1 Module 1 Requirements for Flaggers This training is provided under Susan B. Harwood No. SH-21004-10-60-F-8. It does not necessarily reflect the views.

Slides:

Advertisements

Similar presentations

Roles and Responsibilities. A good ITCP program may involve a number of key people: Safety Professional Inspectors/Quality Control Superintendent/ Project.

Advertisements

Temporary Traffic Control Elements

Developed by Western Iowa Tech Community College This material was produced under a grant (SH20836SHO) from the Occupational Safety and Health Administration,

Traffic Control Devices Module 4 1 This training is provided under Susan B. Harwood No. SH F-8. It does not necessarily reflect the views or.

“Highway Construction Work Zones and Traffic Control Hazards” A Training Program developed under a Susan Harwood grant from OSHA Prepared by Wayne State.

Safe and Secure Safety Training Series identifying JOB HAZARDS.

Module 2: General Working Conditions 2.2 Working Surfaces Susan Harwood Grant Number SH F-23.

Road Safety & Awareness Training Your “Right to Know” 29 CFR 1926 / DOT MUTCD This material was produced under grant number SH22297-SH1 from OSHA. It does.

Shipbreaking Module 4: Heavy Equipment & Material Movement

OSHA Safety and Health Regulations Related to SPF Applications Module Three: Personal Protective Equipment.

Safety for Workers on Foot. Safe Practices  Consider worker behavior when developing the ITCP. Determine locations where workers are likely to go.

Module 3: PPE 3.4 Cleaning, Maintenance, and Replacement of PPE Susan Harwood Grant Number SH F-23.

Pedestrian and Worker Safety Module 5 1 This training is provided under Susan B. Harwood No. SH F-8. It does not necessarily reflect the views.

The Use of Chemicals in the Workplace NDLON This material was produced under a Susan Harwood Training Grant #SH F-6 from the Occupational Safety.

Logistics Safety Awareness This material was produced under grant number #SH F12 from OSHA. It does not necessarily reflect the views or policies.

Fall Protection Training (OSHA Program) 1 Introduction to OSHA This material was produced under grant number SH F-51 from the Occupational.

SHIPBREAKING Module 1: Introduction to Shipbreaking 1.3 Emergency Action Plans Susan Harwood Grant Number SH F-23.

Hazard Communication Training Your “Right to Know” 29 CFR This material was produced under grant number 46D6-HT31 from OSHA. It does not necessarily.

1 Intro to OSHA. Susan Harwood Training Grant This material was produced under grant number SH SH0 from the Occupational Safety and Health Administration,

Module 2: General Working Conditions 2.3 Ladders / Stairways Susan Harwood Grant Number SH F-23.

This material was developed by Compacion Foundation Inc and The Hispanic Contractors Association de Tejas under Susan Harwood Grant Number SH SH0.

Module 2: General Working Conditions 2.5 Confined Space Entry Susan Harwood Grant Number SH F-23.

Offered by Worker Justice Center of NY Through OSHA Susan Harwood Capacity Building Training Grant Eye Health & Safety This material was produced under.

Safety Training Presentations

Preventing Runovers and Backovers

Module 3: PPE 3.3 Training Susan Harwood Grant Number SH F-23.

Susan Harwood Program Grant – The University of Texas at Arlington Thanks to the Susan Harwood Program Grant.

Module 3 Flagger Stations

Module 3: PPE 3.2 PPE Selection Susan Harwood Grant Number SH F-23.

Safety Training Presentations

Module 6: Workplace & Chemical Hazards 6.4 PCB Susan Harwood Grant Number SH F-23 Shipbreaking.

ERGONOMICS BASICS FOR EMPLOYERS This material was produced under grant numbers SH F-17 from the Occupational Safety and Health administration,

OSHA Safety and Health Regulations Related to SPF Applications

Remaining Course Material 1.Overview of Process Safety 2.Compliance with standards 3.Process Hazard Analysis 4.Standard Operating Procedures 5.Safe work.

Module 3: PPE 3.1 Hazard Assessment Susan Harwood Grant Number SH F-23.

1 WELCOME TO Electrical Safety Arc Flash/Blast Injury Prevention Management/Supervisory Course.

1 Crane Safety on Construction Sites Supervision and Management of Crane Operations Rigging Operations Presented by the Construction Institute of ASCE.

