Phase 2 – Develop the Revised Plan

Cities and Counties have land use plans – so do national forests Cities and counties may have residential areas, commercial areas, mixed-use areas – national forests ALSO have areas for different mixes of uses

What Happened in 2013 – the Assessment Phase February-March 2013 – 6 public meetings to get ideas for the Assessment May 2013 – 2 public meetings to discuss high interest topics: WWWWildlife habitats, and especially the lack of young forest (a.k.a. early successional, ESH, previously called 0-10 year old forest ) RRRRecreation and access DDDDesignated Areas – what should be designated and what should NOT be designated November-December 2013 – 6 public meetings to hear ideas about how the current plan needs to change.

What’s happening in 2014 – the Plan Development Phase WW hat do we want these national forests to be like in the future? HH ow much and what kinds of management will need to happen for us to get there? WW hat sideboards or limitations on activities are necessary? WW hich portions of the national forests are suitable for various mixes of the multiple uses?

National Forests are managed for Multiple Use and Sustained Yield Outdoor Recreation Experimental Forests Threatened and Endangered Species Wildlife and Fish Wilderness Timber Research Natural Areas Special Interest Areas Water Wild and Scenic Rivers

National Forests are managed for Multiple Use and Sustained Yield Outdoor Recreation Experimental Forests Threatened and Endangered Species Wildlife and Fish Wilderness Timber Research Natural Areas Special Interest Areas Water Wild and Scenic Rivers

Inventory of Potential Additions to Wilderness WHY ? It is required as a part of the process for revising the land management plan

(v) Identify and evaluate lands that may be suitable for inclusion in the National Wilderness Preservation System and determine whether to recommend any such lands for wilderness designation. FEDERAL REGULATION: As part of the plan development process....

Share the range of perspectives about wilderness Share the range of perspectives about wilderness Share the purpose of the inventory Share the purpose of the inventory Share and discuss the inventory process and identity concerns and potential solutions Share and discuss the inventory process and identity concerns and potential solutions Establish a path forward to a final inventory most people can live with Establish a path forward to a final inventory most people can live with Objectives for this morning:

Ideas and comments collected in November and December including comments about wilderness... Sorting Comments

What have we heard from participants so far? No Wilderness Reduce Wilderness Increase Wilderness Keep the Same Amount Everything is Wilderness

“where the earth and its community of life are untrammeled by man, where man himself is a visitor who does not remain…an area of undeveloped Federal land retaining its primeval character and influence, without permanent improvements or human habitation, which is protected and managed so as to preserve its natural conditions and which (1) generally appears to have been affected primarily by the forces of nature, with the imprint of man's work substantially unnoticeable; (2) has outstanding opportunities for solitude or a primitive and unconfined type of recreation;….” What is wilderness?

Existing wilderness areas of the Nantahala and Pisgah National Forests Shining Rock Shining Rock Middle Prong Middle Prong Linville Gorge Linville Gorge Southern Nantahala Southern Nantahala Ellicott Rock Ellicott Rock Joyce Kilmer-Slick Rock Joyce Kilmer-Slick Rock 66,550 acres 6.4% of Nantahala and Pisgah NFs

Existing wilderness study areas of the Nantahala and Pisgah National Forests Harper Creek (recommended) Harper Creek (recommended) Lost Cove (recommended) Lost Cove (recommended) Craggy Mountain (recommended) Craggy Mountain (recommended) Snowbird (not recommended) Snowbird (not recommended) Overflow (not recommended) Overflow (not recommended) 26,920 acres 2.6% of Nantahala and Pisgah NFs

Potential Additions to Wilderness 1. Inventory – the starting point 2. Evaluate – for wilderness characteristics 4. Determine whether to recommend for wilderness We are Here 3. Determine which areas to include in the draft plan (and analyze in the DEIS)

Potential Additions to Wilderness 1. Inventory – 2. Evaluate – for wilderness characteristics (WC) 4. Determine whether to recommend for wilderness We are Here 3. Determine which areas to include in the draft plan (and analyze in the DEIS)

