KIT – University of the State of Baden-Wuerttemberg and National Research Center of the Helmholtz Association M.H.H. Kolb, R. Knitter INSTITUTE FOR APPLIED.

Slides:

Advertisements

Similar presentations

Q- Sulfuric acid can be produced from mined sulfur via the contact process. There are two stages represented below Molten Sulfur I Burner II Burner.

Advertisements

Mohammad Irfan, David Schwam (CWRU) Andy Karve, Randy Ryder (Neemak) Mike Cox, John Kubisch (GM) February, 2009.

Hongjie Zhang Purge gas flow impact on tritium permeation Integrated simulation on tritium permeation in the solid breeder unit FNST, August 18-20, 2009.

16th International Workshop on CERAMIC BREEDER BLANKET INTERACTIONS, 8-10 September, 2011 Portland, Oregon, USA. Status of research and development of.

Ti and its Alloys & their Heat Treatments Presented by Professor Ali H. ATAIWI 1.

KIT – University of the State of Baden-Wuerttemberg and National Research Center of the Helmholtz Association Institute for Applied Materials (IAM-WBM)

HYDROGEN INTERACTION WITH NICKEL CONTAINING RADIOGENIC HELIUM.

CBBI-16, Portland, 8-10, September Fabrication and performance of Li 4 SiO 4 pebbles by the melt spraying method Yongjin Feng Southwestern Institute of.

30 th ISTC Japan Workshop on Advanced Catalysis Technologies in Russia Fluidized bed catalytic pyrolysis and gasification of biomass for production of.

Zürich, Acceptable limits of degradation of TBC for high-efficient turbines (HET TBC) Department Materials (ALSTOM) Lab of Crystallography (ETH.

Member of the Helmholtz Association Takeshi Hirai | Institute of Energy Research | Association EURATOM – FZJ Cracking of a tungsten material exposed to.

The Effect of Pressure on the Microstructure and Mechanical Properties of Spark Plasma Sintered Silicon Nitride Anne Ellis, Leah Herlihy, William Pinc,

Nanostructured Metallic Materials Processing and Mechanical Properties Sung Whang.

The American University in Cairo Mechanical Engineering Department MENG 426: Metals, Alloys & Composites Interactive MENG 426 Lab Tutorials Experiment.

Types of Ferroelectric Materials

Powder Production through Atomization & Chemical Reactions N. Ashgriz Centre for Advanced Coating Technologies Department of Mechanical & Industrial Engineering.

CHAPTER 5 Ferrous Metals and Alloys: Production,

Complete Calculation of Steel Microstructure for Strong Alloys J. Chen, H. K. D. H. Bhadeshia, University of Cambridge S. Hasler, H. Roelofs, U. Ulrau,

Processing and Characterization of Piezoelectric Materials into MicroElectroMechanical Systems Weiqiang Wang.

1 Influence of solid phases on BOF slag viscosity 1 Zhuangzhuang Liu, Bart Blanpain, Muxing Guo Department of Materials Engineering KU Leuven, Belgium.

PACCON 2013 PREDICTION OF NITROGEN OXIDE GENERATED FROM GAS TURBINE ENGINE Global Chemical Sciences for Green Community NATCHANON CHAIPRASERT / AMORNCHAI.

Introduction to Materials Science, Chapter 9, Phase Diagrams University of Virginia, Dept. of Materials Science and Engineering 1 Development of microstructure.

Summary of FS Lifetime Assessment and Activation Analysis L. El-Guebaly Fusion Technology Institute University of Wisconsin - Madison ARIES E-Meeting October.

STRUCTURAL & NOZZLE MATERIALS ASSESSMENT M.C. Billone (ANL) ARIES EVALUATION OF HYLIFE-II DESIGN October 10, 2002.

THE EFFECT OF HEAT TREATMENT ON THE PROPERTIES OF ZIRCONIUM - CARBON STEEL BIMETAL PRODUCED BY EXPLOSION WELDING Mariusz Prażmowski 1), Henryk Paul 2),

Marvin Chan, SURF IT Fellow Jesse Angle, Graduate Student Mentor Professor Mecartney, Faculty Mentor.

