How could you Find the Failed Torque Converter of your Car?

The torque converter of your car is a pump that contains a bunch of blade like a spin which is a propeller in sync with the engine crankshaft.

It can control the flow of fluid from the transmission onto the blades of the impeller and those blades attached to the input shaft of the transmission.

The speed and gear of your car are determined by the hydraulic pressure generated inside the transmission through the process.

When the torque converter becomes failed, the car engine will require more revolutions that will decrease the transmission fluid pressure and fuel economy.

Here are the signs that help you to find the failed torque converter of your car.

Shifting problems

The delayed or the soft shifts of your car are the common signs of the lowered pressure output of the torque converter.

Instead of a nice and crisp transmission shifting, you will feel a rough shifting means the shifting won't engage the way it supposed to be.

For increasing the torque converter output pressure, the best way to assist the transmission of your car is by shifting the gears properly.

Transmission slippage

When the torque converter of your car is failed, then it won't be able to manage the fluid properly.

You will either find too much or very low fluid flow into the transmission can cause the gears to become slippery and result to the decrease in acceleration.

Due to the transmission slippage the fuel economy of your car also decrease. So you first need to inspect the fluid, when you notice the slippage.

High speed shaking

When you drive your car at the speed of 30mph to 45 mph, it will begin to shake due to the issues in the torque converter.

You will easily notice the high speed shaking issues of your car when you are moving it over a bumpy road.

The act of shaking will suddenly occur in car without any warning. So, inspect your transmission by a professional when you experience the shaking.

Strange noises

When the torque converter of your car got damaged, there are many different kinds of noises are occur.

The whining noise can indicate that the power steering pump has a little fluid. When the starter mechanism goes bad, a rattling noise can be heard.

When you put the transmission into gears, the frequency and the volume of rattling noise will increase that may create trouble in the converter.

Speed problems

When the output of the torque converter is not consistent, then it can increase and decrease the speed of the car in the transmission.

As a result, the throttle won't have the concurrent changes because it will be varying in hydraulic pressure.

Driving the car in this circumstance can be dangerous, so, it's good to inspect the transmission mounts or tighten them before inspecting the torque converter.

Conclusion

If you find any of the signs in the torque converter mentioned above, then make sure that it has some problem.

So, consult with an auto mechanic or an auto expert to inspect it completely before taking any decision to repair or replace it.

Plus/ hl=en-US