OPERA AUDIO NEW ANALOG PRODUCTS 2007. ■ A multi-pivot static balance system ■ 230mm (9″) effective length ■ 16mm overhang & 23.5°offset ■ Stainless.

Slides:

Advertisements

Similar presentations

Table surface is called the playfield. The playing area is rectangular 2.74 m long, widespread m and must be level of 76 cm above the floor. The.

Advertisements

Suspension Systems - 1 Topics covered in this presentation:

Basic Rotor Maintenance

Module Assembly Update Ohio State University and Princeton University are presently preparing facilities for module assembly. Both universities are fabricating.

1 Tree service 1 The Tree Service Solution Epsilon’s superior engineering delivers the most effective combination of power, performance, speed, and quality.

Proper Care and Setting of ULTRA-MILL  Cutters. January 25, Introduction ULTRA-MILL  ULTRA-MILL  ULTRA-MILL  cartridges with diamond tips are.

By Bryce. Wheels TThe wheels of a skateboard, usually made of polyurethane, polyurethane come in many different sizes and shapes to suit different types.

1 Working with the Workshop Andy Edgar. If you can buy it from a catalogue, buy it, don’t build it. 2 US $400.

1 UBC International Training Fund Presents. Tensioning.

Professor Joe Greene CSU, CHICO

Materials Feasibility for Laser Processing CO2 Laser(10.6 µm): Materials Feasibility 1. Organic Materials: Polymers (Plastics), Wood Based Products 2.

You will be making a few new parts and re- drilling a few holes to size. READ ON,,,,, 3/8” bolt Brass bushingNylon bushing 2 reinforcement plates 2 Delrin.

 Brinkmann Audio, started in 1984, is Helmut Brinkmann’s never-ending search for the “perfect illusion”  Designs are not “cost-optimized,” they are.

Lesson No 05 Week No. 05 Lesson Name Vice.

CUP JEWELS Cup jewels are chiefly applied to electronic meter, hot water meter, liquid measuring instrument and movement system of single-phase and triphase.

Harvard PCM (Plate Cleaning Machine) Robert J. Simcoe (Bob) Ed Los Jonathan Grindlay.

TOUGHENED GLASS FIBER REINFORCED BODY TOUGHENED GLASS FIBER REINFORCED BODY ONE PIECE BODY FOR OPTIMUM INTEGRITY ONE PIECE BODY FOR OPTIMUM INTEGRITY STANDARD.

Function, Construction and Operation

Statics. Static Equilibrium  There are three conditions for static equilibrium. 1.The object is at rest 2.There is no net force 3.There is no net torque.

New Hexagonal Design for MINERvA A. Bodek- Sept Now even counters have a 1.2 solid steel picture frame Around the 3 m wide active target. The.

Pre-alignment solutions applied to girders 1/19 Sylvain GRIFFET, 06/07/2010.

SEALS Seals protect critical components by excluding contaminants or by retaining fluids inside the housing of a machine Seals are an important part of.

1 RF-Structures Mock-Up FEA Assembly Tooling V. Soldatov, F. Rossi, R. Raatikainen

Classification of Lathe

Prepared by Mahmoud F. Elbatta Ahmad Alyazgi Amjad Alaskary Akram abo Twahina Roshdi tambora.

Lesson No. 11 Week No. 07 Name of lesson Marking Tools

26 April 2013 Immanuel Gfall (HEPHY Vienna) Belle II SVD Overview.

A PRESENTATION on “ SUSPENSION SYSTEM ”

Radial Ball Bearing Product Overview

Product Presentation. Product Range  Linear Flourescent Tube Lighting Fixtures  Flood Lighting Fixtures  Round Fixtures Series.

Hall D Integration Status GlueX Collaboration Meeting Indiana University, Ravi Anumagalla.

Last class - MAR transformation Austenitization & tempering Stainless steels Last class - MAR transformation Austenitization & tempering Stainless steels.

Tracking Calorimetery Particle Identification WBS DETECTORS.

TOPIC D: BONDING AND THE PROPERTIES OF SOLIDS. An alloy is a mixture of metals. Two types are common: 1. An interstitial alloy – additional, smaller atoms.

