Figure 6 - Hunter Porter and Baylee Tatum working in the environmental chamber Further Investigations of Photovoltaic Cells using Plant Pigments Hunter.

Slides:



Advertisements
Similar presentations
Electric Potential Energy 8.1. A _________ is a combination of electrochemical cells connected together (or a single electrochemical cell). Electrochemical.
Advertisements

Michael Grätzel, YouTube EPFL
Powering the Future: Biofuels. Activity: Algae Chromatography Extract pigment from algae Separate and compare the pigments in red and green algae Analyse.
Describe the processes involved in the extraction and separation of photosynthetic pigments from a leaf extraction  grind leaves in fine sand - to rupture.
Photosynthesis Practical sheets. Photosynthesis Learning objectives: ◦ By the end of the lesson you should be able to:  Describe what the glucose made.
Extracting Chlorophyll Using paper chromatography
Dye Sensitized Nanocrystalline Photovoltaic Cell Group 1 – Luke, Matt, and Jeff.
Dye Sensitised Solar Cells Electricity from berries!
Extraction Lab # 6.
Electrolysis Amy Jewel, Rob Larkin and Todd Haurin “Water will be the coal of the future.” -Jules Verne, 1874.
Project #4: Renewable Energy System: Dyeing to Create Solar Power Introduction Since the industrial revolution, humans have depended primarily on fossil.
Plants utilize the sun energy in a process called photosynthesis. The chloroplasts in the plant leaves harness that light and convert it into chemical.
Transparent conducting oxides (TCOs) are often used in industrial applications. The utility of these semiconductors, as the name suggests, depends upon.
Applications in Forensic Science T. Trimpe 2006
What is Chromatography?
Balance the redox equation: General Procedure
2/12/07184 Lecture 191 PHY 184 Spring 2007 Lecture 19 Title: Kirchoff’s Rules for Circuits.
Resistors and resistance. If a light globe, a cell and a piece of resistance wire are connected together as in the diagram below, the globe can be made.
Identifying Unknown Substances
Energy Capture and Storage Ever consider how much sunlight actually strikes the earth? On average every square yard of land exposed to the sun will receive.
Evidence of Photosynthesis
Photovoltaic Cells. Nanocrystalline Dye Sensitized Solar Cell.
RECRYSTALLIZATION, MELTING POINT, and HPLC ANALYSIS of ANALGESICS
THE CHEMISTRY OF AUTUMN COLORS
What is Chromatography? Chromatography is a technique for separating mixtures into their components in order to analyze, identify, purify, and/or quantify.
Solutions of Electrolytes
Durability of Dragon’s Blood Pigment in Dye-Sensitized Photovoltaic Cells Brett Jones and Jim Bidlack Department of Biology, University of Central Oklahoma,
Chapter 26. An electrochemical cell A device that converts chemical energy into electrical energy. A Daniell cell is a device that could supply a useful.
Evaluation of Solvents used to Extract Chlorophyll for Photovoltaic Cells Chelsie Johnson and Jim Bidlack Department of Biology, University of Central.
Electric Components. Basics 1 Current: electrons moving together in same direction (electrons are always moving in materials like metals but in a random.
Current Electricity. Electricity Electricity is the flow of electrons through a conducting material. Electricity is the flow of electrons through a conducting.
Summary: For the experiment, different nanofluids were tested for their CHF. We sought the maximum CHF for a 0.05% solution of aluminum oxide (Al 2 O 3.
PSAA Curriculum Unit Physical Science Systems. Problem Area Energy and Power Systems.
Use of Chloroplasts and Anthocyanin in Photovoltaic Cells Hunter Porter, Brian Tetreault, and Jim Bidlack Department of Biology, University of Central.
Experimental Procedure. Overview The Product that result from the electrolysis of various salt solutions are observed and identified; these are qualitative.
Investigating Electrolysis Reactions Background When an electric current is passed through a liquid (solution or melt), chemical reactions take place at.
Chapter 26 – Electricity from Chemical Reactions.
Voltaic/Galvanic Cells. Voltaic Cells In spontaneous oxidation-reduction (redox) reactions, electrons are transferred and energy is released.
UNIT 8, PART I - SOLUTIONS AND SOLUBILITY. KEY TERMS  Anion - A negatively charged ion  Aqueous Solution - A solution where water is mixed with something.
Chemical effect of electric current How things work.
DYE SENCITISED SOLAR CELL (DSSC) Lykeio Arhangelou “Apostolos Markos”
Graetzel Solar Cell.
I can relate producers to photosynthesis.
By: Monal Patel. Did you know that blackberry juice can be used to convert light energy into electrical energy? Dye-sensitized solar cells are photovoltaic.
What is photosynthesis?
1 Classification and purification of Organic Compounds.
Within behavioral and economic fields, there are several distinct methods for determining the value of a commodity or reinforcer. Two of these methods.
