Chapter 1: Tools of Geometry

Slides:



Advertisements
Similar presentations
Geometry Terms: Chapter 1.
Advertisements

Chapter 1: Tools of Geometry
Geometric Terms 7 Math: Sections 7-1 and 7-2. Lines and Planes Point - indicates a location in space. Line - A series of points that extend forever in.
Line Segments and Angles
a location in space that has no size.
Chapter 1.1 Common Core G.CO.1 Know precise definitions of angle, circle, perpendicular line, parallel line, and line segment, based on the undefined notions.
Definitions and Examples of Geometric Terms
Bellringer Your mission: Construct a perfect square using the construction techniques you have learned from Unit 1. You may NOT measure any lengths with.
Line and Angle Relationships
Chapter 1 Tools of Geometry.
Basic Geometric Figures
1-5 Angle Relationships What are: adjacent angles linear pairs
Tools of Geometry Chapter 1 Vocabulary Mrs. Robinson.
§2.1 Introductory Material The student will learn about: and the beginning postulates to be used in this course. definitions of basic terms, 1.
Definitions of Key Geometric Terms A quick review of material covered in Math A La Salle Academy, Mrs. Masullo.
 Give an example of a point, line and plane that can be found in the classroom.
Unit 1 Describe and Identify the three undefined terms, Understand Segment Relationships and Angle Relationships.
POINTS, LINES, AND PLANES. UNDEFINED TERMS Point: a location Terms defined only by examples and descriptions Line: a set of points that goes on infinitely.
Points, Lines, and Planes Sections 1.1 & 1.2. Definition: Point A point has no dimension. It is represented by a dot. A point is symbolized using an upper-case.
CHAPTER 1: Tools of Geometry
Warm Up.
Basic Geometry Review Unit 3 Lesson 1 We will be identifying basic geometric terms. Objectives:  I can Identify and model points, lines, planes, and angles.
1.1 Points, Lines and Planes
Foundations for Geometry Chapter 1 By: Peter Spencer Maria Viscomi Ian McGreal.
Bellringer Discuss with your shoulder partner the following situation… Why does a four-legged chair sometimes wobbles, but a three legged chair never.
Chapter 1 Essentials of Geometry. 1.1 Identifying Points, Lines, and Planes Geometry: Study of land or Earth measurements Study of a set of points Includes.
1.1 Segment Length and Midpoints
Lesson 1-1 Point, Line, Plane Modified by Lisa Palen.
Unit 1 Learning Outcomes 1: Describe and Identify the three undefined terms Learning Outcomes 2: Understand Angle Relationships.
Example 1.Name all angles with B as a vertex. 2. Name the sides of angle Write another name for angle 6.
Geometry Introductory Terms
Basics of Geometry Defining Terms
Lesson 4: Angle Measure. » Degree- the unit of measurement for an angle » Ray- a part of a line which has one endpoint and one end that extends infinitely.
Angle Relationship Sec 1.5 Sol: G.3 and G.11. Angle Relationship Sec 1.5 Sol: G.3 and G.11.
MTH 232 Section 9.1 Figures in the Plane. Overview In this section we consider the most basic shapes of geometry: 1.Points 2.Lines 3.Segments 4.Rays 5.Angles.
Undefined Terms and Definitions. Undefined Terms Point simply a location represented by a dot named with a capital letter no shape no size.
Vocabulary book review. Objectives Can you define and identify basic geometric terms?
Chapter By Skyler Cassity & Ryan Tourial.
Vocabulary Word: Supplementary Angles Definition: Two angles whose sum is 180°.
Basics of Geometry Chapter Points, Lines, and Planes Three undefined terms in Geometry: Point: No size, no shape, only LOCATION.  Named by a single.
Welcome to Geometry Unit 1 Vocabulary. Undefined Terms Point In Euclidean geometry, a point is undefined. You can think of a point as a location. A point.
Points, Lines, and Planes SWBAT identify collinear and noncollinear points, lines, line segments, rays, angles, parallel lines, and skew lines; read and.
Solve each equation. 1.5(x – 6) = 402.5b = 2(3b – 8)3.2y + 6y = 15 – 2y x + 8 > 20 Absolute Value Equations and Inequalities Solve each inequality.
Geometry Unit 2. Points Lines Planes There are three undefined terms in geometry: Point Line Plane *They are undefined because they have to be explained.
Chapter 2 Introducing Geometry. Lesson 2.1 Definition – a statement that clarifies or explains the meaning of a word or a phrase. Point – an undefined.
Geometry Basic Concepts Chapter 1 Unit 1 Coordinate Geometry and Basic Constructions.
GEOMETRY UNIT 3 VOCABULARY ALL ABOUT ANGLES. ANGLE DEFINITION Angle A figure formed by two rays with a common endpoint.
PALMER RIDGE HIGH SCHOOL Geometry Mrs. Rothwell Fall Semester 2015.
Lesson 1-1 Point, Line, Plane
What kind of angle is
Points, Lines, and Planes. Even though there is no formal definition for these terms, there is general agreement of their meaning: A point is a dimensionless.
Measures and Relationships.  Ray – part of a line that includes one endpoint and extends infinitely in one direction  Opposite rays – rays that share.
Chapter 1: Basics of Geometry
Basics of Geometry Chapter 1.
Geometry Basic Terms Unit 1 Vocabulary.
Good Morning  Please take out your flashcards.
Chapter 1 Basics of Geometry.
Chapter 1 Basics of Geometry.
Chapter 1: Tools of Geometry
Geometry vocab. tHESE SHOULD also be DONE ON INDEX CARDS AND YOU SHOULD BE CONSTANTLY REVIEWING THEM AS WE GO!
*YOU SHOULD CONSTANTLY BE REVIEWING THIS VOCABULARY AS WE GO!
Line and Angle Relationships
Chapter 1: Tools of Geometry
1-5 Angle Relations.
1.1 Points, Lines, and Planes 1.3 Distance and Midpoints
Measures and Relationships
undefined term definition defined term space point line plane
PLANE A plane is a FLAT surface made up of points that extends indefinitely in all directions. Symbolic Notation: Plane V.
Vocabulary undefined term point line plane collinear coplanar
Geometry Ms. Toney.
Presentation transcript:

Chapter 1: Tools of Geometry Lesson 1: Points, Lines and Planes

Definitions Point- represents a location Line- made up of points and has no thickness or width, extends infinitely at both ends (cannot be measured) Collinear- points on the same line Plane- flat surface made from points that has no depth and extends in all directions infinitely Coplanar- points or lines on the same plane Space- boundless, 3-D set of all points that contains lines and planes

Chapter 1 Foldable Step 1- fold the construction paper in half both by width and length (hamburger and hotdog) Step 2- Unfold the paper and hold width wise, fold in the ends until they meet at the center crease Step 3- Cut the folded flaps along the crease so that there are now 4 flaps

Upper Left flap- Lesson 1.1 Points, Lines and Planes Label the outside of the flap with the lesson number and title. Inside the flap create a grid with 7 columns and 4 rows.

Copy the notes into the foldable, then draw and label your own examples based on the information in the chart. Name Model Drawn Named By Facts Words/ Symbols Examples Point As a dot A capitol letter A point has neither size nor shape point P Line With an arrowhead at both ends Two letters representing points on the line- or the script letter There is exactly 1 line through any two points line n line AB line BA Plane As a shaded, slanted, 4-sided figure A capital script letter or by any three letters of non-collinear points There is exactly 1 plane through any three non-collinear points plane S plane XYZ plane XZY plane ZXY plane ZYX plane YXZ plane YZX P n B A X Y Z S

A. Use the figure to name a line containing point K. B. Use the figure to name a plane containing point L. C. Use the figure to name the plane two different ways.

A. Name the geometric shape modeled by a 10  12 patio. B. Name the geometric shape modeled by a water glass on a table. C. Name the geometric shape modeled by a colored dot on a map used to mark the location of a city. D. Name the geometric shape modeled by the ceiling of your classroom.

