Disassemble, Assemble and Perform a Function Check on the M16/M4

Terminal Learning Objective Action: Disassemble, Assemble and Perform a Function Check on the M16/M4 Series Rifle Conditions: Given a M16/M4 Rifle and a requirement to disassemble, assemble and perform a function check on the weapon Standards: Properly disassemble, assemble and perform a function check on the M16/M4 Series Rifle

Clear Weapon

Remove Sling

Remove Handguards

Push the Takedown Pin Dummy Round

Push the Receiver Pivot Pin Dummy Round

Separate Upper and Lower Receivers

Pull Charging Handle

Remove Bolt Carrier and Group

Remove Charging Handle

Remove Firing Pin Retaining Pin Dummy Round

Remove Firing Pin

Remove Bolt Cam Pin

Remove Bolt Assembly

Remove Extractor and Spring Dummy Round

Remove Buffer and Action Spring Dummy Round

Install Buttstock Assembly

Reassemble the Bolt Carrier Group

Replace Charging Handle

Slide in Bolt Carrier Group

Engage Receiver Pivot Pin

Engage Takedown Pin

Replace Handguards

Replace Sling

Terminal Learning Objective Action: Disassemble, Assemble and Perform a Function Check on the M16/M4 Series Rifle Conditions: Given a M16/M4 Rifle and a requirement to disassemble, assemble and perform a function check on the weapon Standards: Properly disassemble, assemble and perform a function check on the M16/M4 Series Rifle