Sources of images: The left side image is taken from- Tutors4you.com and right image is taken from- bouman.chem.georgetown.com 1 Study of Chemistry behind.
Water Chemistry and its Impact on Life Processes By Mrs.Gilani.
Electric Circuits P5.1 Static electricity P5.2 Current and voltage P5.4 Resistors in parallel P5.4 Resistors in Series P5.5 Measuring resistance Explaining.
___________ Physical Properties ____________ Physical Properties
Applications in Forensic Science
Chromatography.
Photovoltaic and dye-sensitized solar cells
Brett Jones and Jim Bidlack
What is Chromatography?
Cell Processes and Energy
Applications in Forensic Science
What is Chromatography?
Applications in Forensic Science
Applications in Forensic Science
Chromatography.
What is Chromatography?
Applications in Forensic Science
Applications in Forensic Science
Applications in Forensic Science
Applications in Forensic Science
NIKAM N.D. DEPARTMENT OF CHEMISTRY
High Voltage Power Transmission for AP Physics
Applications in Forensic Science
Presentation transcript:

Figure 6 - Hunter Porter and Baylee Tatum working in the environmental chamber Further Investigations of Photovoltaic Cells using Plant Pigments Hunter Porter, Brian Tetreault, Baylee Tatum, and Jim Bidlack University of Central Oklahoma, Edmond, OK Introduction Dye-sensitized solar cells, or Gratzel cells, are a rather recent object of study. These cells are based on a key relationship between a semiconductor and a pigment used to attract light, similar to that of the chloroplast’s structure and the different pigments involved, consisting of one compound drawing light in and the other using the energy to release electrons into a circuit (Grätzel, 2003). The photoreceptive pigment is able to be manipulated in order to improve quality and/or price of production. One such avenue of pigment research is focused on organically derived pigments from plants. These pigments are widely available and cheap to produce. Multiple plant-based dyes are tested in solar cells, such as black rice and rosa xanthia (Hao, et. al. 2006). The viability of the pigments directly involved in photosynthesis (chlorophylls) are also tested, but the test pigments used are based on structures related to or derived from chlorophyll rather than the actual pigment (Kay & Gratzel, 1993). Past research at UCO has also tested the viability of whole chloroplasts being used as a photoreceptor (Porter, Tetreault & Bidlack, 2013). However, testing the viability of naturally complementary pairs of chlorophylls, chloroplasts and other plant pigments is a novel idea. Experiments examining the effects of anthocyanin, crude chlorophyll extract, and whole chloroplasts individually and in combination of chloroplasts/chlorophylls and the natural co- occurring anthocyanin attempt to determine the yield possible and overall yield-to- cost ratio of dye-sensitized solar cells utilizing the aforementioned photoreceptors. The Purple Heart plant (Tradescantia pallida) was chosen due to possession of accessory pigment and availability. See Figure 1.. Figure 1 - Purple Heart plant growing – Photo: By KENPEI (KENPEI's photo)[GFDL ( Literature Cited Bidlack, James E. (2012). Plant Physiology Laboratory Manual Spring Grätzel, M. (2003). Dye-sensitized solar cells. Journal of Photochemistry and Photobiology C: Photochemistry Reviews, 4, Hao, S., Wu, J., Huang, Y. & Lin, J. (2006). Natural dyes as photosensitizers for dye-sensitized solar cell; Solar Energy, 80(2), Kay, A. & Grätzel, M. Artificial photosynthesis. 1. photosensitization of titania solar cells with chlorophyll derivatives and related natural porphyrins. Journal of Physical Chemistry, 97(23), KENPEI's Photo (2007). Tradescantia pallida 'Purpurea.' [Photo]. Retrieved from upload.wikimedia.org/wikipedia/commons/d/dc/Tradescantia_pallida_Purpurea1.jpg Porter, H., Tetreault, B. & Bidlack, J. (2013). Use of chloroplasts and anthocyanin in photovoltaic cells. Poster presented at Oklahoma Research Day Abstract Additional experiments are being pursued to determine the viability of using various plant pigments and parts, from the same plant, in dye-sensitized solar (photovoltaic) cells. Cells were created using glass doped with a thin film of tin oxide, one side with titanium dioxide annealed onto the plate and then treated with various plant-derived materials, serving as the anode, and another was coated with graphite, acting as the cathode. Anodes were treated drop-wise with chlorophyll, chloroplasts, and anthocyanin extracted from the leaves of Purple Heart (Tradescantia pallida) in order to impregnate the titanium dioxide with dye. Lugol’s solution (KI/I 2 ) was added as an electrolyte and the two cell halves were fixed together using super glue. Cells were then connected to a voltmeter and output was measured. Output of various cell treatments are currently being evaluated in a longevity study using a Pico Recorder. At this time, treatment cells are producing at least 200 millivolts (open circuit) with some cells boasting over 1,000 millivolts of output for periods of time. Table 1 – Cell treatments and voltages Results and Discussion Cells that recorded an error value on the voltmeter (produced no voltage) were excluded from analysis. ANOVA found significant difference between cell treatments (F = 2.665, p <.048). Levene's