Part Three Tests of Controls and Tests of Details Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Chapter 9 Tests of controls Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Learning objective 1: Tests of controls When control risk is assessed at less than high, it is necessary to gather evidence that controls are working. This evidence is gathered via a test of controls. If control risk is assessed at high, the auditor will not undertake test of controls. Auditor selects most efficient and effective combination of tests of controls, and substantive tests of transactions, balances and disclosures. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Assessing control risk To assess control risk as high, auditor must expect not to rely on evidence from the internal control system and that substantive procedures alone will provide sufficient appropriate evidence. Areas where substantive procedures alone may not provide sufficient appropriate evidence include routine recording of significant classes of transactions, such as revenue or purchases. These systems are often highly automated with little or no manual intervention. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Planning the scope of tests of controls Nature: refers to type of tests, tests of controls or substantive testing. Also refers to type of evidence-gathering procedures (e.g. inspection, observation). Timing: to aid ability to meet deadlines and scheduling of staff, tests of controls sometimes scheduled before year-end. Testing then extended (rolled forward) until year-end. Extent: the more the auditor relies on controls, the greater the extent of tests of controls. For tests of controls related to documents, extent determined by reference to sampling theory. Controls related to accounting routines (e.g. bank reconciliations) usually tested by re-performing a small number. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Learning objective 2: Existence, effectiveness and continuity of controls For internal controls to provide audit evidence about risk of material misstatements at the assertion level, the auditor must collect audit evidence about the existence, effectiveness and continuity of controls. Evidence of existence of controls is usually gained when auditor is assessing control risk. Tests of controls are aimed at establishing their effectiveness and continuity. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Aspects of internal control Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Learning objective 3: Sufficiency and appropriateness ASA/ISA 500.6 requires the auditor to consider the sufficiency (quantity) and appropriateness (quality) of audit evidence. Dependent on the level of control risk the tests must support. The lower the planned assessed level of control risk, the greater the amount of testing that is required. Auditor should also consider: Type and source of evidence Interrelationship of evidence. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Effect of documentation of controls: audit trail Method used by auditor is dependent on whether a documentary audit trail (discussed chapter 8) exists. Where no audit trail exists, greater emphasis is placed on: Observation Inquiry of the control. If audit trail does exist: Inspect documentation associated with the transaction for evidence of the control. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Relationship between tests of controls and assertions Auditor is required to assess risk of material misstatement at the assertion level for classes of transactions, account balances and disclosures. When auditor’s assessment of material misstatement at assertion level includes an expectation that controls are operating effectively, the auditor should perform tests of controls to obtain evidence that the controls were operating effectively during the audit. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Assertions and testing control elements For first two elements of IC (control environment and entity’s risk assessment process), controls relate less directly to financial report assertions. For remaining three elements of IC (information system, control activities and monitoring of controls), controls are built around major flows of transactions and events and related accounts (e.g. sales, receivables and cash receipts). For these elements it is possible to link many controls to assertions (e.g. occurrence — control related to occurrence of sales transactions is an authorisation of the terms of the sale). Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Learning objective 4: Revenues, receivables and receipts (sales cycle) Sales cycle involves all those transactions and events that are initiated when an entity makes a sale. It is commonly characterised by a high volume of routine transactions. Risks of material misstatement are commonly related to high-volume clerical processing rather than complex accounting problems. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Key functions in typical revenue, receivables and cash receipts cycle Sales/Accounts Receivable Order entry and order approval by credit department Shipping Invoicing Accounting: sales journal, accounts receivable master file. Accounts receivable/Cash receipts Mail opening Accounting: accounts receivable master file, cash receipts journal. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Typical credit sales flowchart Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Typical cash collection flowchart Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Sales cycle: routine and non-routine transactions Usually well controlled, and well suited to tests of controls (such as sales and cash collections). Non-routine transactions: Such as the return of goods or the estimates of the doubtful debts provisions: internal control systems not usually as well developed, and therefore less likely to test controls and more likely to undertake substantive tests of transactions. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Primary control-related features The primary control-related features of a sales accounting system are: Segregation of duties – separation of the departments or functions is usually an integral part of the plan of organisation. Control over sources documents and inputs – the source documents created during processing, such as shipping documents, invoices and credit notes, should be printed on pre-numbered forms. Checks, approvals and reconciliations – additional overlays for control purposes. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Control objectives for sales system Controls are in place to ensure that: Occurrence — all sales recorded are bona fide transactions for merchandise actually shipped to customers. Completeness — all sales shipped are invoiced and recorded in accounting records. Accuracy — invoices have been recorded correctly as to amount and summarised correctly. Cut-off — invoices have been recorded in correct period. Classification — sales classified in accordance with written policies. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Special control objectives Common control policies and procedures Example of linking objectives to control policies and tests of controls for sales (Ref. Table 9.4) Special control objectives Common control policies and procedures Tests of controls Occurrence — all sales recorded are bona fide transactions for merchandise actually shipped to customers. Policy of authorisation of credit and terms Evidence of quantities shipped reconciled to quantities invoiced Monthly statements mailed to customers and queries followed up Select sample of sales transactions from sales journal (daily activity report), check for authorisation and trace to shipping document file Inspect reconciliation of shipments to invoices Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Control objectives for cash receipt system Controls are in place to ensure: Occurrence — recorded cash receipts are for collection of receivables resulting from sales to customers of the entity. Completeness — all cash receipts are recorded and deposited. Accuracy — cash receipts have been recorded correctly as to amount. Cut-off — cash receipts have been recorded in correct period. Classification — cash receipts are classified in accordance with company policy. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Special control objectives Common control policies and procedures Example of linking control objectives to control policies to tests of controls: cash receipts (Ref. Table 9.5) Special control objectives Common control policies and procedures Test of controls Occurrence — recorded cash receipts are for collection of receivables resulting from sales to customers of the entity. Cash receipts matched to specific sales invoices in posting to accounts receivable master file. Select a sample of entries in cash receipts journal and review evidence that they were matched to specific sales invoices. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Types of potential misstatements Generally result of: Clerical mistakes Employee fraud Misapplied accounting principles, especially around some revenue recognition issues. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Learning objective 5: Expenditures, payables and disbursements Expenditure cycle: all transactions and events initiated when an entity acquires assets or services used for cash or credit. This cycle often separated into a number of sub-cycles, reflecting the various types of services and assets that can be acquired, including: Payroll Property, plant and equipment Inventory Income taxes Selling and administrative expenses Miscellaneous expenses paid from petty cash. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Key functions within the inventory sub-cycle Purchasing from approved suppliers Receiving Accounts payable, including recording the purchase and the account payable Payments department, including recording the payment and reducing the account payable. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Typical purchases and cash payments flowchart Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Functions, documents, inputs and accounting systems A type of expenditures accounting system is called a voucher system. A voucher system is designed to improve control over disbursements by establishing a sequential pre-numbered record of suppliers’ invoices and to improve efficiency by eliminating inessential record keeping and facilitating timing of payments. The documents that form the voucher package are the purchase order, receiving report and supplier’s invoice. Once these three documents are received and reviewed, the voucher can be processed for payment. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Primary control-related features The primary control-related features of the expenditures cycle are concerned with: Segregation of duties – especially between the handling and recording of assets, such as handling of inventory and the recording of inventory and cash payments. Control over source documents – the source documents used in accounts payable processing should be pre-numbered, (including vouchers) and these sequences should be accounted for. Checks, approvals and reconciliations – includes comparing source documents, such as purchase order, receiving report and sales invoice; and the periodic reconciliation of physical holdings of assets to accounting records, such as stocktake. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Control objectives for purchases of inventory Controls are in place to ensure: Occurrence — all recorded purchases are bona fide transactions in that they relate to goods or services authorised or received. Completeness — all purchases for the period of inventory received are recorded. Accuracy — purchases of inventory are recorded correctly as to amount and summarised correctly. Cut-off — purchase invoices have been recorded in correct period. Classification — purchases are classified in accordance with classification policies. