Modelling Water Scrubbing Biogas Based Technology William Nock, Sonia Heaven, Charles Banks Faculty of Engineering and the Environment, University of Southampton.

Slides:

Advertisements

Similar presentations

Heat Transfer in Fermentation

Advertisements

Assumptions: Incompressible substance, B. Negligible heat transfer

Interfacial Mass Transfer in Gas-Liquid Reactors

Air Stripping (Section 9 – 1)

Modelling & Simulation of Chemical Engineering Systems

BASIC DESIGN EQUATIONS FOR MULTIPHASE REACTORS

Mathematical Modeling Overview on Mathematical Modeling in Chemical Engineering By Wiratni, PhD Chemical Engineering Gadjah Mada University Yogyakarta.

Lesson 4 THERMODYNAMIC SYSTEMS AND PROCESSES DESCRIBE the following types of thermodynamic systems: – Isolated system – Closed system – Open system DEFINE.

ERT 313/4 BIOSEPARATION ENGINEERING MASS TRANSFER & ITS APPLICATIONS

Coupling between mass transfer and chemical reactions during the absorption of CO2 in a NaHCO3-Na2CO3 brine : experimental and theoretical study CRE XI,

Flow scheme of gas extraction from solids Chapter 3 Supercritical Fluid Extraction from Solids.

Dr. R. Nagarajan Professor Dept of Chemical Engineering IIT Madras Advanced Transport Phenomena Module 9 Lecture 39 1 Students Exercises: Numerical Questions.

Michael Naas, Teddy Wescott, Andrew Gluck

高等輸送二 — 質傳 Lecture 7 Fundamentals of Mass Transfer

The oxygen transfer process

PERFORMANCE STUDIES OF TRICKLE BED REACTORS

Mass Balances. Fundamental Principle of (Dynamic) Mass Balances The rate at which something accumulates in a region of interest (a “control volume”) equals.

Thermodynamics can be defined as the science of energy. Although everybody has a feeling of what energy is, it is difficult to give a precise definition.

Process Dynamics Lecture 1 ChE 479 Fall 2000 Pr. Alexander Couzis.

Monroe L. Weber-Shirk S chool of Civil and Environmental Engineering Fluid Kinematics Fluid Mechanics July 14, 2015 

Monroe L. Weber-Shirk S chool of Civil and Environmental Engineering Fluid Kinematics Fluid Mechanics July 15, 2015 Fluid Mechanics July 15, 2015 

Meshal Khaled Al-Saeed Dr. Malik Al-Ahmad

Introduction to API Process Simulation

THEORETICAL MODELS OF CHEMICAL PROCESSES

Fixed Bed Reactor Quak Foo Lee Chemical and Biological Engineering

© 2015 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 32.

Prediction of heat and mass transfer in canister filters Tony Smith S & C Thermofluids Limited PHOENICS User Conference Melbourne 2004 Co-authors - Martin.

BsysE595 Lecture Basic modeling approaches for engineering systems – Summary and Review Shulin Chen January 10, 2013.

Modeling & control of Reactive Distillation

James Sprittles BAMC 2007 Viscous Flow Over a Chemically Patterned Surface J.E Sprittles Y.D. Shikhmurzaev.

Film Cooling in LF Rockets Erin Schmidt. Watch the Heat! Temperatures in LF rocket engines can reach 3600 K Heat transfer rates are on the order of 200.

© 2014 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 19.

高等輸送二 — 質傳 Lecture 8 Forced convection

Steel Refinement by Gas Injection Gene Baump ME447 Term Project Presentation.

Partial Oxidation of Benzene to Maleic Anhydride

© 2015 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 33.

1 Combined Heat and Mass Transfer Model in Amines System Xiao Luo and Hallvard F. Svendsen Norwegian University of Science and Technology (NTNU) Trondheim,

Modelling & Simulation of Chemical Engineering Systems Department of Chemical Engineering King Saud University 501 هعم : تمثيل الأنظمة الهندسية على الحاسب.

Foam Flow Meeting, Jul.9th, Foam Flow Instability Analysis Shu Luo The University of Tulsa.

Prof. Mohammad Asif Room 2B45, Building 3

Experimental study of gas-liquid mass transfer coupled with chemical reactions by digital holographic interferometry C. Wylock, S. Dehaeck, T. Cartage,

Recycle packed column reactor: - allow the reactor to operate at high fluid velocities. - a substrate that cannot be completely processed on a single.

INTRODUCTION Many heat and mass transfer processes in column apparatuses may be described by the convection – diffusion equation with a volume reaction.

FLOW THROUGH GRANULAR BEDS AND PACKED COLUMN

1 CHEM-E7130 Process Modeling Exercise. 2 Exercises 1&2, 3&4 and 5&6 are related. Start with one of the packages and then continue to the others. You.