Thermal Processing of Metal Alloys

Wittaya Julklang, Boris Golman School of Chemical Engineering Suranaree University of Technology STUDY OF HEAT AND MASS TRANSFER DURING FALLING RATE PERIOD.

1 Recent Progress in Helium-Cooled Ceramic Breeder (HCCB) Blanket Module R&D and Design Analysis Ying, Alice With contributions from M. Narula, H. Zhang,

Model of PEM Fuel Cell Cathode Sarah Hipple EGEE 520 May 3, 2007.

Microstructure Evolution of Semi-solid Magnesium Alloy AZ91D Under Electric Current Y Yang, Q Zhou, J Tang, Z Hu Institute of Metal Research Chinese Academy.

Synthesis Rutile titania nanofibers are synthesized using electrospinning and sol-gel coating techniques. A large sheet of nylon-6 nanofibers are synthesized.

1. Chapter 09: Phase Diagram 2 Introduction Phase Diagrams are road maps.

Introduction to Materials Science, Chapter 9, Phase Diagrams University of Virginia, Dept. of Materials Science and Engineering 1 Growth of Solid Equilibrium.

KIT – University of the State of Baden-Württemberg and National Large-scale Research Center of the Helmholtz Association Institute for Nuclear and Energy.

Refractories Definition & Classification Tina Stendal Svendsen Product Manager 1.

FATIGUE CRACK PROPAGATION BEHAVIOR OF NEWLY DEVELOPED ALLVAC ® 718PLUS ™ SUPERALLOY Xingbo Liu 1, Shalini Rangarajan 1, Ever Barbero 1, Keh-Minn Chang.

Microstructure and Phase Transformations in Multicomponent Systems

In-situ fabrication of functionally graded Al/Mg 2 Si by electromagnetic separation Li Jianguo School of Materials Science and Engineering,

Synthesis of Barium Titanate Nanoclusters Presented by Marc Landeweer Advisor: Prof. Slamovich.

ZIRCONIUM DIBORIDE SHOCK SYNTHESIS V. N. Leitsin, M.A. Dmitrieva, I.V. Kobral.

Growth Control of Li 2+x TiO 3+y for an Advanced Tritium Breeding Material The University of Tokyo School of Engineering, Department of Nuclear Engineering.

Production, Processing and Characterization of oxide dispersion strengthened W alloys for Fusion Reactors J. Martinez 1, A. Muñoz 1, M. A. Monge 1, B.

Tritium Breeders Li 2 OLi 2 AlO 2 Li 2 ZrO 3 Li 4 SiO 4 Li 2 TiO 3 Li Vaporization ( in additional H 2 ) > 600˚C> 900˚C> 800˚C> 700˚C> 800˚C Long period.

Current Status of Lithium Ceramic Pebble Manufacturing in Korea Yi-Hyun Park 1, In-Keun Yu 1, Mu-Young Ahn 1, Seungyon Cho 1, Duck Young Ku 1, and Sang-Jin.

Microstructure and properties of the new Pt-Rh based alloys for high temperature applications Zbigniew M. Rdzawski and Jerzy P. Stobrawa The Non-Ferrous.

Introduction to Materials Science, Chapter 7, Dislocations and strengthening mechanisms University of Virginia, Dept. of Materials Science and Engineering.

Laser Treated Metallic Probes for Cancer Treatment in MRI Systems July 08, Advance Materials Processing and Analysis Center (AMPAC) Department of.

Che5700 陶瓷粉末處理 Powder Synthesis Solid state method:  Solid-solid reaction; decomposition of solid; oxidation or reduction of solid Liquid phase method:

Current status on lithium ceramic breeder development in India Paritosh Chaudhuri Institute for Plasma Research Gandhinagar, INDIA CBBI-16, Sept.

Silicon Pure aluminium melts at 660.4° C it is not suitable for casting and is only used for electrical applications (where high conductivity is essential),

Study on the phase change cement based materials Min Li Southeast University, China Southeast University th International Conference on.

Electro-Ceramics Lab. Electrical Properties of SrBi 2 Ta 2 O 9 Thin Films Prepared by r.f. magnetron sputtering Electro-ceramics laboratory Department.

FORMING (Conformado) Geometry, microstructure and materials FORMING vs. CASTINGS?: Even when modern castings can possses good structural integrity and.