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Special control objectives Example of linking control objectives, controls and test of controls: purchases Special control objectives Common controls Tests of controls Occurrence — all recorded purchases are bona fide transactions in that they relate to goods or services authorised or received. Approval of purchase order Goods received are counted, inspected and compared to purchase order before acceptance Comparison of purchase order, receiving report and supplier’s invoice and recomputation of supplier’s invoice before recording liability Examine evidence of approved purchase and service orders Select a sample of order entries in purchases journal, trace back to vouchers and inspect supporting documentation including receiving report, ensuring agreement of details and indication of approval From Table 9.6 Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Control objectives in a cash disbursements system Controls are in place to ensure: Occurrence — recorded cash disbursements are for goods or services authorised and received. Completeness — all cash disbursements are recorded. Accuracy — cash disbursements are recorded correctly as to amount. Cut-off — cash disbursements recorded in correct period. Classification — cash disbursements are recorded correctly as to account. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Special control objectives Common control policies and procedures Example of linking control objectives, controls and test of controls cash disbursements (Ref: Table 9.7) Special control objectives Common control policies and procedures Tests of controls Occurrence — recorded cash disbursements are for goods or services authorised and received. Cheques printed or prepared only when receipt of goods or services and approval are documented (e.g. supporting documents compared, recomputed and voucher approved) Cheques signed only after viewing supporting documentation and prior approval Supporting documentation cancelled and reference to cheque number Select a sample of cash disbursement transactions from cash payments journal and inspect supporting documentation for indication of checking, review and approval Observe and inquire about cheque preparation and signing and protection of unissued cheques For the sample of cash disbursement transactions inspect supporting documents for cancellation, cheque number and endorsement Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Potential fraud in expenditure cycle As expenditure cycle involves disbursements of cash there is a greater risk of fraud or irregularity, including: Classic disbursements fraud Kickbacks Illegal acts Unauthorised executive perks Kiting. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Learning objective 6: Selling and administrative expenses Processing and related control policies and procedures for selling and administrative expenses are similar to those for purchases of inventory. Auditor will normally obtain comfort from cash disbursement testing for inventory purchases and perform minimal testing in this area. Analytical procedures (e.g. comparing various expenditure balances with budgets and prior periods) widely used as a key type of testing. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Petty cash disbursements Petty cash disbursements are usually immaterial in amount and therefore few, if any, audit procedures are applied to this area. Where the area is significant, emphasis is on ensuring appropriate procedures are in place to safeguard cash. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Payroll The payroll function is usually audited in either of two ways (or best combination): Focusing on analytical procedures (disaggregated and strong relationships in this area, e.g. comparing fortnightly payrolls). Tests of transactions over the payroll area with a key control being appropriate segregation of duties in the hiring, approval of time worked, payroll preparation and payroll distribution functions. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Payroll (cont.) If tests of controls are necessary, the following audit procedures may be undertaken: Authorisation by supervisors of time worked Check signed time cards/sheets Check use of approved pay rates (personnel department) Check for reasonableness, compared with awards. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Interest, rent, lease and insurance payments Auditor usually takes a more substantive approach, which includes checking terms and conditions of contracts (these transactions usually involve contractual agreements). Auditor interested in the key control of authorisation of the contract. Accounting treatment of leases is complex, and auditor may check controls that ensure leases are properly accounted for in accordance with accounting standards. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Learning objective 7: Testing controls in client computer programs Separate techniques have to be developed for testing programmed controls (discussed in chapter 8). These are: Test data Integrated test facility Processing client data Reviewing program code or results of job processing. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Processing of test data Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Integrated test facility Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Processing client data Controlled processing: auditor establishes control over processing of client’s data. Controlled reprocessing: auditor reprocesses client data. Parallel processing: simultaneous processing of client’s data through client and auditor programs. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Review clients’ program code or the results of job processing Program code review involves the auditor reviewing the client’s program documentation and the source code. The auditor goes over the relevant code and considers whether the processing steps and control activities are properly coded and logically correct. Review of job (batch) accounting data involves the auditor reviewing the printed log produced as jobs (batches of transactions) are processed, and considers any excessive processing time, error conditions or abnormal halts which may indicate problems. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett

Advanced computer-assisted audit techniques (CAATs) Systems control audit review file (SCARF) Audit modules embedded in programs to monitor transaction activity. Snapshot Transactions are tagged and then identified at certain points during processing to see how program is treating them. Audit hooks Points in program that allow auditor to insert commands for special processing. Copyright  2010 McGraw-Hill Australia Pty Ltd PPTs t/a Auditing and Assurance Services in Australia 4e by Grant Gay and Roger Simnett Slides prepared by Roger Simnett