VEX Parts - Motion Robotics – 8

VEX Parts - Motion 2-Wire Motor 269 Add motors to power more wheels or add an end effector to take your robot to the next level.

VEX Parts - Motion The 2 Wire Motor 393 provides 60% more output power than the standard motor, which allows for more powerful mechanisms and drive bases. Strong, steel internal gears. Can be configured into a "high speed" version.

VEX Parts - Motion Gear Kit This kit contains four sizes of VEX Spur Gears (12-, 36-, 60-, and 84-tooth gears). The 60- and 84- tooth gears have extra mounting holes. Create robot transmissions, gearboxes, and gear reductions. Vary the speed or torque of robot motion systems. Increase design possibilities for your robots.

VEX Parts - Motion Advanced Gear Kit This kit provides several options for advanced motion. These parts allow advanced mechanical VEX designers to create new ingenious mechanisms. Create Linear Motion with the Rack Gears. Transfer Motion 90 degrees with Bevel Gears. Add a Differential to your Drivetrain. Get a high-reduction with the Worm Gears.

VEX Parts - Motion Intake Roller

VEX Parts - Motion Sprocket & Chain Kit The six different sprocket sizes allow for a variety of ratios. Great for any application where you need to transfer power across long distances. Transfers power effectively over long distances. Designed to carry moderate loads. Every section of chain is a master link. (14) Sprockets in (5) Sizes.

VEX Parts - Motion Tank Tread Kit Use this tank tread to build robot tracks which can overcome tough terrain, or build a conveyor belt for scooping up objects. Climb over obstacles and traverse tough terrain. Drive through sandy or soft spongy surfaces. Can be used for a robot conveyor belt. Every section is a master link, create treads of any length.

VEX Parts - Motion 2.75" Omni Directional Wheel - Double Roller (2- pack) Omni-Directional wheels roll forward like normal wheels, but slide sideways with almost no friction (no skidding during turns). Use these wheels to make your robot turn smoothly or build a holonomic drivetrain. 2.75" diameter 14 rollers per wheel

VEX Parts - Motion 4" Omni-Directional Wheel (2-pack) Omni-Directional wheels roll forward like normal, but slide sideways with almost no friction. Use these wheels to make your robot turn smoothly. 4" Omni Wheels roll sideways with very little friction. Minimize skidding during turns. Build a holonomic drive.

VEX Parts - Motion 2.75" Wheel (4- pack) A pack of (4) of the VEX 2.75" diameter Wheels. These wheels include a smooth grippy tire which has high traction on smooth surfaces. High Traction rounded tread. Removing the tread make a low-friction wheel.

VEX Parts - Motion 4" Wheel (4-pack) A pack of (4) of the VEX 4" diameter wheels. These wheels include a tire which works well on any surface. High Traction square tread. Removing the tread leaves a ribbed plastic wheel.

VEX Parts - Motion 5" Wheel (4-pack) A pack of (4) of the VEX 5" diameter Wheels. These wheels include a knobby tire which works great on rough terrain or loose surfaces. High Traction rough knobby tread. Removing the tread leaves a ribbed plastic wheel.

VEX Parts - Motion Mecanum Wheel 4" (4-pack) Mecanum wheels allow savvy robot designers to create drivetrains capable of moving in any direction using a standard chassis shape. Simply power each wheel with a different motor and by changing the directions the wheels spin get your robot to move in different directions! Allows robots to move in any direction. Split Roller style design. 14 rollers per wheel.

VEX Parts - Motion Shaft Coupler (5-pack) Shaft couplers are the same length as old VEX clutches, allowing 2- Wire Motors to be used in places that previously had a clutch without changing shaft length. Makes replacing 3-Wire Motors quick and simple. Placement between motor and drive shaft makes changing shafts easier.

VEX Parts - Motion Clutch (3-pack) For use with a VEX Continuous Rotation Motor or VEX Servo. (3) Clutches (3) Short Axles for Clutches

VEX Parts - Motion Drive Shafts (2-choices) The square shaft has rounded corners which allow it to spin easily in a round hole, while locking to a square hole. Three length: 2", 3", and 12". Use the 12" to make your own custom length shafts. Works with motors, wheels, gears, and bearings.

VEX Parts - Motion Pillow Block Bearing & Lock Bar Pack Bearing Blocks mount on a piece of structure and supports a shaft which is offset either above, below, or to the side of the structure. Lock Bars allow any VEX component to be “locked” to a shaft so that it will spin with the shaft. Bearing blocks mount on a piece of structure to support a shaft. Lock Bars allow VEX components to be "locked" to a shaft.

VEX Parts - Motion Bearing Flat, Delrin (10-pack) The Bearing Flat mounts directly on a piece of VEX structure and supports a shaft which runs perpendicular and directly through the structure. Low friction allows shafts to turn smoothly. Mount with Screws & Nuts or Pop Rivets

VEX Parts - Motion Shaft Collar (16-pack) Collars lock to drive shafts, keeping wheels and gears from sliding along the shaft. Collars fit around Drive Shafts and can be fastened in place using a setscrew. Designed specifically for the VEX Drive Shaft. Set screw uses the same Allen Wrench as the 6-32 Motor Screws.

VEX Parts - Motion Washers (2-choices) A washer is a thin disk with a hole used to distribute the load of a threaded fastener. All VEX washers fit on all VEX screws and VEX shafts. Steel washers are a good all-purpose washer. Teflon washers are low friction. Use on shafts where metal rubs on metal.

VEX Parts - Motion Spacers (3- choices) A spacer is used to create a space between two objects, often to properly position them. Available in various lengths. Eliminate slop on shafts. Add space between metal parts. Plastic and Nylon.

VEX Parts - Motion Claw Kit Easily grab and manipulate various objects. Motor required and not included. Strong Enough to hold a 12 oz soda can. Dexterous Enough to grab a Feather. Compatible with all VEX Mechanical Parts.

VEX Parts - Motion Winch and Pulley Kit This kit provides the ability to implement a winch and pulley system and create block and tackle mechanisms to utilize mechanical advantage. Lift, lower, hang, drag and more. Configurable for many applications. Ratchet and Pawl can be engaged to prevent back driving.

VEX Parts - Motion Pneumatics Kit 1 - Single Acting Cylinders Complete pneumatics add-on for the VEX Robotics system. Uses one VEX Controller I/O port per air cylinder Reservoir is filled using a standard tie pump fitting Single Acting cylinder kit (air push, spring return)