Thermodynamics and kinetics of transformation reactions Chapter 12.

© 2015 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 33.

Combustor modeling Webinar

Pressure drop in PBR Lec 10 week 13. Pressure Drop and the Rate Law We now focus our attention on accounting for the pressure drop in the rate law. to.

© 2015 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 37.

© 2015 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 37.

Module 4b Absorbers. MCEN 4131/ Preliminaries VOC project assignment Project night this Thurs 5-6:30 Party Thurs Apr The Sink.

© 2016 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 38.

CHAPTER 2 MASS BALANCE and APPLICATION

Dr. Owen Clarkin School of Mechanical & Manufacturing Engineering Summary of Energy Topics Chapter 1: Thermodynamics / Energy Introduction Chapter 2: Systems.

Concept of HETP, HTU and NTU

攪拌與通氣 Agitation and Aeration

© 2016 Carl Lund, all rights reserved A First Course on Kinetics and Reaction Engineering Class 40.

Lecture 32 Chemical Reaction Engineering (CRE) is the field that studies the rates and mechanisms of chemical reactions and the design of the reactors.

Mass Transfer transport of one constituent from a region of higher concentration to that of a lower concentration.

Chemical Reaction Engineering (CRE) is the field that studies the rates and mechanisms of chemical reactions and the design of the reactors in which.

Reactor Theory: hydraulics

A First Course on Kinetics and Reaction Engineering

A First Course on Kinetics and Reaction Engineering

A First Course on Kinetics and Reaction Engineering

Mustafa Nasser, PhD, MSc, BSc Chemical Engineering

Theories of Mass Transfer

Steady-state Nonisothermal reactor Design Part I

Chemical Reaction Engineering

13. Reactor Engineering: Reactor Design

Presentation transcript:

Modelling Water Scrubbing Biogas Based Technology William Nock, Sonia Heaven, Charles Banks Faculty of Engineering and the Environment, University of Southampton Promotion of Biogas Upgrading and Bottling in India and European Union

Why do we need a model? Description of real life situations Tool to help design and operate a system Provide predictions on how a system will behave under different conditions “Everything should be made as simple as possible, but not simpler”- Albert Einstein

Promotion of Biogas Upgrading and Bottling in India and European Union Modelling Approach Equilibrium Based Models Rate Based Models 1D, 2D or 3D Steady state or dynamic model CFD Empirical design HETP and HTU/NTU

Promotion of Biogas Upgrading and Bottling in India and European Union Well mixed system with negligible directional concentration gradients Ideal Gas Law and ideal liquid flow Isothermal reactor Chemical reaction Which species should mass transfer consider Mass transfer liquid or gas side dominant? Modelling Assumptions

Promotion of Biogas Upgrading and Bottling in India and European Union Model Derivation L IN L OUT G OUT G IN Δz Q G, Z c G, Z Q G, Z+ΔZ c G, Z+ΔZ Q L, Z+ΔZ c L, Z+ΔZ Q L, Z c L, Z Q G, Z+ΔZ c G, Z+ΔZ c L, Z+ΔZ Q L, Z c L, Z

Promotion of Biogas Upgrading and Bottling in India and European Union Plug Flow Reactor Δz Q G, Z c G, Z Q L, Z+ΔZ Q G, Z+ΔZ c G, Z+ΔZ c L, Z+ΔZ Q L, Z c L, Z z+Δz z Accumulation = input – output – reaction

Promotion of Biogas Upgrading and Bottling in India and European Union Axial Dispersion Model Δz Q G, Z c G, Z Q L, Z+ΔZ Q G, Z+ΔZ c G, Z+ΔZ c L, Z+ΔZ Q L, Z c L, Z Accumulation = input – output – reaction

Promotion of Biogas Upgrading and Bottling in India and European Union Boundary Conditions Closed - Closed Open - Open

Promotion of Biogas Upgrading and Bottling in India and European Union Mass Transfer Theory Interface Bulk Gas Bulk Liquid Liquid Film Gas Film cGcG c Gi c Li cLcL

Promotion of Biogas Upgrading and Bottling in India and European Union Mass Transfer Theory cGcG Interface Bulk Gas (c G ) Bulk Liquid (c L ) Liquid Film Gas Film cLcL

Promotion of Biogas Upgrading and Bottling in India and European Union Empirical Correlations Henry’s Law Mass transfer coefficients Interfacial area Pressure drop Gas/ liquid holdup

Promotion of Biogas Upgrading and Bottling in India and European Union Finite Difference

Promotion of Biogas Upgrading and Bottling in India and European Union Finite Difference

Promotion of Biogas Upgrading and Bottling in India and European Union Summary Simple models often out perform more detailed models Assumptions need to be taken with care

Promotion of Biogas Upgrading and Bottling in India and European Union Thank you for listening