This material was produced under grant number SH F-51 from the Occupational Safety and Health Administration, U.S. Department of Labor. It.

Module 5: Fire Protection 5.1 Fire Response Susan Harwood Grant Number SH F-23.

Flagger Control Module 6 1 This training is provided under Susan B. Harwood No. SH F-8. It does not necessarily reflect the views or policies.

DOWN TO ZERODOWN TO ZERO Down To Zero ̶ Eliminate Falls/Save Lives State Building & Construction Trades Council of California, AFL-CIO Funded by Federal.

Module 1.  Objectives - Provide information about worker rights under OSHA law - Learn how to file a complaint, and rights against discrimination and.

1 Landscaping and Horticulture Safety Introduction to OSHA This material was produced under grant number SH F-54 from the Occupational Safety.

1 Hispanic Contractors Association de San Antonio Fall Protection in the Construction Industry Fall Protection for the Construction Industry Train the.

Introduction to the Course MODULE 1. 2©2006 TEEX Course goal  Upon the successful completion of this course, participants will be able to identify the.

1 Health Hazards. This material was produced under grant number SH F-54 from the Occupational Safety and Health Administration, U.S. Department.

Principles of “Internal Traffic Control” for Roadway Construction Module 2.

Campus Hazards This material was produced under grant number SH F-11 from the Occupational Safety and Health Administration, U.S. Department.

11 Walking-Working Surfaces Avoiding Slips, Trips and Falls Material is OSHA Compliant, Reviewed and Approved This material was produced under grant SH F-6.

Walking and Working Surfaces

Safety for Workers on Foot Module 3. Safe Practices.

Big Four Construction Hazards: Struck-by Hazards This material was produced under grant number 46F5-HT03 and modify under grants numbers SH F-72.

Developed by: Purdue University Agricultural Safety and Health Program Department of Agricultural and Biological Engineering West Lafayette, IN This material.

1 Hand and Power Tools. This material was produced under grant number SH F-54 from the Occupational Safety and Health Administration, U.S.

Combustible Dust Preventing and Mitigating the Effects of Fire and Explosions Developed by Western Iowa Tech Community College This material was produced.

Productivity. PLANNING  The key concept behind Internal Traffic Control is PLANNING for worker safety.  ITCPs integrate other aspects of planning to.

Module 5: Fire Protection

SHIPBREAKING Module 1: Introduction to Shipbreaking 1.4 Gangways and Signs Susan Harwood Grant Number SH F-23.

Down To Zero ̶ Eliminate Falls/Save Lives

Module 5: Operations & Hot Work 5.3 Hot Work, Permits, and Inspections Susan Harwood Grant Number SH F-23.

1 Module 2 Hand-Signaling Devices and Procedures This training is provided under Susan B. Harwood No. SH F-8. It does not necessarily reflect.

OSHA NOTICE & DISCLAIMER “This material was produced under grant SH20866SH0 from the Occupational Safety and Health Administration, U.S. Department of.

2. Compliance with Standards Process Safety Management for Biodiesel This material was produced under grant SH F-36 from the Occupational Safety.

Non-Ferrous Founders’ Society Safety & Health Training Program Hazard Communication/GHS Training Program The Hazard Communication Standard and the Non-Ferrous.

Non-Ferrous Founders’ Society Safety & Health Training Program Hazard Communication/GHS Training Program Labels © 2015 All Rights Reserved.

Welcome to Your 30-Second Mental Health Training

Welcome to Your 30-Second Mental Health Training

Shipyard Machinery and Power Tool Safety

Job Seeker Career Path Planner Advanced degree College Degree

Presentation transcript:

1 Module 1 Requirements for Flaggers This training is provided under Susan B. Harwood No. SH F-8. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

2 Flagger Qualifications Abilities –Communicate –Move and maneuver –Control signaling devices –Understand TTC practices –Recognize dangerous situations, warn workers

3 Activity: Flagger Requirements

4

5

6

7 Flagger PPE High visibility safety apparel Hard hat Safety eyewear Steel-toed boots

8 Activity: Safety Vest Inspection Examine and evaluate safety vests that are provided to you.