Potential Additions to Wilderness 1. Inventory 2. Evaluate – for wilderness characteristics (WC) 4. Determine whether to recommend for wilderness 3. Determine which areas to consider for the revised plan (and analyze in the DEIS) Less WC More WC

 Appears primarily affected by the forces of nature (naturalness)  Outstanding opportunities for solitude and a primitive or unconfined type of recreation.  Presence of ecological, geological, or other features of scientific, educational, scenic, or historical value.  Can it be managed to preserve wilderness character Shape and configuration Shape and configuration Presence of non-Federal land Presence of non-Federal land Management of adjacent land Management of adjacent land Wilderness Characteristics:

Potential Additions to Wilderness 1. Inventory 2. Evaluate – for wilderness characteristics (WC) 4. Determine whether to recommend for wilderness ?? 3. Determine which areas to consider for the revised plan (and analyze in the DEIS)

If an area in the inventory isn’t recommended as an addition to wilderness, what happens post-revision? Inclusion in the inventory of potential additions to wilderness IS NOT a designation that conveys or requires a particular kind of management. - Propose directive FS , Version 02/14/ Propose directive FS , Version 02/14/2013

Potential Additions to Wilderness What has been recommended recently in other southern national forest revisions? Uwharrie National Forest (2012) – 2 parcels adjacent to existing wilderness totaling 7.1 acres Ouachita National Forest (2005) – 3 parcels adjacent to existing wilderness totaling 1,793 acres George Washington DRAFT revised plan (2014) – 4 parcels totaling 62,670 acres (three adjacent to existing wilderness plus one stand-alone area) National Forests in Mississippi DRAFT revised plan (2014) – no areas recommended for wilderness

Inventory Process – what to look for IDEALLY– a large block of forest land with little or no evidence of human development or human management other than trails, with only primitive, out-of-use roads (Level 1 roads), or with no roads.

Inventory Process – what to consider The inventory is intended to be reasonably broad and inclusive The inventory is intended to be reasonably broad and inclusive SO WHERE DO YOU START LOOKING? Start with information from the assessment, including information about designated areas (e.g. Inventoried Roadless Areas) and transportation infrastructure. There are over 150,000 acres of IRA. Start with information from the assessment, including information about designated areas (e.g. Inventoried Roadless Areas) and transportation infrastructure. There are over 150,000 acres of IRA. Also – “areas that have been proposed for consideration as recommended wilderness through public involvement during the assessment or previous forest planning processes.” Also – “areas that have been proposed for consideration as recommended wilderness through public involvement during the assessment or previous forest planning processes.”

What are I nventoried R oadless A reas? Established by Federal Regulation in early 2001 Established by Federal Regulation in early 2001 There are 33 IRAs across Nantahala and Pisgah National Forests, totaling over 150,000 acres There are 33 IRAs across Nantahala and Pisgah National Forests, totaling over 150,000 acres IRA status can only be changed through another federal regulation or by congressional action. However, dual designation as IRA and recommended wilderness is possible. IRA status can only be changed through another federal regulation or by congressional action. However, dual designation as IRA and recommended wilderness is possible.

What are I nventoried R oadless A reas? In general, road construction, road reconstruction, is NOT permitted in IRAs. Road maintenance is permitted. In general, road construction, road reconstruction, is NOT permitted in IRAs. Road maintenance is permitted. Timber production is NOT permitted. However some tree cutting incidental to permitted management activities (such as prescribed burning) IS permitted. Timber production is NOT permitted. However some tree cutting incidental to permitted management activities (such as prescribed burning) IS permitted. Motorized equipment (such as chainsaws) ARE allowed in IRAs and mechanical transport (such as mountain bikes) may be allowed. Motorized equipment (such as chainsaws) ARE allowed in IRAs and mechanical transport (such as mountain bikes) may be allowed.