A. How many planes appear in this figure? B. Name three points that are collinear. C. Are points A, B, C, and D coplanar? Explain.

Chapter 1: Tools of Geometry 1.2 Linear Measure

Definitions Line segment- part of a line that has two endpoints and can be measured(named by the letters marking the endpoints) Congruent- same shape and size (segments that have the same measure)

A. Find LM. B. Find XZ.

C. Find x and ST if T is between S and U, ST = 7x, SU = 45, and TU = 5x – 3.

Find SE.

Find a if AB = 4a + 10, BC = 3a – 5, and AC = 19.

Chapter 1: Tools of Geometry Lesson 3: Distance and Midpoint

Definitions Midpoint- the point on a segment that divides the segment into two congruent segments Segment bisector- any line, segment or plane that intersects a segment at its midpoint

Distance and Midpoint Distance Formula- used to find the length of a segment. ex: Find the distance between A (5,1) and B (-3, -3). *on a number line- subtract the endpoint values Midpoint Formula- used to find the point half way down a segment ex: Find the midpoint of JK if J(-1,2) and K(6, 1) * on a number line- add the endpoint values and divide by 2

Use the number line to find the midpoint and the measure of AX.

Find the midpoint and distance between E(–4, 1) and F(3, –1).

Find the distance and midpoint of AM

Find the coordinates of R if N (8, –3) is the midpoint of RS and S has coordinates (–1, 5).

Find LM. Assume that the figure is not drawn to scale.

Find the value of x and ST if T is between S and U, ST = 7x, SU = 45, and TU = 5x – 3.

Find the value of n and WX if W is between X and Y, WX = 6n – 10, XY = 17, and WY = 3n.

Chapter 1: Tools of Geometry Lesson 4: Angle Measure

Definitions Degree- the unit of measurement for an angle Ray- a part of a line which has one endpoint and one end that extends infinitely (name with the endpoint first and then any other point on the ray) Opposite rays- two rays that share an endpoint and extend in opposite directions (together they make a line) Angle- formed by two non-collinear rays that have a common endpoint Sides of an angle- rays Vertex- the common endpoint of the rays of an angle Angle Bisector- a ray or line that divides an angle into two congruent angles

Naming and Classifying Angles -B is the vertex -ray BA and ray BC are the sides( BA and BC ) -Angle names: ABC, CBA B, 4 -Angle bisector : makes 2 congruent angles Name Measure Model Right Angle 90 Acute Angle Less than 90 (0 < x < 90) Obtuse Angle Between 90 and 180 (90 < x < 180) 4 B C

A. Name all angles that have B as a vertex. B. Name the sides of 5. C.

A. Measure TYV and classify it as right, acute, or obtuse. B. Ray YT bisects angle SYU. Angle TYS = 2x-24, angle UYT = x+16. Find x and the measure of angle SYU.

Chapter 1: Tools of Geometry Lesson 5: Angle Relationships

Definitions Adjacent angles: two angles that lie in the same plane, have a common vertex and a common side, but no common interior points Vertical angles: two nonadjacent angles formed by two intersecting lines Linear pair: a pair of adjacent angles with non-common sides that are opposite rays Complementary angles: two angles with measures that add up to 90 Supplementary angles: two angels with measures that add up to 180 Perpendicular ( ): lines, segments or rays that form right angles

Angle Relationship examples Adjacent angles Vertical angles Linear pair Complementary angles Supplementary angles Perpendicular lines D M A O C B L N E D B A 72 18 C R U S V 40 140 T

A. Name two adjacent angles whose sum is less than 90. B. Name two acute vertical angles.

Find the measures of two supplementary angles if the measure of one angle is 6 less than five times the measure of the other angle.

A. Name an angle supplementary to BEC. B. Name a linear pair whose vertex is E. C. Name two acute vertical angles.

Find the measures of two complementary angles if one angle measures six degrees less than five times the measure of the other.

The supplement of A measures 140 degrees The supplement of A measures 140 degrees. What is the measure of the complement of A?

ALGEBRA Find x and y so that KO and HM are perpendicular.