PROMET SA

2

Our Products Roofing nails Common nails Screw shank nails Ring shank nails Plastic collated smooth shank nails and ring shank nails Certificated epal nails

Coating: 3 methods Thermo diffusion Zinc Coating Hot Dip Zinc Coating Electrogalvanizing

Thermo Ddiffusion Zinc Coating We have started also apply Thermo Diffussion Zinc Coating.

Features: High corrosion resistance - Up to 1000 hours in a salt mist chamber, excellent for marine applications. Environmental friendly - Dry process, chromate free, and does not contain toxic elements and fully ecologically clean. No pre-treatment required - oily, greasy and 40% rusty surfaces can be coated with no pre-treatment. Working temperature - 450oC Passivity - provides excellent free-air conservation, with non- toxic materials. Strong adhesive coating - no peeling or cracking. High abrasion resistance - micro-hardness up to 1636 HV, prevents nut seizure in stainless steel bolts. Uniform coating - even on tubes and internal surfaces. Thickness of coating µ, 50% under surface and 50% over surface layer. No Zinc build-up - no grinding of excess zinc. Low diffusion temperature oC Steel annealing could be part of galvanizing process for extra saving. Excellent base for paint or rubber bonding - no profiling, high spots removal, roughening or primer required.

Hot Dip Zinc Coating Our nails are submitted hot dip zinc coating, which is good technique against steel corrosion. Zinc coated elements do not corrode for approximately 50 years while paint coating lasts maximum 10 years.

Roofing nails Type* 30x40 30x25 30x30 * We could also produce nails of various dimensions on the special order

Common nails Type* 25x60 28x x x x x125 50x150 60x180 70x * We could also produce nails of various dimensions on the special order

Screw shank nails Type* 28x50 – 60 28x x50 – 60 31x x50 – 60 33x x * We could also produce nails of various dimensions on the special order

Pallet nails Type* RING SHANK 34x70 34x90 29x40 SMOOTH SHANK 28x55 25x55 25x55 S * We could also produce nails of various dimensions on the special order

Ring Shank Nails Type* 25x x60 – 80 30x40 30x x x70 – 90 38x x100 – x125 We could also produce nails of various dimensions on the special order

Plastic collated smooth shank nails and ring shank nails Type* 28x50 28x60 28x65 28x70 28x75 28x80 31x60 31x70 31x80 31x90 31x100 We could also produce nails of various dimensions on the special order Nails are connected at an angle of 17° and 21°

Contact: PROMET SA 1 Maja Street Starachowice Poland

Localization in Starachowice

Phone: Telephon number: 0048/(0) Fax: 0048/(0)

E - mail

THANK YOU