2 October 17 th, AACHEN. Double Chooz collaboration meeting. CIEMAT.

BANDSAWS CUTTING CAPABILITIES 1. Shearing is a metal fabricating process used to cut straight lines on flat metal stock. During the shearing process,

Ionizer IZS31 Series. 1. Features (1) Following functions are added to the current IZS30 on sale. Detects the dirt on the electrode needle. Detects the.

MCQ. 1. An element is an a. Rigid body b. Resistance body c. Free body d. Strong body.

Linear ball bearings – L Line :  Bore diameter from Ø 0.078in to Ø 0.236in (Ø 2 mm to Ø 6 mm)  The smallest linear ball bearing available on the market!

MANUFACTURING SCIENCE - II

BRUKS 1006 Chipper.

EBB440 Applied Metallurgy Abrasive Machining.

How tyres are made. Made by jack and Magnus. How tyres are made The first stage of tire making is collecting raw materials and form the rubber compounds.

Materials: Structure and Uses

Analog in a digital world The vinyl experience. Beginner or advanced? Automatic vs. manual adjustment While automatic turntables can be easy to use, they.

VARITECH INTERNATIONAL

LCWS11 WG4 Fully featured accelerating structure engineering design

Suspension Systems - 1 Topics covered in this presentation:

GSI, for the CBM Collaboration

Progress with System Integration of the CBM Silicon Tracking Detector

Easy centering and setting system

Abrasive Grinding See page 539 in text

BEARING MATERIALS.

Global Experience…Local Solutions

SHEET METALWORKING Cutting Operations

Watch «HOW IT’S MADE» (youtube)!!!

Impact Brass Public Area Crowd Control. Retractable Belt Posts Impact Brass retractable belt system and crowd control products can be customized. Our.

Stainless Steel Water Well Casing.

Last class - Improving hardenability - shift TTT curves to right

Manufacturing lesson 3 Materials

Rose Ball Room Diamond Package

Covalent Properties Main Concept:

Spring Test Press NST.

Material: Designing for Properties

Conductors & Insulators

Electricity 2 types of electricity

Suspension Systems - 1 Topics covered in this presentation:

Metal-grinding. Grinding is one of the material removal processes by making relative motion in between work piece and abrasive surface Horizontal-spindle.

Presentation transcript:

OPERA AUDIO NEW ANALOG PRODUCTS 2007

■ A multi-pivot static balance system ■ 230mm (9″) effective length ■ 16mm overhang & 23.5°offset ■ Stainless steel arm base & carbon fiber arm tube

■ 230mm (9″) effective length ■ 16mm overhang & 23.5°offset ■ A multi-pivot static balance system ■ Stainless steel arm base & carbon fiber arm tube

12mm V.T.A. adjustable while listening High precision lateral arm bearing and vertical arm bearing

■ 267/300mm (10.5″/ 12″) effective length ■ 15-16mm overhang & 20°offset 10.5″ 12″ ■ An oil damping unipivot static balance system ■ Stainless steel arm base & carbon fiber arm tube

20mm V.T.A. adjustable while listening High precision synthetic diamond upper pivot and high rigidly industrial ceramic mat Silicone damping oil

■ mm (10.5″-12″) effective length ■ 15-16mm overhang & 20°offset 10.5″ 12″ ■ An oil damping unipivot static balance system ■ Stainless steel arm base & carbon fiber arm tube

ST600 got similar bearing and pivot system with ST500 to change the length of arm tube from 10.5’’ to 12’’ Loose / tighten the 2 fixing screws

Solid machined black acrylic platter Stainless steel label Matching ST100 tonearm design Droplet style acrylic plinth

Double layers graphite spindle holder working as a sandwich hard damping system This graphite sandwich hard damping system has also been applied to ST tonearms spindle fixing Stainless steel spindle and brass spindle bushing High rigidly industrial ceramic ball and mat

Equipped dust cover for platter and tonearm Mirror label for convenient adjustment of cartridge Using the same spindle and graphite sandwich hard damping system as Droplet LP3.3 Forbidden City style sandwich plinth design Double layers graphite arm holder working as sandwich hard damping system

THANK YOU