Atoll Solutions PVT LTD www.atollsolutions.com
Atoll Solutions PVT LTD ATOLL BLUE BEE Atoll Solutions PVT LTD
INTRODUCTION TO BLUETOOTH LOW ENERGY Atoll Solutions PVT LTD INTRODUCTION TO BLUETOOTH LOW ENERGY
Light-weight subset of classic Bluetooth Introduced as a part of Bluetooth 4.0 core specification Ultra-low peak, average and idle mode power consumption Ability to run for years on a coin-cell batteries Low cost Communicate easily with modern mobile platforms Atoll Solutions PVT LTD
BLE Architecture Atoll Solutions PVT LTD
ATOLL Blue Bee Evaluation Board Atoll Solutions PVT LTD
nRF52 based evaluation board Used certified module from Raytac Corporation(MDBT42Q) All GPIOs are available for development Multiple programming options Small size Can be powered using coin cell battery NFC support Targeted @ customers looking build product using nRF52 Atoll Solutions PVT LTD
Atoll Solutions PVT LTD
MDBT42Q MODULE BT 4.0, BT 4.1 and BT 4.2 stack module(also support BT 5.0) Based nRF52832 SoC solution GPIO,SPI,UART,I2C,I2S,PWM and ADC Dual transmission mode – BLE and other 2.4Ghz Compact size with16x10x2.2 mm FCC and CE certified Fully coverage of software stack Atoll Solutions PVT LTD
Features Multi-protocol 2.4GHz radio 32-bit ARM Cortex-M4F processor 512kb FLASH and 64kb RAM Application development independent from protocol stack Programmable output power from +4dBm to -20dBm Flexible and configurable 32 pin GPIOs Low power 32MHz crystal and RC oscillators Wide supply voltage range from 1.7v to 3.6v. On-chip DC/DC buck convertor. Individual power management for all peripherals. NFC tag interface for OOB pairing. Atoll Solutions PVT LTD
Applications Home automation Sensor networks Building automation Personal Area Network Health/fitness sensor and monitor device Medical devices Beacons HID interfaces Remote controller Proximity applications Atoll Solutions PVT LTD
PROGRAMMING BLUEBEE Using debug out port nRF51and nRF52 DK board Atoll Solutions PVT LTD
PROGRAMMING BLUEBEE Using STLink-V2 Atoll Solutions PVT LTD
PROGRAMMING BLUEBEE Using Serial boot loader(UART) DFU This is an optional method Works with nRFgo Studio software from Nordic semiconductors Atoll Solutions PVT LTD DFU Can be used during development Mainly used for giving updates and bug fixes
SDK Provide rich and well tested software development Plenty of examples for play around Qualified Bluetooth smart services and profiles Support BLE,ANT and 2.4GHz proprietary protocols Drivers, libraries, example for peripherals Softdevices Project file for Keil ,GCC and IAR Secure signed DFU NFC libraries Atoll Solutions PVT LTD
Demo Application Programming heart rate monitor example Pedometer BLUEBEE + MMA8452Q(3 axis accelerometer) Atoll Solutions PVT LTD
ATOLL MODEL OF WORKING Customers can use EVB for start their product ideas Atoll will give support for hardware firmware and software Atoll will also help to make customized board depend on the customers need. Atoll Solutions PVT LTD
THANK YOU for more information contact : info@atollsolutions.com Atoll Solutions PVT LTD