Introduction Ease of Availability Testing Conclusions References Acknowledgments Battery Power Comparison to Charge Medical Devices in Developing Countries.

Slides:



Advertisements
Similar presentations
Batteries and Fuel Cells
Advertisements

Chapter 20 Electrochemistry
NPRE 498 Energy Storage Systems Garrett Gusloff 11/21/2014
B Y A LLEN D E A RMOND AND L AUREN C UMMINGS.  Generates electric power using a fuel and an oxidant  Unlike a battery, chemicals are not stored in the.
EET Electronics Survey Chapter 17 - Batteries.
Electricity from Chemical Reactions
Battery Technology Cheryl Salmonson 10/6/14.
Harnessing the Power of Voltaic Cells Batteries and Corrosion
Cells & Batteries. Primary Cells these cells cannot be easily re-charged; once they die… they stay dead.
 Fuel cell: A device that converts chemical energy into electrical energy.  In the hydrogen- oxygen fuel cell, both cathode and anode are made of porous.
Commercial Voltaic Cells A voltaic cell can be a convenient, portable source of electricity. We know them as batteries. Batteries have been in use for.
Electrochemistry III. QUESTION Meals Ready to Eat (MREs) were developed during the Vietnam War. They need hot water to be reconstituted. The military.
Comparison of a Button Cell to a Dry Cell
Anode: Zn (s) Zn 2+ (aq) + 2e - (simplified) Cathode: (simplified reaction) 2 NH 4 + (aq) + 2MnO 2(s) + 2e - Mn 2 O 3(s) + 2 NH 3(aq) + H 2 O Overall reaction:
Chemsheets AS006 (Electron arrangement)
Author: J R Reid Electrochemical Cells – Voltage (Electric potential) The half cells Standard electrode potentials Calculating voltages Examples.
Chapter 21: Electrochemistry
Electrochemistry III. QUESTION Meals Ready to Eat (MREs) were developed during the Vietnam War. They need hot water to be reconstituted. The military.
Sources of electrical energy. The driving force in electronic circuits In Chapter 6, the idea of electromotive force was explained. The electromotive.
BATTERIES SPECIFICATIONS. Batteries Batteries are electrochemical cells. A chemical reaction inside the battery produces a voltage between two terminals.
Apr 24Ch 7 Apr 26Ch 8Letter due May 1Ch 8 May 3Ch 8Q 10, HW 9 May 8Ch 8? May 10Exam 3 (Ch 5, 7, 8)HW 10 May 15Review and Wrap-up.
ELECTRICAL ENGINEERING SCIENCE
The Chemistry of Common Cells Outcome 9: Understand electrochemical cells as a source of energy, including the constituents of commercial cells.
Cells and Batteries Chapter 27. Portable Power A mobile phone, a laptop, an MP3 player and a hearing aid all depend on small portable sources of electricity:
Fuel Cells and Rechargeable Batteries C5. C.5.1 Describe how a hydrogen oxygen fuel cell works. Alkaline fuel cells usually use a mobilized or immobilized.
Cells and Batteries.
6A Luk Pui Lam (7). Lead-acid accumulator Lithium battery charged A secondary cell is any kind of electrolytic cell in which the electrochemical reaction.
PH0101 UNIT-5 LECTURE 7 Introduction Types of battery Lithium battery
BATTERIES.
Batteries and Fuel Cells
Batteries Specifications Estimating when they will be fully discharged.
Batteries Storing Renewable Energy “Chemical engines used to push electrons around”
Fuel Cells & Rechargeable Batteries By Anisha Kesarwani 2013.
P1a topic 9 Electrical energy. Learning objectives There is a variety of ways we can produce electricity. Electrical quantities can be measured. Keywords:
20-2 Batteries A battery is a group of cells in a series...the total charge is the sum of the charges of the cells. D,C,AA, AAA and other similar products.
Read Sections 8.3, and 8.4 before viewing the slide show.
Electrochemistry is the chemistry of reactions which involve electron transfer. In spontaneous reactions electrons are released with energy which can.
Fuel Cells. Topic and Area of Science Topic: Creating Energy From Fuel Cells Areas of Science: Chemistry, Physics, Engineering What is a fuel cell? A.
The alkaline cathode is a mixture of manganese dioxide, graphite and an electrolyte. The mixture is granulated, aged, and then compacted into a pressed.
Chapter 27 – Cells and Batteries
Chapter 8: Energy from Electron Transfer
Oxidation and Reduction
Rechargeable Batteries By: Tolaz Hewa. Chemistry behind Batteries O A battery is a package that consist of one or more galvanic cells used for the production.
Voltaic Cells Batteries, etc.. Essentials Electrochemical setups that can generate electricity They release energy and are spontaneous E cell is positive.
Batteries By: Group H 2 0 Names of Team Members. Oxidation and Reduction Produces the electricity in batteries Involves the loss (oxidation) and gain.
