PGS Introduction "Value Series" : Best VALUE gaming cases with the highest C/P Ratio (Cost to Performance ratio). "Professional Series – Red label" : Super tower or Super mid-tower cases with elegant, clean line designs. "Aluminum – Silver label" : Unique “Full aluminum” cases targeting at power users, professionals and gamers. "Ultimate Gaming Series – Black label" : Ultimate gaming cases targeting at the extreme gamers. This Series offers gamers with most functions, expandability and Extreme cooling. "Compact – Blue Label" : Small form factor case series including cube cases, mini-ITX and Mini-Tower (Micro-ATX). Red

Design Concept Cyborgx CyborgX is a "Stylish" design case with strong personality. Its "Aggressiveness" is what every gamer looks for. It is about "Satisfaction", "Personality" and "Domination" !! This case is solidly constructed and beautifully finished. The combination of "All Black" chassis (both internal and external) and glossy transparent Black side window give this case a stunning look !! The chassis interior is finished in Black and Red combination. It includes Black/Red screw-less kits, Black/Red fans and Red Mesh PCI Covers. The CyborgX is designed with "User-Friendly" concept in mind and it gives gamers great expandability and protection. Its "Screw-less" chassis and pre-drilled holes on the Motherboard plate for cable routing make this chassis an easy install. A CPU hole is also pre- drilled for simple cooler assembly and removable. This chassis offers great expansion capabilities. It can support 5 x 5 1/4“ devices, 1 x 3 1/2” (w/Adapters) device and 5 x Hard Drives. The chassis is also deep enough to support High End VGA cards up to 290mm in length. It maximized airflow with 4 fans including front in-take 12cm Red LED fan (included), Back Exhaust 12cm Red LED fan (included), and dual. 12cm or 14cm side panel fans (optional). Two Dust filters (for PSU and front in-take fan) are included to prevent dust entering your computer. The CyborgX case is an ultimate "Eye" catcher !!!

Gallery FrontOpenBack Side

Features - High Performance "Mid-Tower" for gamers and enthusiasts. - Solidly constructed "All Black" chassis - 0.6mm SECC Japanese steel and beautifully finished ALL BLACK interior. - High-End Graphic Card Support - Supports Longer high-end VGA cards up to 290mm. - High Expandability - Supports 5 x 5.25" bays, 5 x 3.5" HDDs (internal) and 1 x 3.5" (w/Adapters) device such as a Floppy drive or a Card Reader. - Ease of Installation - New "Easy-Install" screw-less kits are included for the 5.25" devices and HDDs. The HDD cage is also rotated 90 degrees for easy installation of HDDs. - Easy Access Top I/O Ports - 2 x USBs, Audio/Mic (AC 97 + HD audio) and E-SATA ports are located on the top panel for easy access. - Smart Cable Management - Cable routing is pre-drilled on the MB so users can hide cables behind the MB tray. - Dust Protection - Includes front and bottom PSU dust filters to prevent dust entering your computer. - Mesh PCI cover - Includes Red Metal Mesh PCI covers for better ventilation. - Bottom PSU position - the bottom PSU location enables PSUs to suck in cold air and provide better air flow for your system. - Water-cooling Support - water-cooling holes are pre-drilled to support water-cooling systems - Easy Cooler Assembly - CPU hole is pre-drilled on the MB plate for simple cooler assembly and removable. - Beautiful Transparent Black Side Window - the Side Window is beautifully finished in "Glossy Transparent Black" and it gives users options to install 2 x 12cm or 14cm fans !!

Specifications Spec Cooling System Case Type Material Motherboards Chassis Dimensions Drive Bays Expansion Slots Max length space available for PCI slots I / O Ports Fan Rated voltage Voltage range Starting voltage Power consumption Rated current Speed Air Flow (CFM) Air pressure Noise (dBA) Bearing :::::::::::::::: :::::::::::::::::::::: Middle Tower SECC 0.6mm ATX & Micro ATX 460(H) x 200(W) x 540(D) 5 x 5.25" (External) 、 1 x 3.5" (w/Adapters) 5 x HDD (Hidden) 7 Slots 290 mm 2 x USB2.0 / e-SATA / Mic & headphone (AC97 & HD audio) 120 x 120 x 25mm 12V DC6V~13.8V 9V 2.4W 0.20A 1500 RPM +- 10% CFM (Max) 2.1mm H2O dBA Sleeve 120 x 120 x 25mm 12V DC6V~13.8V 9V 2.4W 0.20A 1500 RPM +- 10% CFM (Max) 2.1mm H2O dBA Sleeve Front "Quad RED LEDs" Rear "Quad RED LEDs"

Air Flow Superb airflow - install up to 4 fans !! 1. Front - 1 x 12cm RED LED fan included 2. Back - 1 x 12cm RED LED fan included 3. Side (left panel) - 2 x 14 or 12cm RED LED fan (optional)

Inside Tool-fee for 5.25” bay Provide easy access to CPU cooler’s back plate Pre-drill pipe holes for water cooling Filter included to prevent dust from entering PSU Sufficient depth of chassis for installing long cards Squeeze and pull HDD rack Pre-drilled holes for cable management Front air intake 12cm fan with red LEDs

Close Up