting of main rotors of wind turbines Capacity to accommodate combined loads of radial and axial forces as well as of tilting moments Designed for maximum reliability and minimum maintenance Double row spherical roller bearings of new design are particularly suitable for mounting of main rotors of wind turbines Capacity to accommodate combined loads of radial and axial forces as well as of tilting moments Designed for maximum reliability and minimum maintenance

Thank you for your attention!!