Redes de Computadores Prática - Roteamento
Equipamentos ● Switch Cisco 1900 Series – 12 portas Ethernet – 2 portas FastEthernet ● Roteador Cisco 2501 – 1 porta Ethernet – 2 portas seriais
Topologia Rede 2Rede 1 Rede 3
Topologia (cont.) ● Rede 1 ( /24) – Router1-e0: – PC1-e0: ● Rede 2 ( /24) – Router2-e0: – PC2-e0: ● Rede 3 ( /30) – Router1-s0: – Router2-s0:
Configuração 1)Login no roteador Roteador> enable 2)Configuração da interface local (Ethernet LAN): Roteador# configure terminal Roteador (config)# interface ethernet 0 Roteador (config – if)# ip address Roteador (config – if)# no shutdown Roteador (config – if)# exit Roteador (config)#
Configuração (cont.) 3)Configuração da interface WAN: Roteador (config)# interface serial 0 Roteador (config – if)# ip address Roteador (config – if)# clock rate Roteador (config – if)# encapsulation ppp Roteador (config – if)# no shutdown Roteador (config – if)# exit Roteador (config)# exit Roteador#
Configuração (cont.) 4)Salvando as configurações Roteador# copy run start 5)Configurando as rotas Roteador# config t Roteador (config)# ip route Roteador (config)# ip route serial0 Roteador (config)# ip route serial0 Roteador (config)# exit Roteador# copy run start
Configuração (cont.) 6)Verificando as configurações Roteador# show configuration Roteador# show interface ethernet 0 Roteador# show interface serial 0
Exercícios ● Configurar Roteador 2 ● Testar a comunicação entre as redes
Exercício 2