Towards an NMC lattice for PS2

Slides:



Advertisements
Similar presentations
Eric Prebys, FNAL.  So far, we’ve talked about nice, periodic lattice, but that may not be all that useful in the real world. In particular, we generally.
Advertisements

March A. Chancé, J. Payet DAPNIA/SACM / Beta-beam ECFA/BENE Workshop The Decay Ring -First Design- A. Chancé, J.Payet CEA/DSM/DAPNIA/SACM.
Operated by the Jefferson Science Associates for the U.S. Depart. Of Energy Thomas Jefferson National Accelerator Facility Alex Bogacz, Dogbone RLA – Design.
Eric Prebys, FNAL.  In our previous discussion, we implicitly assumed that the distribution of particles in phase space followed the ellipse defined.
Design of the Turnaround Loops for the Drive Beam Decelerators R. Apsimon, J. Esberg CERN, Switzerland.
KEKB lattice Taken from LATTICE DESIGN FOR KEKB COLLIDING RINGS By H. Koiso and K. Oide.
ILC Damping Ring Alternative Lattice Design ( Modified FODO ) ** Yi-Peng Sun *,1,2, Jie Gao 1, Zhi-Yu Guo 2 Wei-Shi Wan 3 1 Institute of High Energy Physics,
H. Bartosik, Y. Papaphilippou. PS2 meant as potential replacement of existing PS PS2 main characteristics given by LHC requirements – Circumference defined.
BEAM’07 summary PS2 October 5 th, 2007 CARE-HHH-APD BEAM’07 M. Benedikt.
The Introduction to CSNS Accelerators Oct. 5, 2010 Sheng Wang AP group, Accelerator Centre,IHEP, CAS.
Lattice design for CEPC main ring H. Geng, G. Xu, W. Chou, Y. Guo, N. Wang, Y. Peng, X. Cui, Y. Zhang, T. Yue, Z. Duan, Y. Wang, D. Wang, S. Bai, Q. Qin,
Hybrid Synchrotron Arc: 2 Dipoles per Half Cell J. Scott Berg Advanced Accelerator Group Meeting 28 July 2011.
Lattice design for FCC-ee Bastian Haerer (CERN BE-ABP-LAT, Karlsruhe Institute of Technology (KIT)) 1 8 th Gentner Day, 28 October 2015.
Present MEIC IR Design Status Vasiliy Morozov, Yaroslav Derbenev MEIC Detector and IR Design Mini-Workshop, October 31, 2011.
Parameter scan for the CLIC damping rings July 23rd, 2008 Y. Papaphilippou Thanks to H. Braun, M. Korostelev and D. Schulte.
Some words of Wisdom / Caution B. Holzer is allowed to spend 5 % of his (precious) time to act as consultant for the lattice design and beam optics of.
Hybrid Fast-Ramping Synchrotron to 750 GeV/c J. Scott Berg Brookhaven National Laboratory MAP Collaboration Meeting March 5, 2012.
Analysis of Garren’s 27-Jul-2011 Hybrid Synchrotron Lattice J. Scott Berg Brookhaven National Laboratory Advanced Accelerator Group Meeting February 2,
Optics considerations for PS2 October 4 th, 2007 CARE-HHH-APD BEAM’07 W. Bartmann, M. Benedikt, C. Carli, B. Goddard, S. Hancock, J.M. Jowett, A. Koschik,
Optics solutions for the PS2 ring February 11 th, 2008 LIS Section Meeting Y. Papaphilippou.
HF2014 Workshop, Beijing, China 9-12 October 2014 Challenges and Status of the FCC-ee lattice design Bastian Haerer Challenges.
Layout and Arcs lattice design A. Chancé, B. Dalena, J. Payet, CEA R. Alemany, B. Holzer, D. Schulte CERN.
Operated by the Jefferson Science Associates for the U.S. Depart. Of Energy Thomas Jefferson National Accelerator Facility Alex Bogacz, Acceleration in.
Third ILC Damping Rings R&D Mini-Workshop KEK, Tsukuba, Japan December 2007 Choosing the Baseline Lattice for the Engineering Design Phase Andy Wolski.
First evaluation of Dynamic Aperture at injection for FCC-hh
Optics considerations for PS2
Optimization of the Collider rings’ optics
Dispersion correction in the bypass dogleg
J-PARC main ring lattice An overview
NSLS-II Lattice Design Strategies Weiming Guo 07/10/08
ILC DR Lower Horizontal Emittance? -2
Large Booster and Collider Ring
Non-linear Beam Dynamics Studies for JLEIC Electron Collider Ring
CEPC pretzel scheme study
Non linear optimization of the CLIC pre-damping rings
First Look at Nonlinear Dynamics in the Electron Collider Ring
Multiturn extraction for PS2
PS2 design status Y. Papaphilippou LIS section meeting
Status of CEPC lattice design
DA study for CEPC Main Ring
Progress of SPPC lattice design
LHC (SSC) Byung Yunn CASA.
Superconducting Ultimate-Storage-Ring Design
ILC 3.2 km DR design based on FODO lattice (DMC3)
Collider Ring Optics & Related Issues
ILC 3.2 km DR design based on FODO lattice (DMC3)
Optics solutions for the PS2 ring
Negative Momentum Compaction lattice options for PS2
Comparison of NMC rings for PS2
SuperB Dynamic Aperture A. Bogomyagkov, E. Levichev, P
PS2 meeting NMC lattice for PS2 Y. Papaphilippou September 28th, 2007.
Towards an NMC Ring: Dispersion suppressor & long straight section
Optics considerations for PS2
Negative Momentum Compaction lattice options for PS2
Towards an NMC Ring: Dispersion suppressor & long straight section
Update on MEIC Nonlinear Dynamics Work
Update on MEIC Nonlinear Dynamics Work
Update on MEIC Nonlinear Dynamics Work
Ion Collider Ring Using Superferric Magnets
Alternative Ion Injector Design
Fanglei Lin, Yuri Nosochkov Vasiliy Morozov, Yuhong Zhang, Guohui Wei
Update on JLEIC Electron Ring Design
Fanglei Lin MEIC R&D Meeting, JLab, July 16, 2015
JLEIC Electron Ring Nonlinear Dynamics Work Plan
Upgrade on Compensation of Detector Solenoid effects
Fanglei Lin JLEIC R&D Meeting, August 4, 2016
Update on MEIC Nonlinear Dynamics Work
Update on the High Energy Booster Design
3.2 km FODO lattice for 10 Hz operation (DMC4)
Update for ion ring lattice chromaticity correction
Presentation transcript:

