L.E. COLLEGE MORBI ENGINEERING THERMODYNAMICS PREPARED BY :- Vishal Basiya [120310115013] Karan Makwana[120310115029] GUIDED BY:- S.B. PADALIYA

Surroundings System The First Law of Thermodynamics Energy exists in many forms, such as mechanical energy, heat, light, chemical energy, and electrical energy. Energy is the ability to bring about change or to do work. Thermodynamics is the study of energy. The system can exchange mass and energy through the boundary with the environment. An example of “closed system” - no mass flow- is the gas confined in a cylinder. The boundary –in this case real wall- is made by the cylinder and the piston walls. Surroundings System The boundary of the system is arbitrarily chosen

First Law of Thermodynamics → Conservation of Energy: The First Law of Thermodynamics First Law of Thermodynamics → Conservation of Energy: Energy can be changed from one form to another, but it cannot be created or destroyed. The total amount of energy and matter in the Universe remains constant, merely changing from one form to another. The First Law of Thermodynamics (Conservation) states that energy is always conserved, it cannot be created or destroyed. In essence, energy can be converted from one form into another. The energy balance of a system –as a consequence of FLT- is a powerful tool to analyze the exchanges of energy between the system and its environment. We need to define the concept of internal energy of the system, Eint as an energy stored in the system. Warning: It is not correct to say that a system has a large amount of heat or a great amount of work http://www.emc.maricopa.edu/faculty/farabee/BIOBK/BioBookEner1.html

The First Law of Thermodynamics. Heat, Work and Internal Energy Joule’s Experiment and the First Law of Thermodynamics. Equivalence between work and heat 1 calorie = 4.184 Joules Work is done on water. The energy is transferred to the water – i. e. the system- . The energy transferred appears as an increase in temperature. We can replace the insulating walls by conducting walls. We can transfer heat through the walls to the system to produce the same increase in temperature. The increase in temperature of the system is a consequence of an increase in Internal Energy. Internal energy is a state function of the system Schematic diagram for Joule´s experiment. Insulating walls are necessary to prevent heat transfer from the enclosed water to the surroundings. As the weights fall at constant speed, they turn a paddle wheel, which does work on water. If friction in mechanism is negligible, the work done by the paddle wheel on the water equals the change of potential energy of the weights. The sum of the heat transferred into the system and the work done on the system equals the change in the internal energy of the system

The First Law of Thermodynamics Another method of doing work. Electrical work is done on the system by the generator, which is driven by the falling weight.

The state of the gas will be described by the Ideal Gas Law. The First Law of Thermodynamics. Application to a particular case: A gas confined in a cylinder with a movable piston The state of the gas will be described by the Ideal Gas Law. How does the confined gas exchange energy (heat and work) with the surroundings?. How can we calculate the energy –heat and/or work- transferred, added or subtracted, to the system? What is the value of the internal energy for the gas in the cylinder? First Law “Quasi static processes”: a type of process where the gas moves through a series of equilibrium states. Then, we can apply the Ideal Gas Law. In practice, if we move the piston slowly, it will be possible to approximate quasi-static processes fairly well.

Rn – H – λET – G – D - Ph = ΔEint First Law of Thermodynamics. Fluxes of energy and mass on the earth surface. Energy balance. H λET CO2 Rn = Rns + Rnl D G ΔE Ph Energy fluxes: Rn : Net gain of heat energy from radiation λET Latent heat, Energy associated to the flux of water vapor leaving from the system H Sensible Heat. G Heat energy by conduction to the soil Ph: Net photosynthesis ΔEint: Change of the internal energy of the system D: Advection Net fluxes of mass Water vapor Carbon –CO2 Energy balance (applying First Law): Rn – H – λET – G – D - Ph = ΔEint

What is the value of the internal energy for the gas in the cylinder? The First Law of Thermodynamics. Application to a particular case: A gas confined in a cylinder with a movable piston Internal Energy for an Ideal Gas. It only depends on the temperature of the gas, and not on its volume nor its pressure What is the value of the internal energy for the gas in the cylinder? Experiment: Free expansion. For a gas at low density – an ideal gas-, a free expansion does not change the temperature of the gas. If heat is added at constant volume, no work is done, so the heat added equals to the increase in thermal energy Internal Energy is a state function, i.e. it is not dependent on the process, it only depends of the initial and final temperature

Heat transferred to a system The First Law of Thermodynamics. Application to a particular case: A gas confined in a cylinder with a movable piston Heat transferred to a system If heat is added at constant pressure the heat energy transferred will be used to expand the substance and to increase the internal energy. If the substance expands, it does work on its surroundings. Applying the First Law of Thermodynamics If heat is added at constant volume, no work is done, so the heat added equals the increase in thermal energy The expansion is usually negligible for solids and liquids, so for them CP ~ CV.

Heat transferred to a system. A summary The First Law of Thermodynamics. Application to a particular case: A gas confined in a cylinder with a movable piston Heat transferred to a system. A summary Heat energy can be added to (or lost from) the system. The value of the heat energy transferred depends on the process. Typical processes are - At constant volume - At constant pressure For the case of ideal gas Relationship of Mayer From the Kinetic theory, for monoatomic gases for biatomic gases Ideal Gas For solids and liquids, as the expansion at constant pressure is usually negligible CP ~ CV. Adiabatic: A process in which no heat flows into or out of a system is called an adiabatic process. Such a process can occur when the system is extremely well insulated or when the process happens very quickly.

The First Law of Thermodynamics The First Law of Thermodynamics. Application to a particular case: A gas confined in a cylinder with a movable piston Work done on the system, Won , is the energy transferred as work to the system. When this energy is added to the system its value will be positive. The work done on the gas in an expansion is P- V diagrams Constant pressure If 5 L of an ideal gas at a pressure of 2 atm is cooled so that it contracts at constant pressure until its volume is 3 L what is the work done on the gas? [405.2 J]

P- V diagrams Isothermal The First Law of Thermodynamics. P-V diagrams P- V diagrams Isothermal Conecting an initial state and a final state by three paths Constant pressure Constant Volume Constant Temperature

Adiabatic Processes. No heat flows into or out of the system The First Law of Thermodynamics. Processes. P-V Diagrams Adiabatic Processes. No heat flows into or out of the system

Adiabatic Processes. No heat flows into or out of the system The First Law of Thermodynamics. Processes. P-V Diagrams Adiabatic Processes. No heat flows into or out of the system The equation of curve describing the adiabatic process is We can use the ideal gas to rewrite the work done on the gas in an adiabatic process in the form A quantity of air is compressed adiabatically and quasi-statically from an initial pressure of 1 atm and a volume of 4 L at temperature of 20ºC to half its original volume. Find (a) the final pressure, (b) the final temperature and (c) the work done on the gas. cP = 29.19 J/(mol•K); cV = 20.85 J/(mol•K). M=28.84 g