2015 International Perforating Symposium Europe 2015 International Perforating Symposium Europe 1 PENETRATION OF HIGH DENSITY TUNGSTEN BASE POROUS JETS.

ISSUES TO ADDRESS... Transforming one phase into another takes time. How does the rate of transformation depend on time and T? 1 How can we slow down the.

Kaunas University of Technology Department of Mechanical Engineering and Design T450M105 HIGH TEMPERATURE MATERIALS INTERMETALLICS Professor Submitted.

課程:高等物理冶金課堂教師:戴子堯副教授報告者:蔡中銘

Neda HASHEMI Gaëtan GILLES Rúben António TOMÉ JARDIN Hoang Hoang Son TRAN Raoul CARRUS Anne Marie HABRAKEN 2D Thermal model of powder injection laser cladding.

THE ROLE OF WATER PRESENT IN THE BATCH ON THE FINING OF LEAD CRYSTAL WITH PbO CONTENT ABOVE 24 WT% M. RADA, J. VRŠOVSKÝ Institute of Chemical Technology.

PHASE DIAGRAMS ISSUES TO ADDRESS... • When we combine two elements...

New High Zirconia fused cast material for high quality glass without low temperature oxygen blistering ICF Technical meeting, Sienna November 05th , 2007.

HEAT TREATMENT Improves properties of materials as it modifies the microstructure. Service performance of gears, cams, shafts, tools, dies and molds.

16th International Workshop on

Synthesis Results Future Work Conclusions

Posibilities of strength-enhancing

A new approach to strengthen grain boundaries for creep

XI Conference on Reactor Materials May , 2019, Dimitrovgrad

B. RISCOB et al., Institute for Plasma Research

Presentation transcript:

KIT – University of the State of Baden-Wuerttemberg and National Research Center of the Helmholtz Association M.H.H. Kolb, R. Knitter INSTITUTE FOR APPLIED MATERIALS - MATERIAL PROCESS TECHNOLOGY / DEPARTMENT CERAMICS Enhanced melt-spraying process for tritium breeder pebbles

Institute for Applied Materials (IAM-WPT) 2 Outline Introduction to pebble fabrication by melt spraying Process parameters and microstructure Pebble quality M.H.H. Kolb, R. Knitter - BA Workshop Meeting on Tritium and Blanket Technologies, Sept. 2011

Institute for Applied Materials (IAM-WPT) 3 Standard melt spraying process Established at Schott AG, Mainz Reasonable pebble quality Long time experience Moderate yield Easy and quick reprocessing M.H.H. Kolb, R. Knitter – Workshop on Ceramic Breeder Blanket Interactions, Sept Lithium orthosilicate with 2.5 wt.% excess of silica LiOH & SiO 2 as raw materials Platinum 1450 °C Spraying with an air jet in horizontal direction Initial composition: Li 4 SiO 4 + Li 6 Si 2 O 7 After heat treatment: Li 4 SiO 4 + Li 2 SiO 3 (MSi)

Institute for Applied Materials (IAM-WPT) 4 Development of Process Modifications Modified melt-based process ►controlled droplet generation ►higher yield ►lower porosity ►improved process control M.H.H. Kolb, R. Knitter - BA Workshop Meeting on Tritium and Blanket Technologies, Sept Lithium orthosilicate with 2.5 wt.% excess of silica or other compositions LiOH & SiO 2 as raw materials Platinum °C Self-decay of thin melt jet Gathering of the pebbles in liquid nitrogen Dropping distance can be adjusted Gas pressure to control melt flow velocity

Institute for Applied Materials (IAM-WPT) 5 Development of Process Modifications Nozzle design improvements Coping with impurities Enhancing the melt jet stability Increasing the output Verification of pebble purity Negligible increase of the platinum content Increase of alkali and alkaline elements due to handling M.H.H. Kolb, R. Knitter – Workshop on Ceramic Breeder Blanket Interactions, Sept Element Li (wt.%) Si (wt.%) Pt (µg/g) Element Li (wt.%) Si (wt.%) Pt (µg/g) Reference material Reference material KALOS 22.5    6 KALOS 22.5    6 Relative changes -1 % +2 % +9 % Relative changes -1 % +2 % +9 %