Towards an NMC lattice for PS2 PS2 meeting Towards an NMC lattice for PS2 Y. Papaphilippou August 22nd, 2007

PS2 Meeting, Y.Papaphilippou Original NMC arc Starting from the “high-filling” factor arc of Christian Phase advances of 280o,320o per module γt of 8.2i Four families of quads, with max. strength of 0.095m-2 Max. horizontal beta of 67m and vertical of 43m Min. dispersion of -6m and maximum of 4m Chromaticities of -1.96,-1.14 Total length of 96.2m Possibility to reduce further the transition energy by moving more bends towards areas of negative dispersion 22/08/2007 PS2 Meeting, Y.Papaphilippou

PS2 Meeting, Y.Papaphilippou An alternative NMC arc 1 FODO cell with 4 + 4 bends and an asymmetric low-beta triplet Phase advances of 320o,320o per module γt of 6.2i Five families of quads, with max. strength of 0.1m-2 Max. beta of 58m in both planes Min. dispersion of -8m and maximum of 6m Chromaticities of -1.6,-1.3 Total length of 90.56m Fifth quad family not entirely necessary Straight section in the middle can control γt 22/08/2007 PS2 Meeting, Y.Papaphilippou

PS2 Meeting, Y.Papaphilippou Other phase advances 320o, 280o with γt of -7.5 280o, 320o with γt of -10.4 Flexible phase advance tuning between 240o and 330o in both planes, but low phase advance solutions do not provide negative momentum compaction 22/08/2007 PS2 Meeting, Y.Papaphilippou

PS2 Meeting, Y.Papaphilippou Dispersion suppressor Two extra families of quadrupoles for setting dispersion to zero Matching not perfect (beta functions slightly large) but a good starting point 22/08/2007 PS2 Meeting, Y.Papaphilippou

PS2 Meeting, Y.Papaphilippou Remarks Total arc length of 560 meters, letting 225m of straight sections To be done Dispersion suppressor refinement Matching to the straight section Module length optimisation Minimise quadrupole families number Systematic phase advance scanning Working point matching Chromaticity correction Dynamic aperture evaluation 22/08/2007 PS2 Meeting, Y.Papaphilippou