Forces in Equilibrium.

Slides:



Advertisements
Similar presentations
FORCE A force is any influence that can change the velocity of a body. Forces can act either through the physical contact of two objects (contact forces:
Advertisements

 The force that act on the object are balanced in all direction.  The force cancel each other, so that the resultant force or net force is zero.  Newton’s.
Normal Force Force on an object perpendicular to the surface (Fn)
Make a sketch Problem: A 10.0 kg box is pulled along a horizontal surface by a rope that makes a 30.0 o angle with the horizontal. The tension in the rope.
Net Force Problems There are 2 basic types of net force problems
Forces applied at an Angle & Inclined Planes
Forces in Two Dimensions - Objectives 1.Addition of ForcesAddition of Forces 2.Resolution of ForcesResolution of Forces 3.Equilibrium and StaticEquilibrium.
Forces and the Laws of MotionSection 4 Click below to watch the Visual Concept. Visual Concept Everyday Forces.
Chapter 4- Forces and Motion
Newton’s Laws of Motion. HFinks '072 6/2/2015 Basic Concepts  Force – push or pull on an object - Vector quantity  Mass – amount of matter in a body.
Forces and Free-Body Diagrams
NEWTON'S LAWS OF MOTION There are three of them.
 Force on objects whose surfaces are in contact  Acts in the opposite direction of motion  Acts parallel to the surface.
Inclined Plane Problems
Chapter 4 Forces and the Laws of Motion. Chapter Objectives Define force Identify different classes of forces Free Body Diagrams Newton’s Laws of Motion.
Kinematics – the study of how things move Dynamics – the study of why things move Forces (the push or pull on an object) cause things to move Aristotle.
Newton’s Laws - continued
NEWTON’S FIRST LAW Definition- An object at rest will remain at rest, or if it is moving, it will continue to move with constant velocity, unless acted.
Lesson #33 Topic: Lesson #33 Topic: Net force in two dimensions Objectives: (After this class I will be able to) 1.Examine Normal force and observe different.
What is the weight of a 15 kg rock?
Newton’s Laws and Dynamics
Do Now: What are Newton’s 3 Laws of Motion?. Do Now: What are Newton’s 3 Laws of Motion?
AP Physics I.B Newton’s Laws of Motion. B.1 An interaction between two bodies resulting in a push or a pull is a force. Forces are of two types: contact.
Forces in Two Dimensions
What is the normal force for a 500 kg object resting on a horizontal surface if a massless rope with a tension of 150 N is acting at a 45 o angle to the.
Newton’s Laws - continued Friction, Inclined Planes, N.T.L., Law of Gravitation.
Chapter 4 Dynamics: Newton’s Laws of Motion. Units of Chapter 4 Force Newton’s First Law of Motion Mass Newton’s Second Law of Motion Newton’s Third Law.
Forces and Newton’s Laws of Motion. 4.1 The Concepts of Force and Mass A force is a push or a pull. Arrows are used to represent forces. The length of.
PAP Physics. Unit is the NEWTON(N) Is by definition a push or a pull Can exist during physical contact (Tension, Friction, Applied Force) Can exist with.
Chapter 4 Dynamics: Newton’s Laws of Motion. Units of Chapter 4 Force Newton’s First Law of Motion Mass Newton’s Second Law of Motion Newton’s Third Law.
What is a Force? A force is a push or a pull causing a change in velocity or causing deformation.
Physics Lesson 8 Static Equilibrium Eleanor Roosevelt High School Chin-Sung Lin.
Chapter 7-1 Forces and Motion in Two-Dimensions. Equilibrium An object is in equilibrium when all the forces on it add up to zero.