test indicated that the assumption of homogeneity of variance was violated, p <.001. After correcting for the violation of homogeneity of variance, no significant difference was found between treatments. Cell construction requires many procedures that are hard to replicate and qualitative in nature. The massive differences in standard deviation despite meticulous attempts at replication point to the need for a less human-influenced construction method. Methods explored include spray pyrolysis and electrophoretic deposition. These methods involve high cost equipment and were not feasible for such a project, but future research will require a more controllable approach. Figure 3 demonstrates one issue with the current construction recipe, as some charred tape residue can be seen on the sides of cells. This effect has not been verified, but it is suspected to hinder conductance by impeding contact of conductive material. The large standard deviation values, occurring even in the control condition, make claims about treatment quality invalid when considering this study. A repetition with better control for cell quality is necessary to accurately test the validity of dyes. Acknowledgements Funding for this project was provided by a Research, Creative, and Scholarly Activities (RCSA) grant from the Office of Research and Grants at the University of Central Oklahoma. Electrical Measurement and Recording Attaching constructed cells to a voltmeter using alligator clips allowed for voltage measurement. See Figure 5. This is then added to a circuit including a rheostat in order to vary resistance. This varied resistance along with voltage readings were used for calculation of current and power output across multiple resistances, which is useful for selecting resistors. After 1 week had elapsed, cells were measured for open circuit voltages using a voltmeter. See Table 1. All cells were measured in an environmental chamber with artificial sunlight and controlled temperature. See Figure 6 Figure 5 – Voltmeter connected to cells in the environmental chamber Materials and Methods Solar Cell Construction Cells construction was performed starting with two glass plates coated on one side with tin oxide. These plates were then separately treated to create anodes and cathodes. Anode construction involved spreading an even layer of titanium dioxide mixture, consisting of a ratio of 0.5 grams of titanium dioxide to 1 ml of acetic acid solution (ph 3) to 0.25 ml of Triton X, into a square shaped mold onto the conductive tin-coated side of a glass plate (this ratio seems to provide the best liquid consistency for application of anode layer). This layer was then heated to over 500 degrees Celsius in order to anneal the titanium dioxide onto the glass, finishing the anode construction. Cathode construction consisted of crosshatching the tin-coated glass plates with a pencil, leaving traces of graphite behind. The cell halves, after treatment with dye, then had a potassium iodide/iodine solution added to facilitate electron transfer and are finished by being glued together using superglue. Cell halves were glued at a slight offset in order to allow the attachment of wires to measure and utilize generated energy. Treatment Isolation and Application Chloroplasts were isolated by homogenizing 5 grams of finely diced purple heart leaves leaves in a sugar grinding solution, which is then centrifuged multiple times to pellet chloroplasts and allow removal of other cell parts (Bidlack 2012). Chloroplasts were examined under a light microscope to ensure limited damage and lack of free pigments. Anthocyanin extraction consisted of boiling Purple Heart leaves in a beaker of deionized water over a hot plate. See Figure 2. The boiling water was a quality solvent for anthocyanin and the pigment moved into solution. Chlorophyll extraction was performed crudely by mixing leaf parts vigorously with acetone until the solution was saturated with chlorophyll. All treatments were mixed with adequate amounts of sugar grinding solution to control for the extra energy that would only be present in the chloroplast solution due to its solvent of choice. See Figure 3. Treatments were applied randomly using a number sequence generator from Random.org. The conditions included chlorophyll, chloroplasts, anthocyanin, chlorophyll with anthocyanin, chloroplasts with anthocyanin, and a sugar grinding solution control. Treatments received an arbitrary number categorization in order to be randomly assigned to each arbitrarily numbered cell. The cells were then treated drop- wise with 50 microliters of treatment solution every hour for 5 hours. See Figure 4. After the final drop treatment, cells were left to dry for an hour and then final cell construction proceeds as described above. Figure 2 – Extraction of anthocyanin from Purple Heart Leaves. Figure 3 – Prepared cell treatments. Left to right: anthocyanin, chloroplasts, chlorophyll, chlorophyll mixed with sugar solution, anthocyanin, chlorophyll and sugar mixture, anthocyanin with sugar solution, and anthocyanin, chloroplast and sugar mixture. Treatment Number of cells Mean VoltageStandard Deviation Control Chlorophyll Chloroplast Chlorophyll & Anthocyanin Chloroplast & Anthocyanin Anthocyanin Figure 4 – Treated cells drying with labels. Anode side only.