LINOLEUM SHEETING ACCESSORIES MARMOLEUM ACCESSORIES

INTRODUCTION  Marmoleum is a natural linoleum floor covering designed and manufactured using 100% green electricity  It consists of linseed oil, natural resins, wood flour, pigments and inorganic fillers calendered in two layers on a jute backing  It is naturally antibacterial and resistant to cigarette burns  Marmoleum is finished with the factory-applied Topshield 2 surface treatment for ease of maintenance, whilst eliminating the need for waxing of sprayed refurbishment during the life- time of the product  Marmoleum Striato’s retro-yet-modern linear design adds an extra dimension to large, tall and open spaces  By playing with colour and exploring the boundaries of a 150-year old process, Forbo created new designs and colour combinations  The collection is available in 18 colours ranging from subtle to very distinct shades

BENEFITS  Linoleum has a 150-year heritage  Created entirely from raw materials obtained from their natural habitat  Sustainable and durable, with the lowest cost of ownership  Marmoleum is biodegradable  Improved stain resistance  Marmoleum delivers a higher caloric value and creates thermal energy that outweighs the energy used during production MARMOLEUM ACCESSORIES_

ACCESSORIES RANGE MARMOFORM S INNER CORNER The preformed Marmoform S Inner Corner is a strong, elegant preformed coving that reduces dirt build-up and is easy to install. It provides a hygienic and watertight floor- to wall connection and protects the base of the wall during cleaning. Packaging: 1 piece Colours: All colours from the Real and Fresco range Colours from the Vivace / Concrete / Walton Uni / Striato can be manufactured on request MARMOFORM S OUTER CORNER REAL The functionality of the Marmoform S Outer Corner is the same as the Marmoform S Inner Corner, but it can be installed in outer corners instead of inner corners. Packaging: 1 piece Colours: All Marmoleum colours DESCRIPTIONS_

ACCESSORIES RANGE MARMOFORM SW INNER CORNER (REAL/VIVACE/FRESCO) The preformed Marmoform SW Inner Corner is also a strong and elegant preformed coving like the Marmofom S inner corner, but is provided with a Marmoweld capping. Packaging: 1 piece Colours: All Marmoleum colours MARMOFORM SW OUTER CORNER (REAL/ VIVACE/ FRESCO) The functionality of the Marmoform SW outer corner is the same as the Marmoform S outer corner, but the Marmoform SW is provided with a Marmoweld capping. Packaging: 1 piece Colours: All Marmoleum colours DESCRIPTIONS_

ACCESSORIES RANGE MARMOFORM S SKIRTING Pre-formed Marmoleum skirtings add the finishing touch to the floor. When the skirting is welded to the linoleum floor, it ensures a hygienic, watertight floor. The top edge may be covered for hygiene or aesthetic purposes, using WA edging strip. Packaging: 2.40m Colours: All colours from the Real and Fresco range Colours from the Vivace / Concrete / Walton Uni / Striato can be manufactured on request MARMOSTRIP W (REAL/VIVACE/FRESCO) The Marmostrip collection of skirtings provide a functional as well as attractive junction between floor and wall. A wide choice of colours and materials makes it possible to create numerous practical and aesthetic designs. Forbo’s Marmostrip W provides a hygienic, practical and elegant capping. Article Reference: 049 Packaging: 2.40m Colours: 8 Colours from the Real and Fresco range Colours from the Vivace / Concrete / Walton Uni / Striato can be manufactured on request DESCRIPTIONS_

 FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations WARRANTY

 Approximately 80% of the dirt and soiling that has to be cleaned off a floor has been trafficked in from outside the building  More than 90% of that soiling can be avoided by the use of an effective entrance matting system.  When less dirt is trafficked through the entrance there will be a reduction in maintenance requirements  Regular cleaning is more cost-effective and hygienic than occasional heavy-duty cleaning  Wipe up any grease and oil spills immediately and treat stains as soon as they are observed  Black rubber wheels and rubber furniture feet can discolour the floorcovering. Hard plastic is preferred.  Always follow the manufacturer’s dosage instructions regarding the use of cleaning chemicals. MAINTENANCE PREVENTIVE_

 Floor maintenance begins immediately after the completion of installation  The initial step is to remove any loose dirt or debris using a dry mop, broom or vacuum  Sand, construction debris and sharp-edged objects may result in irreparable damage being inflicted to the new floor  Remove any visible adhesive residue using a damp cloth. Once the adhesive has cured it will be difficult to remove  If other trades are working in the building after the installation of the flooring, the floor must be protected from subsequent damage by the use of thick paper, cardboard or hard board  No wet maintenance must take place until 72 hours (3 days) have elapsed from the time of installation (this is to ensure that the adhesive has sufficient time to cure properly and develop full bond strength) MAINTENANCE POST-INSTALLATION SITE CLEAN_

 Dust mop or vacuum the floor to remove loose soil and dust  Scrub the floor using a solution of FloorworX Maintain diluted 1:10 with clean water, with a rotary machine fitted with a blue pad  Remove the residue immediately after scrubbing using a wet/dry vacuum  Rinse with clean water using a mop and allow the floor to dry  Dry buff the floor using a rotary or high speed machine fitted with a white pad  For higher traffic areas, apply FloorworX Spray Buff in a fine stream or mist onto the floor in front of a rotary machine fitted with a red pad and work in until dry  FloorworX Spray Buff applied in this manner at the rate of 600m2 per litre assists in maintaining a smooth surface and constant level of gloss MAINTENANCE INITIAL CLEAN_

 Dust mop or vacuum on a daily basis to remove dust and loose dirt  Treat spills, spots and stains immediately. Spot clean by hand with a red or white pad and a diluted solution of FloorworX Maintain, working from the outside of the mark to its centre  Dry buff or spray buff periodically, as described in Initial Clean Procedure  The frequency of dry buffing or spray buffing is dependent on the amount of foot traffic and the effectiveness of the daily cleaning regime MAINTENANCE REGULAR CLEANING_

 Apply a solution of FloorworX Maintain diluted 1:10 with clean water to the floor using a wet mop and allow to soak for 10 minutes  Scrub the floor with a rotary machine fitted with a red pad  Remove the residue immediately after scrubbing using a wet/dry vacuum  Rinse with clean water using a mop and allow the floor to dry MAINTENANCE PERIODIC MAINTENANCE_