Newton’s First Law Honors Physics. Net force – combination of all forces acting on an object. (F net ) Balanced forces – forces that are equal in magnitude.
Practice with Kinetic Friction Renate Fiora. Let’s try solving a problem involving kinetic friction. Remember the equation for the force of friction:
Force Diagrams And Types of Forces. Review Force = push or pull. Measured in Newtons. –1 lb = 4.45 N F net = ma a = F net / m Big force = big acceleration.
Applications & Examples of Newton’s Laws. Forces are VECTORS!! Newton’s 2 nd Law: ∑F = ma ∑F = VECTOR SUM of all forces on mass m  Need VECTOR addition.
Dynamics: Newton’s Laws of Motion
Dynamics: Newton’s Laws of Motion
Friction Friction Problem Situations. Friction Friction F f is a force that resists motion Friction involves objects in contact with each other. Friction.
Friction Ffriction = μFNormal.
Friction What is friction?. Answer Me!!! Think of two factors that affect friction.
Section 4–4: Everyday Forces Coach Kelsoe Physics Pages 135–143.
Friction. Biblical Reference And they pulled him up with the ropes and lifted him out of the cistern. Jeremiah 38:13.
The tendency of objects to resist change in their state of motion is called inertia  Inertia is measured quantitatively by the object's mass.  Objects.
Forces and the Laws of Motion
Chapter 5 Two Dimensional Forces Equilibrium An object either at rest or moving with a constant velocity is said to be in equilibrium The net force acting.
Resolving Forces Into Vector Components Physics Montwood High School R
Box slides along horizontal at velocity constant. FfFf FpFp FwFw v c therefore,  F = 0 ; F p + F f = 0 ; F F = -F p Rest, therefore,  F = 0 ; F W +
Newton’s Laws.
Dynamics: Newton’s Laws of Motion. Force A force is a push or pull. An object at rest needs a force to get it moving; a moving object needs a force to.
Push and Pull Newton’s Laws. Newton’s First Law An object at rest remains at rest, and an object in motion continues in motion with constant velocity.
Chapter 4 Dynamics: Aim: How can we describe Newton’s Laws of Motion? © 2014 Pearson Education, Inc.
Forces and the Laws of Motion Chapter 4. Forces and the Laws of Motion 4.1 Changes in Motion –Forces are pushes or pullss can cause acceleration. are.
REVISION NEWTON’S LAW. Quantity with magnitude and direction. e.g. displacement, velocity, acceleration, force and weight.. VECTOR Quantity having only.
Lesson 4.4 Everyday Forces Essential Question: What are some of the everyday forces?
Forces in Equilibrium & Motion along an Incline Chapter 7.1.
Chapter 4 Dynamics: Newton’s Laws of Motion. Units of Chapter 4 Force Newton’s First Law of Motion Mass Newton’s Second Law of Motion Newton’s Third Law.
Practice with Inclined Planes
Weight = mass x acceleration due to gravity
“ Friendship is like peeing on yourself; everyone can see it, but only you get the warm feeling it brings.” Funnyquotes.com Course web page
4-8 Applications Involving Friction, Inclines
The “Spring Force” If an object is attached to a spring and then pulled or pushed, the spring will exert a force that is proportional to the displacement.
Unit is the NEWTON(N) Is by definition a push or a pull Can exist during physical contact(Tension, Friction, Applied Force) Can exist with NO physical.
Example Problems for Newton’s Second Law Answers
Dynamics: Newton’s Laws of Motion
Everyday Forces Friction Force. Types of Friction forces
Objectives Chapter 4 Section 4 Everyday Forces
Two Dimensional Forces
Forces applied at an Angle & Inclined Planes
Presentation transcript:

