Incorporating : Egmont Doors and totalDOORS | | ULTI-FLEX Group SPECIALIST ACCESS WAY SOLUTIONS Manufactured in New Zealand by Ulti Group

ULTI-FLEX Incorporating : Egmont Doors and totalDOORS | | What is an Ulti-Flex Door? The Ulti-Flex Door is a high speed insulated bi-parting door Designed specifically for cold storage facilities operating at -25 o C or colder Is Bi-Parting in operation Can resist forklift impact Eliminates the presence of ice in the doorway It is a one-piece door system Can resist high wind loads of up to 100km/h The ULTIMATE solution for high use coolroom doorways

ULTI-FLEX Incorporating : Egmont Doors and totalDOORS | | How fast is High Speed? Faster than 2m/second A standard door opening of 2.7m wide will be fully open in less than 2 seconds………regardless of height!! Operating speed is fully adjustable Closing speed is usually set at half the opening speed for safety reasons

ULTI-FLEX Incorporating : Egmont Doors and totalDOORS | | Why Bi-Parting? Reduces impact damage due to being able to see clearly when door is open enough to enter Doorway can be entered earlier as operator only has to wait until door is opened to the widest part of the forklift Safer as full line of sight is available immediately

ULTI-FLEX Incorporating : Egmont Doors and totalDOORS | | High Insulation Door panels are 150mm thick and fully insulated Thermal efficiency = R4.4 (imperial R25) Every time door is closed maximum energy efficiency is achieved Double acting seal system around the door perimeter High thermal efficiency = reduced energy expenditure

ULTI-FLEX Incorporating : Egmont Doors and totalDOORS | | No More Ice! No ice in doorways with the Ulti-Flex door due to: High thermal value of panels Extremely efficient perimeter seals Heat trace built into the door Seals on all four sides Shorter door cycles No more ice means: Lower maintenance costs Increases lifespan of evaporators Improves safety by ensuring a dry floor

ULTI-FLEX Incorporating : Egmont Doors and totalDOORS | | What happens when it gets Hit? The Ulti-Flex door is designed to withstand serious impacts from forklifts Panels can flex and twist to absorb impact and yet still return to its original shape Door panel can release from its guide and swivel on its top wheels to swing away from the impact Automatically repositions itself into its guides Reduces downtime and maintenance costs

ULTI-FLEX Incorporating : Egmont Doors and totalDOORS | | One Door System The Ulti-Flex door is truly a one door system for cool rooms There is no need for: A fabric rapid door A PVC curtain A freezer panel sliding door A traditional freezer panel igloo system A heated sill in the floor It also has a smaller footprint saving approximately one metre of precious ELA or corridor space

ULTI-FLEX Incorporating : Egmont Doors and totalDOORS | | Safety Optional extra safety features include: 2.4m High photo cell towers Virtual Vision Warning flashing lights and audible sirens Standard safety features are: Double through beam photo eyes on outside of door Single photo eye on inside of doorway Motor overload sensor, stops door if closing on an obstruction Simple emergency release system in case of power failure

ULTI-FLEX Incorporating : Egmont Doors and totalDOORS | | How long will they last for? Guaranteed for 24months or 100,000 cycles Tested at 7000 cycles per day Factory and site proven in excess of 200,000 cycles with no need for maintenance Average cold storage operator may operate their door between 45,000 – 65,000 cycles per year

ULTI-FLEX Incorporating : Egmont Doors and totalDOORS | | Options Door can be locked to provide full security Single Slide option for places where you do not have enough side room Wide range of colours