Competency: Draw roof plans

Slides:



Advertisements
Similar presentations
Unit 55 Roof Finish Roof Overhangs and Cornices • Open Cornices • Closed Cornices • Cornice Soffit Systems • Covering Roofs • Asphalt Shingles • Wood Shingles.
Advertisements

Roofs are one of a building’s primary elements and play a major part in giving a building its character. There are several different types of roof in.
Chapter 16 Roof Designs. Chapter 16 Roof Designs.
Roof Framing A Quick Primer
Ceilings & Basic Roofing
Carpentry Skilled Trades Ceiling and Roof Framing The most commonly used types of residential roof and ceiling construction are: Joist and Rafter.
What is Cornice?.
The Structure and Materials of Roofing. Roof structures Although, theorists tried, most roofs until the 20 th century involved a sloping pitch. 40˚ or.
Gable Roof BCGCA3007B.
Competency: Draw Wall Sections
Gable Roof BCGCA3007B.
© 2006 ITT Educational Services Inc. CD230 Architectural Design & Drafting: Unit 5 Slide 1 Unit 5 Roofs.
Frame and Cornice Construction Sequence. Top Plate Double Plate Wall Stud (top half) Corner Post Frame and Cornice Construction Sequence Walls & Partitions.
Unit 44 Ceiling Framing Ceiling Joists • Laying Out Ceiling Frames • Constructing Ceiling Frames • Attic Scuttles • Constructing Flat Roof Ceilings.
Basic Roof Types and Roof Theory
Residential Framing Prints Unit 14.
ROOF DESIGNS 1. TYPES OF ROOFS The roof greatly affects the overall appearance of a home. There are many standard styles from which to choose. Choose.
Competency: Draw roof plans
Roof Design.
Roof Framing Unit 33.
ROOF DESIGNS. TYPES OF ROOFS The roof greatly affects the overall appearance of a home. There are many standard styles from which to choose. Choose a.
EDT Cabin Design Project - Roofs1 Weekend Cabin Retreat Project Roofs Sacramento City College EDT 300 Kenneth Fitzpatrick, P.E.
Roofs ..
Gable Roof BCGCA3007B. Gable Roof Flush with no eaves Flush with raked eaves Boxed.
Gable, Gambrel, and Shed Roofs
© 2006 ITT Educational Services Inc. CD230 Architectural Design & Drafting: Unit 1 Slide 1 Unit 1 CADD Part III.
Competency: Draw roof plans
Copyright 2006 The National Association of Certified Home Inspectors
Residential Roofing Systems
Wall and Ceiling Construction Vocabulary
Roof Types, Components & Terminology
Chapter 22 Roof Plan Components.
Roof Connection Details
Flat Roofs & Introduction to Gable Roofs Ref: M. S. Martin / March 2004 / Reviewed & Combined March 2007.
Structural Components
Ceiling Framing Unit 32.
1 Building Types. 2 Building Use and Size Buildings are available in many types and sizes. Large, specialized buildings should be planned and built by.
Common Components of a Traditional Wood Framed Building
Roof and Ceiling Framing
Gable Roof BCGCA3007B.
ET 201 – Architectural Drafting Dr. Dan Trent September 28, 2015
Unit A3-9 Framing Agriculture Structures Problem Area 3 Construction Systems.
Choose a category. You will be given the answer. You must give the correct question. Click to begin.
Roof Types, Components & Terminology
Chapter 28 Structural Components of Framed Construction.
© Goodheart-Willcox Co., Inc. Permission granted to reproduce for educational use only 1 PowerPoint Presentation Publisher The Goodheart-Willcox Co., Inc.
APPLICATIONS OF TECHNOLOGY
Drafting 2 (Arch) Quiz Review #5
Drafting 2 (Arch) Quiz Review #4 Quiz Review. 1. What is the difference between a pier and column? Bearing capacity Soil impact Concrete block Reinforcing.
Pitched Roof By PATEL ANKITKUMAR H.
Structural Components
Framing Vocabulary Stud: upright beams in the framework of a building
APPLICATIONS OF TECHNOLOGY
Competency: Draw roof plans
Framing Agriculture Structures
12 Chapter Roof Framing. 12 Chapter Roof Framing.
Wood Frame Systems Civil Engineering and Architecture®
Competency: Draw Wall Sections
Competency: Draw roof plans
Gable Roof BCGCA3007B.
Competency: Draw wall sections and details.
Framing Agriculture Structures
Competency: Draw roof plans
Wood Structures Topic 6 Roof Framing Trusses
Competency: Draw roof plans
Roof Plan plan view drawing that shows the exterior roof lines of a structure.
Common Components of a Traditional Wood Framed Building
Competency: Draw roof plans
Competency: Draw Wall Sections
Competency: Draw roof plans
Presentation transcript:

