FCC DIGITAL 1ch VIDEO&1ch AUDIO LINK PRODUCT SPECIFICATION EL – VA2202 TX / RX LINK VIDEO AUDIO 1 1 FCC DESCRIPTION This product is to transmit 1Ch Image, 1Ch Audio , signals through 1core, combining the system according to the need. It is generally called MUX equipment. There are a lot of types by way of combination. It can be manufactured according to the site and customer requests except for the described products. It is the method using optical characteristics, capable of no-relay long-distance transmission, and getting no influence from electric field and magnetic field. Having input and output display LED, it shows the data communication state visually. 7SegmentLED window on the front panel of the equipment shows image signal input and output voltage and optical cable cut. This Equipment is used C.W.D.M(Coarse Wavelength Division Multiplex). APPLICATION .CCTV, ITV and traffic control System .CATV System .Security System .Process control and monitoring System FEATURES . 10-Bit high quality Digitally Encoded Video Transmission . Transmission Distances up to 190 Km . NTSC/PAL/SECAM compatible . 600 Ohms unbalanced digital audio -. Image Signal Level Display & Built-in Optical Cable Cut Display Function -. Multiple Use of AC 110V / 220V -. Built-in LED to display image input and output voltage display per channel -. ECP Performance Certification, Electromagnetic Waves, K Mark, Venture Business, INNOBIZ, GS, CE Certification ORDERING INFORMATION PART NUMBER DESCRIPTION OPTICAL PWR BUDGET MAX DISTANCE EL-VA2202 TX 1ch V Transmitter / 1ch A Transmitter / EL-VA2202 RX 1ch V Receiver / 1ch A Receiver / 7dB 20Km SINGLE-MODE 9/125um EL-VA2402 TX 1ch V Transmitter / 1ch A Transmitter / EL-VA2402 RX 1ch V Receiver / 1ch A Receiver / 13dB 40Km EL-VA2602 TX 1ch V Transmitter / 1ch A Transmitter / EL-VA2602 RX 1ch V Receiver / 1ch A Receiver / 20dB 60Km

DIGITAL 1ch VIDEO&1ch AUDIO LINK EL – VA2202 TX / RX LINK SPECIFICATIONS VIDEO Video Input: 1 volt pk-pk ( 75 ohms ) Video Bandwidth: 10 Hz – 6.5 MHz Differential Gain: <1% Differential Phase: <1˚ Tilt: <1% Signal-to-Noise Ratio: >63dB AUDIO Audio in/output: 0dBm r.m.s( 2.2V pk-pk ) Audio Bandwidth: 20 Hz – 20 KHz Signal-to-Noise Ratio: >67dB WAVELENGTH 1310/1550nm OPTICAL EMITTER Laser Diode NUMBER OF FIBER 1Core LED INDICATORS -. V Transmitter / D Transceiver / A Receiver .Video input level display (7 segment) .RX, TX Data LED .Power, Audio LED -.V Receiver / D Transceiver / A Transmitter .Video output level display (7 segment) .Fiber optic cable status alarm. CONNECTORS Video: BNC (Gold Plated Center-Pin) Audio RCA Connector Optical: ST or SC Connector ELECTRICAL & MECHANICAL Power: 12 VDC @ 1.2A Surface Mount: From Rack Number of Rack Slots: 12 Power Consumption : 1 card ( 0.30A) Current Protection: Automatic Resettable Solid-State Current limiters Size( WxHxD ) Module Type 123 x 35 x 220mm 3u Card Type 25 x 128 x 224mm 1u Rack Mount 483 x 44 x 330mm 3u Rack Mount 483 x 132 x 275mm ENVIRONMENTAL MTBF: > 100,000 hours Operating Temp: -20℃ to +70℃ Storage Temp: -40℃ to +85℃ Relative Humidity: 0% to 95% (non-condensing) SYSTEM DESIGN Video (coax) Video (coax) 1 Fiber 9/125um SM Pre AMP Pow AMP ELIM Co., Ltd 3F, A-dong, 50, ELIM Building, sanupro 155beongil, Gwonseon-Gu, Suwon-si, Gyeonggi-Do, Korea(Goseck-dong, sanup 3dangi) Tel : +82-31- 257- 7157 Fax : +82-31- 257-7159 e-mail:h0824@elimopt.co.kr http:/www.elimopt.co.kr