Fundamentals of Audio Production. Chapter 6. 1 Fundamentals of Audio Production Chapter Six: Recording, Storing, and Playback of Sound

Fundamentals of Audio Production. Chapter 6. 2 Mechanical storage The phonograph – cylinder recorder/player developed by Thomas Edison.

Fundamentals of Audio Production. Chapter 6. 3 Mechanical storage Gramophone – Emil Berliners disk-based mechanical recorder

Fundamentals of Audio Production. Chapter 6. 4 Mechanical storage Modern record cutting lathes use electromagnetic heads to convert audio current into physical vibrations The vibrating stylus is heated to easily cut a groove in the vinyl disk

Fundamentals of Audio Production. Chapter 6. 5 Mechanical storage

Fundamentals of Audio Production. Chapter 6. 6 Mechanical storage

Fundamentals of Audio Production. Chapter 6. 7 Mechanical storage Modern phonographs use electromagnetic transducers called cartridges Cartridges convert physical energy which is stored in the grooves of the recording into electrical energy The stylus follows the undulating groove Movements of the stylus, vibrate a small magnet/coil mechanism

Fundamentals of Audio Production. Chapter 6. 8 Mechanical storage

Fundamentals of Audio Production. Chapter 6. 9 Magnetic tape recording Magnetic recording heads are transducers that convert electrical energy into magnetic Recording heads are electromagnets Audio current creates an alternating magnetic field The magnetic field is focused at the gap in the record head

Fundamentals of Audio Production. Chapter Magnetic tape recording

Fundamentals of Audio Production. Chapter Magnetic tape recording The fluctuations in the magnetic field are stored on tape by re-arranging the magnetic polarity of the metal surface of the tape The tape surface is made from powdered metals, like FeO 2, or iron oxide (rust) The metals are attached to a plastic backing with binder (glue)

Fundamentals of Audio Production. Chapter Magnetic tape recording Playback heads are constructed in a nearly identical manner During playback, a current is induced to flow in the coil of the head by the magnetic charges of the tape surface

Fundamentals of Audio Production. Chapter Analog tape recording The paths on the tape where audio is recorded are called tracks The inputs on the recorder are called channels Stereo formats are two channel, but may be two or four tracks

Fundamentals of Audio Production. Chapter Analog tape recording

Fundamentals of Audio Production. Chapter Analog tape recording Tape width and track spacing affect cross talk between tracks Tape speed affects fidelity –Higher tape speeds produce greater signal-to- noise ratios –Higher tape speeds produce wider frequency responses

Fundamentals of Audio Production. Chapter Analog tape recording The Philips compact cassette and track configuration

Fundamentals of Audio Production. Chapter Analog tape recording Reel to reel

Fundamentals of Audio Production. Chapter Analog tape recording Reel to reel

Fundamentals of Audio Production. Chapter Analog tape recording Cartridges

Fundamentals of Audio Production. Chapter Analog tape recording Commonalities across tape platforms –Head arrangements Erase, record, reproduce –Capstan and pinch rollers pull the tape

Fundamentals of Audio Production. Chapter Analog tape recording

Fundamentals of Audio Production. Chapter Digital tape recording Digital audio tape stores binary data (on/off) represented by short bursts of electrical current Stationary head systems (DASH) use reel- to-reel tape transports DAT systems use helical scanning rotating head

Fundamentals of Audio Production. Chapter Digital tape recording

Fundamentals of Audio Production. Chapter Optical storage Electrical energy is converted into light energy by a LASER The LASER burns microscopic pits into the surface of a glass disk Binary data (on/off) triggers the LASER

Fundamentals of Audio Production. Chapter Optical storage

Fundamentals of Audio Production. Chapter Optical storage Compact disks are read by a LASER Light is refracted into a photoreceptor by bumps on the surface of the disk Each pulse of light is equal to an on state

Fundamentals of Audio Production. Chapter Optical storage

Fundamentals of Audio Production. Chapter Optical storage The pits made by the LASER are.5 microns wide and up to 3.5 microns in length How big is that?

Fundamentals of Audio Production. Chapter Solid state storage Flash memory is constructed from layers of layers of conductive and non-conductive materials The layers function as transistors Current is passed through the devices thousands of transistors If it passes through, it represents an on in binary code

Fundamentals of Audio Production. Chapter Solid state storage

Fundamentals of Audio Production. Chapter Solid state storage

Fundamentals of Audio Production. Chapter Discussion What are the relative advantages and disadvantages of –Mechanical –Magnetic –Optical –Solid state