Inventoried Roadless Areas (IRAs) Other areas recommended during the assessment often were in part coincident with IRAs

Inventory Process – what to consider MUST meet one of the following: The area contains 5,000 acres or more. Less than 5,000 acres but practical to preserve in an unimpaired condition, such as a self-contained island or canyon. Areas contiguous with existing wilderness, primitive areas, administratively recommended wilderness, or wilderness inventories of Federal ownership, regardless of size.

Inventory Process – what NOT to consider Road Improvement Criteria – Exclude areas that contain: Roads that are open any part of the year or that are maintained by mechanical means Roads with easements Roads identified for continued public access and use Roads that have cumulatively degraded wilderness character

Inventory Process – what NOT to consider Other exclusions: Areas where vegetation treatments are substantially noticeable Areas of mining that are substantially noticeable Developed recreation sites Permanent linear rights-of-way (e.g. a cleared power line, railroads) Substantially noticeable watershed treatment areas

What we have done to jumpstart the inventory

STEP 1: Make a map with existing wilderness, wilderness study areas, inventoried roadless areas, other areas recommended by the public, roads (other than level 1), wildlife openings, recent timber regeneration harvest areas, and property boundaries. STEP 2: Revision team members and district staff using Forest Service data, satellite imagery, and personal knowledge, consider each area.

STEP 3: Eliminate areas clearly less than 5,000 acres unless they share a border with an existing wilderness or recommended wilderness study area. STEP 4: Exclude portions of areas that contain excludable improvements; refer to items a) through d) of process paper STEP 5: Draw the lines on the maps

STEP 6: If the hand drawn area still appears to meets the minimum size, Digitize the area into the GIS database and calculate the approximate acres using GIS technology STEP 7: Produce maps of each district with the VERSION 1 Inventory displayed

For each Area Considered: 1.Does it meet the SIZE criteria? 2.Does it contain areas of roads to exclude? 3.Does it contain areas of substantially noticeable vegetation management? If so, exclude that portion of the area. 4.Are there easements or rights-of-way to avoid? If so, exclude that portion of the area.

For each Area Considered: 5.Are there any other substantially noticeable development? If so, exclude that portion of the area. 6. Are there portions of the area less than ½ mile wide? If so, exclude those portions of the area. 7.Does it STILL meet the size criteria?

What we debated: Where do we draw the preliminary boundaries? What do the words “substantially noticeable” mean? What portion of an area do we exclude when there are multiple factors present? What distance should the boundary back away from an excluded road? How do we negotiate the “reasonably broad and inclusive” direction with what makes sense from a manageability perspective?

MAP VIEW A portion of Appalachian and Grandfather Ranger Districts Just northeast of Black Mountain 5 Inventoried Roadless Areas Woods Mountain

Wilderness Society’s proposed Mountain Treasure Area – Black Mountains An area of consideration in the initial inventory. Mt. Mitchell State Park

12,426 There is a cleared right-of- way that divides the area Bearwallow – 4,115 acres. Does not meet the size criteria for the inventory Black Mountains area DOES meet inventory criteria Black Mountains Bear Wallow

The area of a road is excluded The area of recent vegetation management is excluded

 Areas considered: 57  After criteria applied: 34  Stand alone areas: 20 (151,555)  Areas adjacent to Wilderness or Recommended WSA: 14 (46,811) Our Preliminary INVENTORY Results: TOTAL acres 198,366 +/- 19% of Nantahala and Pisgah

What happens to the inventory areas that aren’t recommended for wilderness? That Depends: If it’s an IRA (Inventoried Roadless Area) there are still regulations in place that limit some of our forest management options. That doesn’t change. If it isn’t an IRA, the area will be considered for multiple use management just like the rest of the national forests. There is no residual impact just from being in the inventory of potential additions to wilderness.

What we’re asking you to discuss today: Recognizing that everyone in this room would likely draw the boundaries a bit differently, even using the same rules we used, to what degree can you live with the process we’ve described to identify the inventory areas ? Part 1: Discussion Questions for each table. Part 2: Take a look at each of the six maps. Bring up any specific reaction to a specific area.

No Wilderness Reduce Wilderness Increase Wilderness Keep the Same Amount Everything is Wilderness

Give instructions for small groups