Competency: 205.00 Draw roof plans Objective: 205.02 Apply concepts of roof construction.

Traditional Framed Roof (stick built) Rafter size depends upon The distance to be spanned The spacing of the rafters (typically 24” O.C.) The loads exerted on the roof from dead loads and live loads

Traditional Framed Roof (stick built) Common rafters rest on the double top plate and extend to the ridge Hip, valley, and jack rafters Hip rafters extend from the ridge to a wall corner in a hip roof. Valley rafters occur where two sloping roofs intersect forming a valley. Jack rafters extend from the double top plate to either a hip or valley rafter. Lengths vary as they occur higher on the roof Shorter than common rafters

Traditional Framed Roof (stick built) Collar beams Typically placed ever 2nd or 3rd set of rafters May serve as a ceiling joist for finished attics Knee walls Vertical studs that extend from the ceiling joists to the rafters. Reduces rafter span Adds rigidity May form wall in finished attic

Roof Slope Rise Run Vertical distance Measured from top of wall plate to underside of rafter Run Horizontal distance equal to half the clear building span

Roof Slope Span Roof pitch Horizontal distance between load bearing walls Roof pitch Ratio of actual rise to actual span Indicated by rise to run ratio Run always expressed as 12

Cornice/Eave Composed of all materials used to join roof to exterior sidewalls Roof overhang Protects walls and openings from weather Controls natural light entering structure

Cornice/Eave Types Open Cornice Box Cornice Exposed beam construction Rafter ends exposed Sometimes tapered or curved for appearance Box Cornice Fascia Forms eave line Projects below soffit to form drip edge Nailed to lookout

Cornice/Eave Types Box Cornice (cont’d) Soffit Material that covers bottom side of rafter tail Attached directly to bottom side of overhanging rafter Bottom of rafter tail may be cut perpendicular to soffit Nailing strip attached to sidewall serve as continuous nailing surface Wide overhangs require lookout perpendicular to wall

Cornice/Eave Types Gable end (Rake) Formed by extension of gable roof beyond end walls Overhangs constructed similar to other walls Lookouts attached to last rafters is less than 12” Fascia attached to lookout

Roof Trusses Prefabricated units include all members necessary to roof structure Less expensive than conventional framing Span long distances without interior load bearing walls or beams Allows for open plans Installed before interior wall construction

Roof Truss Assembly Top chord, bottom chord, and web members Joined with plywood or sheet metal gussets for light construction Available in many styles Fink (W) Howe (King post) Scissors Purlins (horizontal members) Perpendicular to trusses provide stability & nailing surface

Roof Ventilation Cools attic area during summer Removes moisture from attic Bathing, cooking, cleaning Condensation during winter

Roof Ventilation Prevents ice dams in winter conditions Melting snow refreezes at colder edges of roof Water behind ice dam soaks under shingles Ventilation regulates attic temperature

Roof Ventilation Methods Gable end vents Cupola Louvered Various shapes Cupola Small structure built above main roof level Louvered sides allow air movement

Roof Ventilation Ridge vents Soffit vents Projecting devices exhaust air from attic Turbine vents have moving parts Flat, non-mechanical vents allow airflow Soffit vents Allow air to enter attic Continuous strips or individual units Screen covers prevent insect and pest entrance