Institute for Applied Materials (IAM-WPT) 6 Pebble size distribution M.H.H. Kolb, R. Knitter – Workshop on Ceramic Breeder Blanket Interactions, Sept The achievable pebbles size distribution is very narrow ► Improvement of the yield

Institute for Applied Materials (IAM-WPT) 7 Effect of the dropping distance M.H.H. Kolb, R. Knitter – Workshop on Ceramic Breeder Blanket Interactions, Sept cm dropping distance1400 cm dropping distance Short dropping distances favor large dendritic grains

Institute for Applied Materials (IAM-WPT) 8 Effect of dropping distance M.H.H. Kolb, R. Knitter – Workshop on Ceramic Breeder Blanket Interactions, Sept cm dropping distance1400 cm dropping distance The dropping distance changes the fraction “shiny”/”opaque” Mean crush load of shiny pebbles: 3.7 N Mean crush load of opaque pebbles: 13.5 N

Institute for Applied Materials (IAM-WPT) 9 Variations in the Chemical Composition M.H.H. Kolb, R. Knitter – Workshop on Ceramic Breeder Blanket Interactions, Sept F. A. Hummel, T. Y. Tien, K. H. Kim, Journal of The American Ceramic Society Vol. 43, No. 4, pp. 192, 1960 Change in the chemical composition Strengthening by additions of TiO 2 Formation of lithium meta- titanate (MTi) as a second or third phase Unknown phase equilibria ►Decrease of melting temperature ►Change in viscosity ►Fine grained dendritic microstructure ?

Institute for Applied Materials (IAM-WPT) 10 Effect of titania on pebble microstructure M.H.H. Kolb, R. Knitter – Workshop on Ceramic Breeder Blanket Interactions, Sept mol% Li 2 TiO 3 15 mol% Li 2 TiO 3 20 mol% Li 2 TiO 3 The grain size is reduced with increasing lithium titanate fraction

Institute for Applied Materials (IAM-WPT) 11 Effect of heat treatment on the microstructure M.H.H. Kolb, R. Knitter – Workshop on Ceramic Breeder Blanket Interactions, Sept As-received1 week at 950 °C3 weeks at 950 °C Grain growth of lithium titanate in lithium orthosilicate is comparably slow 20 mol% MTi

Institute for Applied Materials (IAM-WPT) 12 Element mapping of as-received material Lithium titanate is located at the grain boundaries of lithium orthosilicate SE image SEM Ti mappingSi mapping EDX-Mapping M.H.H. Kolb, R. Knitter - BA Workshop Meeting on Tritium and Blanket Technologies, Sept mol% MTi

Institute for Applied Materials (IAM-WPT) 13 Element mapping of heat treated material Lithium titanate is located at the grain boundaries of lithium orthosilicate SE image SEM Ti mappingSi mapping EDX-Mapping M.H.H. Kolb, R. Knitter - BA Workshop Meeting on Tritium and Blanket Technologies, Sept mol% MTi

Institute for Applied Materials (IAM-WPT) 14 Composition of phases M.H.H. Kolb, R. Knitter – Workshop on Ceramic Breeder Blanket Interactions, Sept Initially LiTiO 2 (Ti +III ) is formed rather than Li 2 TiO 3 (Ti +IV )

Institute for Applied Materials (IAM-WPT) 15 Mechanical strength of 500 µm pebbles M.H.H. Kolb, R. Knitter – Workshop on Ceramic Breeder Blanket Interactions, Sept Increase of crush load due toincrease of dropping height 300 cm (15 mol% MTi) Increase of crush load due to additions of TiO 2

Institute for Applied Materials (IAM-WPT) 16 Summary and Conclusion Modification of Schott process to control droplet generation Low porosity Control of the microstructure Narrow pebble size distribution Addition of titania for strengthening Very little information in the interesting composition range Fine grained dendritic microstructure Very limited grain coarsening of titanate phase Heat treatment necessary to achieve monoclinic Li 2 TiO 3 M.H.H. Kolb, R. Knitter - BA Workshop Meeting on Tritium and Blanket Technologies, Sept. 2011

Institute for Applied Materials (IAM-WPT) 17 M.H.H. Kolb, R. Knitter – Workshop on Ceramic Breeder Blanket Interactions, Sept Thank you for listening