Forces in Equilibrium

Forces in Equilibrium Equilibrium exists when all the forces acting on an object are canceled out. No net force = no acceleration = constant speed. Constant speed can mean zero speed. v = constant v = 0 m/s

Forces in Equilibrium Forces are balanced. Not necessarily equal! Right-left and up-down components add out to zero, but forces may be different.

Forces in Equilibrium Most problems focus on finding the equilibrant force. Equilibrant – force needed to exactly balance out other forces. If applied, results in zero acceleration (constant speed).

Forces in Equilibrium Three dogs are pulling on a frisbee. The first dog pulls with a force of 500. N at an angle of +30º. The second dog pulls with a force of 300. N at an angle of -130º. With what force (and at what angle) must a third dog pull to balance the force of the first two dogs? First: Draw a force diagram to guide your thinking. Second: Solve for the resultant force of the first two dogs. Third: Find the angle opposite the resultant force for your equilibrant force.

Forces in Equilibrium Now add the vectors to find the resultant. First resolve the 500. N force: horiz. = (500.N)(cos30º) horiz. = 433 N vert. = (500. N)(sin30º) vert. = 250. N Next resolve the 300. N force: horiz. = (300. N)(cos -130º) horiz. = -193 N vert. = (300. N)(sin -130º) vert. = -230. N 250. N 30º 500. N 300. N -130º -230. N 433 N -193 N

Forces in Equilibrium Add the vectors to find the resultant: Resultant horizontal: 433 N + -193 N = 240. N Resultant vertical: 250. N + -230. N = 20. N Resultant magnitude: SQRT((240. N)2 + (20. N)2) SQRT(58 000 N2) 241 N Resultant angle: Arctan(20. N / 240. N) 4.8º 250. N 500. N 20. N -230. N 433 N 240. N 300. N -193 N

Forces in Equilibrium The equilibrant force is exactly opposite the resultant force. Resultant angle: 4.8º Equilibrant angle: 4.8º - 180º Equilibrant angle: -175.2º 241 N -175.2º

Forces in Equilibrium At a point halfway between the Earth and the Moon, a stationary rocket feels 217 N of gravitational attraction to the Earth and 3 N of attraction to the Moon. What is the net gravitational force acting on the rocket? How much thrust (in N) will the rocket need to exert to remain stationary, and in what direction?

Forces in Equilibrium First, draw a force diagram to represent the situation: 217 N 3 N

Forces in Equilibrium What is the net force acting on the rocket? 217 N – 3 N = 214 N Earth-ward. What thrust must the rocket exert to remain stationary? 214 N Moon-ward.

Forces in Equilibrium A 250.-kg crate is being lifted vertically at a constant speed by two cables that form an angle of 30º with the vertical. What is the weight of the crate? What is the tension in each cable?

Forces in Equilibrium What forces are acting on the crate? Weight Two tension forces. If the crate is moving upward at a constant speed, what can we say about these forces? They must cancel out to zero, or the crate would be accelerating. 250kg 30º

Forces in Equilibrium What is the weight of the crate? Fw = mg Fw = (250. kg)(9.81 m/s2) Fw = 2450 N The vertical components of the two tension forces must add up to 2450 N. Since there are two tensional forces (at equal angles), the vertical component of each force is therefore 2450 / 2, or 1230 N. 250kg 1230 N

Forces in Equilibrium Knowing the vertical component and angle of one of the tension forces, we can calculate the tension force itself. cos30º = (1230 N)/(Ft) Ft = (1230 N) / (cos30º) Ft = (1230 N) / (0.866) Ft = 1420 N Because the angles are the same, the tension is the same in both cables (1420 N). 250kg 1230 N

Forces in Equilibrium A 20.0-kg box slides down a 40º ramp at constant speed. What is the coefficient of kinetic friction between the box and the ramp? Simple solution:  = tan40º = 0.84 More complicated solution: Draw a force diagram. Calculate weight, normal force, and friction. Calculate  as Ff / FN

Forces in Equilibrium FN Ff Fw As always, draw a force diagram first! Start by calculating the weight. Fw = (20.0 kg)(9.81 m/s2) Fw = 196 N 40º Fw Ff FN

Forces in Equilibrium FN Ff Fw It may be helpful to rotate the coordinate plane so that the “horizontal” axis runs parallel to the incline. Next, find the normal force. FN = Fw*cos FN = (196 N)(cos40º) FN = 150. N 40º Fw Ff FN 150. N

Forces in Equilibrium FN Ff Fw Calculate the component of the weight that is parallel to the inclined surface. Fpar = Fw*sin Fpar = (196 N)(sin40º) Fpar = 126 N The friction force must be the same as the parallel component of the weight (or the box would be accelerating). Ff = 126 N 40º Fw Ff FN 150. N 126 N 126 N

Forces in Equilibrium FN Ff Fw Finally, use the friction equation to solve for . Ff = FN (126 N) = (150. N)  = (126 N)/(150. N)  = 0.840 Gives the same answer we calculated before using the simple method. Simple method only works if friction and parallel component of weight are the same (constant speed). 40º Fw Ff FN 150. N 126 N

Forces in Equilibrium A child weighing 200. N is sitting in a swing. The child’s mother pulls the swing back so that the swing makes an angle of 20º with the vertical. How much force must the mother exert horizontally to hold the child in that position?

Forces in Equilibrium First, draw a force diagram! We know that the tension force’s vertical component is 200. N, because it is matched by the child’s weight. The applied force must be equal to and opposite from the tension force’s horizontal component. You can calculate the magnitude of the tension force if you like, but it isn’t strictly necessary. 20º Fa Fw Ft 200. N Fa 200. N 20º

Forces in Equilibrium The horizontal component of the tension force is the same as the horizontal force exerted by the mother. tan20º = Fa / 200. N Fa = (200. N)(tan20º) Fa = 72.8 N 20º Fa Fw Ft 200. N