OBLIQUE VIEW 1 Down 205 In 50 Down 205 In 200

Slides:



Advertisements
Similar presentations
Fundamentals of Engineering
Advertisements

Working Drawing Concepts
Drafting – Product Design & Architecture
Sketching & Dimensioning
Technical Sketching and Drawing
The Gordon Schools Graphic Communication
Perspective Sketching
Module 6: Sectional Views
Module 4: Isometric Drawing
Perspective Sketching
Each 1 cm square = 20 cm What scale is this plan drawn to? Select the correct answer from the options below. Scale Drawings 1 : : 1.
Isometric and Oblique Pictorials
Orthographic Projection
From Isometric Drawings to Plans and Elevations
Descriptive Geometry:
USE A SHEET OF LINED PAPER AND FOLLOW THE INSTRUCTIONS PLEASE NOTE: We are using lined paper to make the drawings easier for you. 1.DRAW A HORIZONTAL.
JSS3 BASIC TECHNOLOGY SCHEME OF WORK FOR FIRST TERM 2014/15 WEEK TOPIC
© T Madas. A shape has rotational symmetry, if it looks the same in more than one position, when rotated about its centre. We say it has a rotational.
1 Planning a Drawing Drawings can be drawn as a series of flat views called Orthographic Projection or in a form that resembles the actual appearance called.
Orthographic, Oblique & Isometric Projections
Aberdeen Grammar School Isometric Views. Isometric Drawings Lengths and breadths are drawn at 30° to the horizontal. Heights are drawn vertically. All.
ENTC 1110 OBLIQUE PICTORIALS.
Technical Graphic Communication
MATH 306 Chapter 1.
Design and Communication Graphics
Career & Technical Education Sketching 2.00 Explain and demonstrate basic sketching skills and techniques.
Career & Technical Education Sketching 2.00 Explain and demonstrate basic sketching skills and techniques.
IOT POLY ENGINEERING 2-16 January 26, 2010 Matching and Fill-in-the-Blank Identifying drawing types –Isometric, section, standard view, development, perspective,
Two-Point Perspective Sketching
Multiplication Squares Unit 3 Activity 2. Multiplication Squares Resource Sheet
Perspective Sketching. Perspective Drawings A perspective drawing offers the most realistic three-dimensional view of all the pictorial methods, because.
Unit 6 Pictorial Drawings  Recognize pictorial drawings  Sketch isometric & oblique drawings  Identify the difference between cavalier oblique &
NAME: ST FINTINANS LONGWOOD
1 Point Perspective.  1 point perspective drawings are a type of pictorial drawing.  They are a realistic drawing of an object showing it as if it were.
Design and technology st aidan’s high A pictorial sketch of a wall lamp is shown. The shade is in the form of a cut cone. Draw, from the given.
Career & Technical Education Sketching Explain and demonstrate basic sketching skills and techniques.
NAME: DATE: DEVELOPMENTS POSTERS.
Oblique Projections Oblique Projections.
45 POLYGONS DATE: TRIANGLE SQUARE PENTAGON HEXAGON OCTAGON PENTAGON METHOD 2 Down 95 In 35 Down 95 In 35 Down 95 In 45 Down 105 In 43 Down 105 In 50 Down.
60 Find the start point.. Draw a construction line horizontally across the page. 60.
Isometric Views.  Lengths and breadths are drawn at 30° to the horizontal.  Heights are drawn vertically.  All sizes are drawn to their exact sizes.
Greenfaulds High School Oblique Views. Oblique views are a type of pictorial view. They show an object from the front with all depths at an angle of 45°.
Oblique Pictorials Get out your notebooks. 2.1 Oblique Pictorials.
Graphic st aidans high OBLIQUE VIEWS.
Pictorial Drawing Isometric.
Unit 16 Engineering Drawing
Isometric and Oblique Pictorials
Teacher's Notes Topic: Pythagoras Perimeters
Graphic Communication
Multi-view & pictorial sketching concepts
Task 9 Describe the types of drawings that may be produced by the modelling software.
Before you begin… Make sure the isometric paper is the right way round (landscape). Check you have a ruler. Sharpen your pencil. Choose three coloured.
ISOMETRIC VIEW QUESTIONS 1
ORTHOGRAPHIC PROJECTION 11
Introduction to Oblique
Views And Techniques Interpreting Drawings is one section of theory which will be tested in your final exams. The slides contain the following information.
Sketching & Dimensioning
ORTHOGRAPHIC PROJECTION 1
Axonometric drawings BDU
Isometric and Oblique Pictorials
Views and Perspectives
ISOMETRIC CIRCLES AND CYLINDERS
Before you begin… Make sure the isometric paper is the right way round (landscape). Check you have a ruler. Sharpen your pencil. Choose three coloured.
Areas of Composite Shapes
Pictorial/Orthographic
Geometry Three Dimensions
LOTTO LOGO Down 200 In 55 SHEET NO: 4.
Plan & Elevations Thursday, 30 May 2019.
Interpretation of Drawings
Presentation transcript:

OBLIQUE VIEW 1 Down 205 In 50 Down 205 In 200 NAME: ST FINTINANS LONGWOOD DATE: A pictorial drawing gives an overall impression of what an object looks like. In oblique drawing the front face of the object is drawn full size. Receding lines are drawn at 45° to the horizontal. The elevation and plan of a letter F are shown. Draw and Oblique view of the letter 20 20 40 20 140 20 20 120 60 20 20 20 15 15 45° 45° 20 40 40 20 20 20 20 20 20 20 20 100 160 Down 205 In 50 Down 205 In 200 SHEET NO: 50

OBLIQUE VIEW 2 NAME: ST FINTINANS LONGWOOD DATE: A pictorial drawing gives an overall impression of what an object looks like. In oblique drawing the front face of the object is drawn full size. Receding lines are drawn at 45° to the horizontal. The figure below shows the elevation and plan of a logo for Eldon Transport Limited. Draw an Oblique view of the logo. 15 30 120 15 30 15 15 45° 15 40 15 30 45 15 45 30 15 60 315 Down 190 In 35 SHEET NO: 51

OBLIQUE VIEW 3 Down 200 In 130 Grid is made up of 10mm squares. NAME: ST FINTINANS LONGWOOD DATE: A pictorial drawing gives an overall impression of what an object looks like. In oblique drawing the front face of the object is drawn full size. Receding lines are drawn at 45° to the horizontal. The figure below shows the elevation and plan of a Robots Face. Draw an Oblique view of the face. 130 20 45° Grid is made up of 10mm squares. 120 Down 200 In 130 SHEET NO: 52

OBLIQUE VIEW 4 Down 200 In 130 Grid is made up of 10mm squares. NAME: ST FINTINANS LONGWOOD DATE: A pictorial drawing gives an overall impression of what an object looks like. In oblique drawing the front face of the object is drawn full size. Receding lines are drawn at 45° to the horizontal. The figure below is to be used as a Parking Sign. Draw an Oblique view of the Sign. 110 10 80 40 100 Grid is made up of 10mm squares. 220 Down 200 In 130 SHEET NO: 53