ELECTRIC CURRENT. What is current electricity? Current Electricity - Flow of electrons What causes electrons to flow? When an electric force is applied,
Batteries There are 3 main types of battery: Primary cell: use once and then discard. Leclanche cells Alkaline cells Lithium batteries Secondary cell:
2.10 Producing electrical energies: batteries 27 November, 2015.
Understandings: Cells Internal resistance Secondary cells Terminal potential difference Electromotive force (emf) Unit 2 Ohm’s Law and Electric Cells.
Redox Reactions in Batteries Chem 253 November 11, 2013.
Rebecca Ghobrial and Margaret Smith RISKS & ETHICAL ISSUES POSSIBLE NEW ANODES SUSTAINABILITY SOLUTIONS TO RISKS As depicted in the figure, in order for.
SEC 598 – PV SYSTEMS ENGINEERING Project -1 A Brief Study on Lithium-Ion Battery Technology For Large Scale Residential Systems - GOVINDARAJASEKHAR SINGU.
Topic 10 Making Electricity. Aim: To learn more about the batteries we use everyday.
Batteries  Connects objects  Converts chemical---electrical energy  Two or more voltaic cells connected to each other.
What exactly are batteries?. Batteries  Connects objects  Converts chemical---electrical energy  Two or more voltaic cells connected to each other.
Chem. 1B – 11/10 Lecture. Announcements Mastering Chemistry –Chapter 18 Assignment is due 11/17 Today’s Lecture – Electrochemistry (Ch. 18) –More Nernst.
Batteries for HTM © D. J. McMahon 2014 rev
SCI3023 ELECTROCHEMISTRY Chapter 6b : Battery - Electrochemical Ce ll.
Chapter 20: Electrochemistry. © 2009, Prentice-Hall, Inc. Electrochemical Reactions In electrochemical reactions, electrons are transferred from one species.
Materials: wire, batteries, bulbs, and switch. Procedure:
Engineering Chemistry CHM 406
Chapter 27 – Cells and Batteries
Chemsheets AS006 (Electron arrangement)
Chemsheets AS006 (Electron arrangement)
Show Video:
What are batteries? How do they work?.
Cells & Batteries.
Chemsheets AS006 (Electron arrangement)
Storage cells and fuel cells
Presentation transcript:

Introduction Ease of Availability Testing Conclusions References Acknowledgments Battery Power Comparison to Charge Medical Devices in Developing Countries Alesia M. Casanova 1, Andrew S. Bray 1, Taylor A. Powers 2, Amit J. Nimunkar 2 1 Electrical Engineering Department, 2 Biomedical Engineering Department, University of Wisconsin-Madison, Madison, WI, , USA Most medical devices require electricity, and therefore, draw on a constant power supply or use a battery that needs to be charged. Generally, the power requirement for most medical devices is not huge. For example, devices such as pulse oximeters, spirometers, and temperature sensors could be powered with 3.3 V and less than 500 mA [1]. Our goal is to determine whether such devices and others can function if they are charged using either a lead- acid car battery, a lithium-ion battery from a cell phone, or a standard 9 V alkaline battery. Currently, there are many ways that people in developing countries charge medical devices. Of these ways, some of the most common include electricity from solar energy and power grid electricity generated from fossil fuel plants, and dams. Although many developing countries have an abundant source of sunlight throughout most of the year, harnessing solar energy is very expensive. At their current state in economic development, these nations cannot afford to become completely dependent on solar energy [2]. In order to determine whether lead-acid batteries would be one of the most convenient and reasonable methods of charging devices such as pulse oximeters, temperature sensors, spirometers, and electrocardiograph machines, we must consider all of the advantages and disadvantages. Lead-acid batteries are widely available to rural, underdeveloped, and developing regions. Many of these batteries can be attained at low costs because they already exist in and can be recharged in vehicles. They provide enough power to run the medical devices for multiple hours. There remains minimal potential for lead exposure or electrical burn when working with these batteries. However, they may require a voltage regulation system. Lastly, all rechargeable batteries have a finite lifespan, and eventually the battery would fail. Amid these disadvantages, lead-acid car batteries and lithium-ion batteries still have great potential for charging low voltage medical devices in developing countries. The authors gratefully acknowledge the support of Professor John G. Webster and Jonathan Baran. [1] Product Range. Medical Point. [online] Available: [2] (2008, June 12). Cutting the costs of solar power. Think Solar Energy [online] Available: of-solar-power/ [3] T. Kotz, Chemistry and Chemical Reactivity, Belmont, CA: Thomas Brooks/Cole, ch. 20 [4] M. Brain and C. W. Bryant. (2000, April 1). How batteries work. Howstuffworks. [online] Available: [5] E. W. Weisstein. (2007). Lead Storage Battery. Wolfram. [online] Available: ageBattery.html [6] M. Brain. (2006, November 14). How lithium-ion batteries work. Howstuffworks. [online] Available: battery.htm [7] D. Hagopian. (2008, August 31). How many times can I charge my battery? Battery Education [online] Available: many-times.html [8] (2006, October 18) How many cars are in the world. I did not know that yesterday! [online] Available: 0/how-many-cars-are-in-world.html Fig. 1. This is a voltage (V) versus Time (s) graph of a 3.7 volt lithium-ion cell phone battery. This test used an 18 Ω resistor. Fig. 3. This is a voltage (V) versus Time (s) graph