FIX ERROR CODE “89” IN HP DESIGNJET T2500 PRINTER

HP Designjet T2500 Printer exhibits error Code “89” which indicates “PostScript ROM Failure”. The error shows that your PS ROM might be incorrectly seated or is not configured accordingly. It is also possible that there damaged pin present in the printer. In order to troubleshoot such error, you need to verify the ROM SIMM’s location, computer as well. Thus, whatever the cause behind the happening of the Error code 89, as it is suggested to call on HP Printer Contact Number. Here you would come I contact with our experts who are capable enough to deal with such sort of issues. Below we have discussed methods to fix the problem that can help you to overcome the problem on your own-

CHECK TO ROM SIMM LOCATION Here first you should check to see that the ROM SIMM that is in the proper location and oriented properly Then turn the printer off and check if it does resolve the issue. If issues still occur then check the PS ROM for any damage and repeat. If the error continues then you need to change the PS ROM

POWER CYCLING THE PRINTER Here first you need to use the power switch at the rear to turn off the printer, and then disconnect the power cord Remove all paper from the stacker and basket and then reconnect the power cord Perform the stacker ramps motor diagnostic test to troubleshoot the problem further Confirm that the stacker ramps motor cable is unspoiled and accordingly seated connected to the engine PCA

POSTSCRIPT ROM’S/SIMM FLAWED You should try to check that your PostScript ROM’s/SIMM are working or it’s defective. If they are defective, then you will have to repair it essential in order to ducking the glitches. In case, after performing all the steps, still this issue is not resolved and you are unable to use printing function, then you contact to HP tech support team to get complete support.

CONTACT DETAILS Visit Us /hp-printer-support/ Call Us Toll-Free :