SWEDISH EMERGENCY DISASTER EQUIPMENT PREPARATION & DONNING PPE

Personal Protective Suit

Step 1 - insert batteries

Step 2 - fit battery carrier to belt

Step 3 - connect lead to air breather

Step 4 - screw retaining nut fully home

Step 5 - remove protective cap from filter

Step 6 - fit filters to air breather

Step 7 - ensure braces are attached

Step 8 - roll outer legs up suit

Step 9 - don suit

Step 10 - roll outer legs down over protective boots

Step 11 - ensure suit is correctly fastened

Step 12 - put on belt & tighten

Step 13 - switch on breather unit. The unit will sound a warning

Step 14 - Put on hood

Step 15 - Place hood chin first

Step 16 - Connect air tube

Step 17 - Connect hood retaining straps under arm

Step 18 - Put on inner gloves

Step 19 - Roll up outer sleeve

Step 20 - Put on outer glove

Step 21 - Roll down outer sleeve over glove

Step 22 - Check each other front and back

Step 23 - Place tabard over suit