First question Marks: % 30 First question Marks: % 30

Choose the correct complement (complements) for the following statements by checking mark  in the box. Answer The dynamic height measured by:  Gal.  Gal. meter,  Meter.

Choose the correct complement (complements) for the following statements by checking mark  in the box. Answer The geopotential surfaces are:  Ellipsoidal,  parallels to geoid,  physical surfaces,  parallel to earth's topography.

Choose the correct complement (complements) for the following statements by checking mark  in the box. Answer First-order triangulation points are established by:  resection and intersection,  Astronomical methods,  Base extension net,  The gravitational methods.

Choose the correct complement (complements) for the following statements by checking mark  in the box. Answer Legendre's theorem applied in reducing:  spherical triangle to plane triangle,  plane triangle to spherical triangle,  sphere to plane,  length on topography to ellipsoid.

Choose the correct complement (complements) for the following statements by checking mark  in the box. Answer The reduced measured distance to the ellipsoid is:  Normal section,  geodetic line,  Arc of circle.

The dynamic height measured by:  Gal.  Gal. meter,  Meter. Choose the correct complement (complements) for the following statements by checking mark  in the box. 

The geopotential surfaces are:  Ellipsoidal,  parallels to geoid,  physical surfaces,  parallel to earth's topography. Choose the correct complement (complements) for the following statements by checking mark  in the box. 

First-order triangulation points are established by:  resection and intersection,  Astronomical methods,  Base extension net,  The gravitational methods. Choose the correct complement (complements) for the following statements by checking mark  in the box.  

Legendre's theorem applied in reducing:  spherical triangle to plane triangle,  plane triangle to spherical triangle,  sphere to plane,  length on topography to ellipsoid. Choose the correct complement (complements) for the following statements by checking mark  in the box.  

 The reduced measured distance to the ellipsoid is:  Normal section,  geodetic line,  Arc of circle.

Second question Marks: % 40 Second question Marks: % 40

Answers Calculate the height of a geodetic mark on point B considering effects of: curvature of earth's surface; vertical refraction; height of point B above the instrument surface A. Where: Distance= 30 km; refraction constant= 0.15; H A =300 m; H B = 355 m; instrument height= 1.6 m; R= 6371 km.

Third question Marks: % 30 Third question Marks: % 30

Answers A distance D were measured between two points A and B by the normal section. Find out the reduced distance between A and B to the geodetic line by Euler theorem. Where: α = 45˚; φA = 60˚; a = ; b = ; H A = 240 m; H B = 300 m; D= 12 km; R = 6371 km

effects of curvature of earth's surface effects of vertical refraction effects of height of point B above A

reduced distance between A and B

Good Luck