Sketching Multiview Drawings

Slides:



Advertisements
Similar presentations
Drafting – Product Design & Architecture
Advertisements

MECHANICAL DRAWING MULTIVIEW DRAWINGS.
Auxiliary Views – An Overview
Multi-View Sketching Washington Technology Magnet IED
Orthographic Drawings
Multiview Drawing A multiview drawing is one that shows two or more two-dimensional views of a three- dimensional object. Multiview drawings provide the.
Multiview Drawings. Multiview Drawing A multiview drawing is one that shows two or more two-dimensional views of a three- dimensional object. Multiview.
Multiview Sketching Multiview Sketching
Prepared by: Nor Helya Iman Kamaludin Prepared by: Nor Helya Iman Kamaludin Lecture 4: Multiple Views 1 PTT 105/3: Engineering Graphics.
Drawing Unit Orthographic Projection P. Hennessy
Multiview Drawings. Multiview Drawing A multiview drawing is one that shows two or more two-dimensional views of a three- dimensional object. Multiview.
Auxiliary Views.
Multi-View Sketching. Learning Objectives Understand using the ‘Glass Box’ to help define orthographic projections. Be able to define Multi-View Drawing,
Sketching Multiview Drawings
Introduction to PROJECTION. PROJECTION is defined as an image or a drawing of an object made on a plane.
Which is best Isometric view
9 Multiview Drawings Permission granted to reproduce for educational use only. © Goodheart-Willcox Co., Inc. Understand the principles of orthographic.
“One picture is worth a thousand words.”
Perspective Sketches Introduction to Engineering DesignTM
Orthographic Drawings
Multi-View Sketching Multi-View Sketching
“One picture is worth a thousand words.”
Forging new generations of engineers
Multiview Sketching Multiview Sketching
Multiview Sketching Multiview Sketching
Do Now Heading: Interpreting Graphs
Multiview Sketching Multiview Sketching
Forging new generations of engineers
Explain terms and procedures utilized in technical drafting
Perspective Sketching
Multi-View Sketching Multi-View Sketching
Forging new generations of engineers
Multi-View Sketching Multi-View Sketching
Projections Orthographic drawings – drawings where three views of an object are drawn in perpendicular planes to one another.
Multi-View Sketching STEM Foundations Multi-View Sketching
Sketching Practice “One picture is worth a thousand words.”
Multi-View Drawings.
Isometric and Oblique Pictorials
Multi-View Sketching Multi-View Sketching
Sketching Practice “One picture is worth a thousand words.”
Auxiliary Views.
Perspective Sketching
Sketching Practice “One picture is worth a thousand words.”
Line Conventions Introduction to Engineering DesignTM
Forging new generations of engineers
Forging new generations of engineers
Multi-View Sketching Multi-View Sketching
Multiview drawings.
Isometric Pictorials Isometric means equal measure.
Oblique Pictorials.
Isometric Pictorials Isometric Pictorials
Forging new generations of engineers
Perspective Sketches Perspective Sketches
Sketching Multiview Drawings
Forging new generations of engineers
Multi-View Sketching Multi-View Sketching
Multi-View Sketching Multi-View Sketching
Forging new generations of engineers
Multiview Sketching Multiview Sketching
Forging new generations of engineers
Forging new generations of engineers
Forging new generations of engineers
Sketching Practice “One picture is worth a thousand words.”
Perspective Sketches.
Sketching Multiview Drawings
Projections Orthographic drawings – drawings where three views of an object are drawn in perpendicular planes to one another.
Oblique Pictorials Oblique Pictorials
Perspective Sketches Introduction to Engineering DesignTM
Multi-View Sketching Multi-View Sketching
Forging new generations of engineers
Presentation transcript:

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Multiview Drawing A multiview drawing is one that shows two or more two-dimensional views of a three-dimensional object. Multiview drawings provide the shape description of an object. When combined with dimensions, multiview drawings serve as the main form of communication between designers and manufacturers. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Orthographic Projection Orthographic projection is a technique that is used to create multiview drawings. Orthographic projection is any projection of the features of an object onto an imaginary plane of projection. The projection of the features of the object is made by lines of sight that are perpendicular to the plane of projection. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Multiview Drawing Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Width, Depth, and Height All three-dimensional objects have width, height, and depth. Width is associated with an object’s side-to-side dimension. Height is the measure of an object from top-to-bottom. Depth is associated with front-to-back distance. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Width, Depth, and Height Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Orthographic Projection There is a total of six glass walls surrounding the object. Each wall represents a projection plane onto which a two- dimensional object view will be created. Tell Students: Notice the six glass walls that represent planes and six views can be projected from this view. Three views are typically used and they are top, front, and right side. The opposite of each view being bottom, back, and left side also exist. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Orthographic Projection The best way to understand orthographic projection is to imagine an object contained inside a glass box. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Width, Depth, and Height 45° Tell students: Notice how all views line up and construction lines can be used to help project the views from the first view drawn. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Projection Plane A projection plane, also referred to as a plane of projection or picture plane, is an imaginary surface that exists between the viewer and the object. The projection plane is the surface onto which a two-dimensional view of a three-dimensional object is projected and created. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Orthographic Projection Start by focusing only on the front projection plane. A person standing in front of the object would see only the five corners identified in black. 2 3 1 4 line of sight at 90° angle to projection plane 5 Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Orthographic Projection Projection lines are used to project each corner outward until they reach the projection plane. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Projection Lines A projection line is an imaginary line that is used to locate or project the corners, edges, and features of a three-dimensional object onto an imaginary two-dimensional surface. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Orthographic Projection The visible edges of the object are then identified on the projection plane by connecting the projected corners with object lines. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Orthographic Projection The orthographic projection process is then repeated on the other projection planes. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Sketching a Multiview Drawing Given the overall dimensions of the object, a pencil, and a sheet of graph paper, a sketching multiview drawing can be easily done using points, construction lines, and object lines. There are several ways to sketch a multiview drawing. Feel free to use the best way that make since to you. Teachers may choose to explain from the board or overhead using an example and have students follow along. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Sketching a Multiview Drawing Step #1: Calculate the amount of space that the views will take up. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Calculating Required Space 12 spaces Overall Multiview Sketch Height? Overall Multiview Sketch Width? 18 spaces Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Sketching a Multiview Drawing Step #1: Calculate the amount of space that the views will take up. Step #2: Layout the boxes within which the individual views will occur using points and construction lines. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Construction Line Layout Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Sketching a Multiview Drawing Step #1: Calculate the amount of space that the views will take up. Step #2: Layout the boxes within which the individual views will occur using points and construction lines. Step #3: Identify the visible edges by drawing object lines on top of the construction lines. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching Object Line Layout Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching A Question… Each of the blocks at right has the same overall dimensions and color. What else do they have in common? You could have students practice sketching the multiview drawings of these objects individually or in groups to help determine the answer before revealing it. Project Lead The Way, Inc. Copyright 2007

Sketching Multiview Drawings Introduction to Engineering DesignTM Unit 1 – Lesson 1.2 – Intro to Technical Sketching A Question… Each of the blocks at right has the same overall dimensions and color. What else do they have in common? They all have identical top views! Project Lead The Way, Inc. Copyright 2007