of a lead-acid car battery manufactured by EverStart. This test used an overall resistance of 3.4 Ω. Standard 9 Volt Alkaline Battery Voltage: 9 V; Amp-hours: A∙h R = 9 V/ A = 324  rated for 0.25 W Hours =.565 A∙h /.0278 A = 20.3 h Lead-acid Car Battery Voltage: 12 V; Amp-hours: 360 A∙h R = 12 V/3.53 A = 3.4  rated for 90 W Hours = 360 A∙h /3.53 A = h = 4.3 days Lithium-ion Battery Voltage: 3.7 V; Amp-hours: A∙h R= 3.7 V/.26 A = Ω rated for 0.96 W Hours =.780 A∙h/.26 A = 3 h We performed experiments to demonstrate how a lead-acid, 9 V alkaline, and lithium-ion battery behave when supplying a constant resistance load. This will help us determine the feasibility of using these batteries and others for powering medical devices. We expect the graphs of voltage versus time to show a relatively constant voltage, and then, at some point in time, experience a fairly dramatic voltage drop ending with a voltage close to zero. A car battery is a type of lead acid battery. Net ionic equation: Pb (s) + 2SO 4 –2 (aq) + 4H + (aq) → 2PbSO 4 + 2H 2 OE° = V [5] These oxidation-reduction reactions are completely reversible, and therefore, allow the batteries to be recharged many times [4]. Lithium-ion batteries use a graphite anode where the cathode can vary from lithium cobalt oxide, lithium iron phosphate, or lithium manganese dioxide. These are submersed into an organic solvent, commonly ether, which acts as an electrolyte [6]. One reaction using the lithium cobalt oxide can be written as follows: Net ionic equation: Li (s) + CoO 2(s) → LiCoO 2 E° ≈ 2.5 V [3] Charge battery to a full state of charge. 1) Connect voltmeter to the appropriate battery terminals. In our experiment, we ran a LabVIEW program that measured the voltage over time. 2) Connect the appropriate load resistor as determined by the ampere-hours. 3) Take voltage readings manually or with a computer program as a function of time. 4) Disconnect the resistor and stop the program when the battery has been discharged to a low voltage. Fig. 2. This is a voltage (V) versus Time (s) graph of a standard 9 V alkaline battery manufactured by Duracell. This test used a 324 Ω carbon film resistor. The voltage of the lithium-ion battery is relatively constant until about s (3.28 h), however the voltage goes below 3.3 V at 7698 s (2.14 h) after which the battery would not be able to power most low-voltage medical equipment. The voltage behavior of the 9 volt alkaline battery in Fig. 2. also behaved as we predicted. The voltage is relatively constant until about s (23.26 h). The voltage goes below 3.3 V at s (24.04 h). If a medical device had a resistance of 324  and required 3.3 V, it could function from a 9 V alkaline battery for h provided it has some sort of voltage regulation system. Medical devices such as electrocardiograph machines would require at least 3 times more power than the device that was just described [1], therefore 9 V alkaline and lithium ion batteries would only be able to support very low power medical devices. The lead-acid battery did not seem to have the same ability to maintain an approximately constant voltage near its voltage rating. This could be the effect of several different factors including battery state of health, battery temperature, or the chemical properties of lead- acid batteries. However, the fact that the lead-acid battery did not maintain a voltage near its initial voltage for long does not mean it would be a bad power source for medical devices. The voltage drops below 3.3 at seconds (2.94 h). If a medical device had a 3.4  resistance and required at least 3.3 V, it could function off a lead-acid battery for 2.94 h provided it had some sort of voltage regulator. In this case, the lead-acid battery can supply enough power to run medical devices that had a resistance of 3.4  for almost 3 h. With devices that require less power, it could power them for longer depending on their required voltage and resistance. With this test, we conclude that lead-acid car batteries are a reasonable power source for low-voltage medical devices; lithium ion and 9 V batteries are a reasonable source for low-voltage and low- power devices. Calculations Further Testing Further research includes developing and testing voltage regulating systems to provide a safe and efficient interface between the medical devices and the batteries. The availability of the batteries is a key factor in determining how reliable they are for powering medical devices, and therefore, to what extent they will be used for such purposes. Lead-acid, lithium-ion, and 9 V alkaline batteries are commonly found in cars, cell phones, and other common devices, respectively. A lithium-ion battery can be recharged between 300 and 500 times before it dies. There are roughly 500 million lithium-ion batteries currently being used in the world inside laptop computers and cell phones [7]. Car batteries are very abundant as well. There are approximately 625 million cars in the world today. Most are in developed nations, but cars are still very prevalent throughout the developing world. This means lead-acid car batteries are abundant in developing countries [8]. In comparison, standard 9 V alkaline batteries are very common as they are used in everyday items, such as in cameras, flashlights, and toys [3]. Chemistry A standard 9 V alkaline batteries, although not rechargeable, provide a good comparison for lead-acid and lithium-ion batteries. Net ionic equation: Zn (s) + 2MnO 2(s) → Mn 2 O 3(s) + ZnO (s) E°=1.54 V [5] Procedure Results