Parul Institute of Engineering & Technology

Slides:



Advertisements
Similar presentations
P-N JUNCTION.
Advertisements

ELECTRICAL CONDUCTIVITY
ECE G201: Introductory Material Goal: to give you a quick, intuitive concept of how semiconductors, diodes, BJTs and MOSFETs work –as a review of electronics.
Electronic Devices Eighth Edition Floyd Chapter 1.
C H A P T E R 03 Semiconductors
MALVINO Electronic PRINCIPLES SIXTH EDITION.
Introduction to electronics (Syllabus)
Electronics.
Conduction in Metals Atoms form a crystal Atoms are in close proximity to each other Outer, loosely-bound valence electron are not associated with any.
S. RossEECS 40 Spring 2003 Lecture 13 SEMICONDUCTORS: CHEMICAL STRUCTURE Start with a silicon substrate. Silicon has 4 valence electrons, and therefore.
Semiconductor Basics Chapter 1. Atomic Structure Elements are made of atoms – 110 Elements; each has an atomic structure – Today, quarks and leptons,
Department of Information Engineering256 Semiconductor Conduction is possible only if the electrons are free to move –But electrons are bound to their.
Semiconductors and Diodes
9/24/2004EE 42 fall 2004 lecture 111 Lecture #11 Metals, insulators and Semiconductors, Diodes Reading: Malvino chapter 2 (semiconductors)
P and n type semiconductors. Semiconductors Semiconductors are also referred to as metalloids. Metalloids occur at the division between metals and non-metals.
The Devices: Diode Once Again. Si Atomic Structure First Energy Level: 2 Second Energy Level: 8 Third Energy Level: 4 Electron Configuration:
WEEK ONE TOPIC: ELECTRONICS SOLID STATE MATERIALS  CONDUCTORS  INSULATORS  SEMICONDUCTORS.
The Devices: Diode.
EMT112 CHAPTER 1 Introduction to Semiconductor By En. Rosemizi B
Introduction To Semiconductors
Dr. N.M. Safri/SEU3003_SemiconductorMaterial1 SEU 3003 ELEKTRONIK (ELECTRONICS) Chapter 1 SEMICONDUCTORS MATERIALS Dr. Norlaili Mat Safri.
Electronics 1 Lecture 2 Ahsan Khawaja Lecturer Room 102 Department of Electrical Engineering.
CHAPTER 1 Introduction To Diodes. OBJECTIVES Describe and Analyze: Function of Diodes Some Physics of Diodes Diode Models.
Presentation on: ELECTROMAGNETISM Topic: SEMICONDUCTORS Presented to: SIR.TARIQ BHATTI Program: BsIT-3rd Department of Computer Science.
EE201 SEMICONDUCTOR DEVICES
29P Electron Isolated copper Atom Conductor Valence orbit has only one Electron and is loosely bound to core Core.
ELECTRONIC PROPERTIES OF MATTER - Semi-conductors and the p-n junction -
Band Theory of Solids In isolated atoms the electrons are arranged in energy levels.
Conductors – many electrons free to move
AELE237Semiconductor Materials1 Semiconductor Materials and pn Junctions T. Floyd, “Electronic Devices”, Maxwell Macmillan International Editions, Chapter.
Basic Electronics CHAPTER 1 LECTURE 1 & 2 ENGR. KASHIF SHAHZAD.
Introduction to Semiconductors
Many solids conduct electricity
By Squadron Leader Zahid Mir CS&IT Department, Superior University PHY-BE -04 PN Junction.
Semiconductors. O A Semiconductor is a material whose resistivity is between that of a good conductor and a good insulator. O Examples of materials which.
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. MALVINO & BATES SEVENTH EDITION Electronic PRINCIPLES.
Best 3 Applications Involving in Zener Diode Working Functionality.
ELECTONICS & COMMUNICATION SEM-3 YEAR SUBJECT-ELECTCTRONICS DEVICE &CIRCUIT SUBJECT CODE ACTIVE LEARING ASSIGNMENT.
INTRODUCTION TO SEMICONDUCTORS
P-N JUNCTION DIODE Prepared By: Guided By: Ritisha Bhatt.
COURSE NAME: SEMICONDUCTORS Course Code: PHYS 473.
Semi Conductors Between conductors and insulators are materials, which allow an electric current to flow only under certain circumstances. These are called.
Electronic Circuits Autumn-2016.
PN JUNCTION Sri. S. L. Kulkarni Associate Professor & Head
SILVER OAK COLLEGE OF ENGENRRING & TECHNOLOGY
(16EC401) ELECTRONIC DEVICES AND CIRCUITS
Electronic Circuits Autumn-2013.
Electrical conductivity Energy bands in solids
BSIC SEMICOCONDUCTOR CONCEPTS INTRINSIC SILICON:
SEMICONDUCTORS.
Semiconductor Devices
Introduction to Semiconductors
Semiconductors. Silicon crystal Types of semiconductors
Introduction to Semiconductor Material and Devices.
Diodes and Diode Applications
Electronics Fundamentals
Microelectronic Circuits, Seventh Edition
CHAPTER 1 Semiconductors
Band theory.
Chapter 3. PN Junctions and Related Devices
Electronic Devices & Circuits
Semiconductors Chapter 25.
Chapter 1 – Semiconductor Devices – Part 2
Electronic Fundamental Muhammad Zahid
Recall-Lecture 6 Diode AC equivalent circuit – small signal analysis
BSIC SEMICOCONDUCTOR CONCEPTS INTRINSIC SILICON:
SEMICONDUCTOR MATERIALS
Semiconductor Physics
PN-JUNCTION.
Ashutosh Barua ECE - ASET
Presentation transcript:

Parul Institute of Engineering & Technology Subject Code : 2131006 Name Of Subject : Electronics Devices & Circuits Name of Unit : Semiconductors

Contents Conductors, Semiconductors Silicon crystals , Intrinsic semiconductors Two types of flow Doping a semiconductor Two types of extrinsic semiconductors The unbiased diode Forward bias, Reverse bias, Breakdown Energy levels, The energy hill Barrier potential and temperature Reverse-biased diode

Conductor A material that allows current to flow Examples: copper, silver, gold The best conductors have one valence electron

Atomic Structure of Copper

Core Nucleus and inner orbits Valence or outer orbit controls electrical properties Core of copper atom has net charge of + 1

Core of Copper

Free Electron The attraction between core and valence electron is weak An outside force easily dislodges a free electron from an atom

Semiconductor An element with electrical properties between those of a conductor and those of an insulator.

Semiconductor Examples Semiconductors typically have 4 valence electrons Germanium Silicon

Core diagrams for copper and silicon: One valence electron Four valence electrons Copper Silicon +1 +4 The nucleus plus the inner electron orbits

Silicon atoms in a crystal share electrons. Valence saturation: n = 8 Because the valence electrons are bound, a silicon crystal at room temperature is almost a perfect insulator.

Inside a silicon crystal Some free electrons and holes are created by thermal energy. Other free electrons and holes are recombining. Recombination varies from a few nanoseconds to several microseconds. The time between creation and recombination of a free electron and a hole is called the life time.

Silicon crystals are doped to provide permanent carriers. Free electron Hole (n type) (p type) Pentavalent dopant Trivalent dopant

Intrinsic Semiconductor A pure semiconductor A silicon crystal is intrinsic if every atom in the crystal is a silicon atom Two types of current flow: electrons and holes

Doping Adding impurity atoms to an intrinsic crystal to alter its electrical conductivity A doped semiconductor is called an extrinsic semiconductor

This crystal has been doped with a pentavalent impurity. The free electrons in n type silicon support the flow of current.

This crystal has been doped with a trivalent impurity. The holes in p type silicon support the flow of current. Note that hole current is opposite in direction to electron current.

Semiconductors in Summary The most popular material is silicon. Pure crystals are intrinsic semiconductors. Doped crystals are extrinsic semiconductors. Crystals are doped to be n type or p type. An n type semiconductor will have a few minority carriers (holes). A p type semiconductor will have a few minority carriers (electrons).

A semiconductor can be doped to have an excess of free electrons or holes The two types of doped semiconductors are n type and p type

P N Doping a crystal with both types of impurities forms a pn junction diode. P N Junction Negative ion Positive Some electrons will cross the junction and fill holes. A pair of ions is created each time this happens. As this ion charge builds up, it prevents further charge migration across the junction.

The pn barrier potential Electron diffusion creates ion pairs called dipoles. Each dipole has an associated electric field. The junction goes into equilibrium when the barrier potential prevents further diffusion. At 25 degrees C, the barrier potential for a silicon pn junction is about 0.7 volts.

P N Each electron that migrates across the junction and fills a hole effectively eliminates both as current carriers. P N Depletion layer This results in a region at the junction that is depleted of carriers and acts as an insulator.

Forward bias If the applied voltage is greater than The carriers move toward the junction and collapse the depletion layer. If the applied voltage is greater than the barrier potential, the diode conducts.

Reverse bias The depletion layer is reestablished The carriers move away from the junction. The depletion layer is reestablished and the diode is off.

Diode bias Silicon diodes turn on with a forward bias of approximately 0.7 volts. With reverse bias, the depletion layer grows wider and the diode is off. A small minority carrier current exists with reverse bias. The reverse flow due to thermal carriers is called the saturation current.

Diode breakdown Diodes cannot withstand extreme values of reverse bias. At high reverse bias, a carrier avalanche will result due to rapid motion of the minority carriers. Typical breakdown ratings range from 50 volts to 1000 volts.

Energy levels Extra energy is needed to lift an electron into a higher orbit. Electrons farther from the nucleus have higher potential energy. When an electron falls to a lower orbit, it loses energy in the form of heat, light, and other radiation. An LED is an example where some of the potential energy is converted to light.

Energy Hill Barrier potential of a diode Electrons need sufficient energy to cross the junction An external voltage source that forward biases the diode provides energy

The p side of a pn junction has trivalent atoms with a core charge of +3. This core attracts electrons less than a +5 core. Abrupt junction Conduction band Energy Valence band P-side N-side In an abrupt junction, the p side bands are at a slightly higher energy level. Real diodes have a gradual change from one material to the other. The abrupt junction is conceptual.

Energy bands after the depletion layer has formed Conduction band Energy Energy hill Valence band P-side N-side To an electron trying to diffuse across the junction, the path it must travel looks like an energy hill. It must receive the extra energy from an outside source.

Junction temperature The junction temperature is the temperature inside the diode, right at the pn junction. When a diode is conducting, its junction temperature is higher than the ambient. There is less barrier potential at elevated junction temperatures. The barrier potential decreases by 2 mV for each degree Celsius rise.

Reverse diode currents Transient current occurs when reverse voltage changes. IS, the saturation or minority-carrier current, doubles for each 10 degree Celsius rise in temperature. It is not proportional to reverse voltage. The surface of a crystal does not have complete covalent bonds. The holes that result produce a surface-leakage current that is directly proportional to reverse voltage.