Tacoma Narrows Bridge Collapse

Slides:



Advertisements
Similar presentations
Engineering Terms Engineers design all structures with enough strength to withstand the force and load that will be placed upon them. Generally loads are.
Advertisements

BRIDGES! July
Waves – Topic 4 Chapters 13, 14, 25, 26. Traveling Waves  Wave Motion: Disturbance which travels in a medium transferring energy and momentum. –No Transfer.
The Tacoma Narrows Bridge(s) Click to continue…. The original Tacoma Narrows Bridge was built between November 1938 and July 1, 1940.
Group 14 Jerrod Stock David Villers.  Location: between Tacoma and Gig Harbor, Washington  Total Length: 5,939 ft.  Longest Span: 2,800 ft.  Width:
Engineering Terms Engineers design all structures with enough strength to withstand the force and load that will be placed upon them. Generally loads are.
Chapter 11 Waves. Waves l A wave is a disturbance/oscillation generated from its source and travels over long distances. l A wave transports energy but.
In this presentation you will: explore the nature of resonance
Bridge Engineering: Lessons from Rome to Tacoma
Resonance and Bridge Construction Engineers have always pushed the frontiers of bridge construction with both materials and design. Sometimes they push.
Oscillations Simple Harmonic Motion Velocity and Acceleration in SHM
Structures Real World Engineering Ms. Sicola. Live loads vs dead loads Live loads refer to loads that do, or can, change over time. Objects that move.
1 LECTURE 4 CP Ch 14 Damped Oscillations Forced Oscillations and Resonance.
Mechanical Vibrations Jeff Rhoads and Terry Ballinger MSU 2006.
13. Oscillatory Motion. Oscillatory Motion 3 If one displaces a system from a position of stable equilibrium the system will move back and forth, that.
Suspension Bridge Design
Vibrations, Waves and Sound
The Collapse of Tacoma Narrows Bridge: The Ordinary Differential Equations Surrounding the Bridge Known as Galloping Gertie Math 6700 Presentation Qualitative.
‘Galloping Gertie’ The Tacoma Narrows Bridge Failure November 21, 2006 Max Walker Robby Poshusta Robby Poshusta Jan Kubicka Jan Kubicka Aaron Aslin Aaron.
There are many types of bridges including:
Opened to traffic: July 1, 1940 Collapsed: November 7, 1940 Lewis Cluck - lxc Advanced Requirements Engineering – SE 6361.Z01 Oct. 26, 2012.
Bridges.
Beam Bridge consists of a horizontal beam supported at each end by piers. The weight of the beam pushes straight down on the piers. The farther apart.
Bridges & Forces.
Bridging the Gap: Building Bridges 101, It Is Time to Get To Work
By : Lisa Runt. Types of Bridges Beam – the simplest type of bridge. It is made of two or more supports which hold up a beam. Arch – weight is carried.
Resonance You must exert a force on an oscillator to keep it oscillating.
WAVES AND SOUND 5% AP Physics B Waves – what is a wave? Wave – a vibration or disturbance in space Mechanical Wave requirements: 1.Source of disturbance.
CHAPTER 23 WAVES 23.1 Harmonic Motion pp
Sound Test Answers. Question 1 What is the frequency of the pendulum given the graph of its horizontal position as a function of time? Show your work.
Aeroelastic effects Wind loading and structural response Lecture 14 Dr. J.D. Holmes.
Engineering Structures Bridge Building. Structures Structures are anything that are built or constructed. These are things we live in, work in, learn.
Tacoma Narrows Bridge “The Galloping Gertie”. Why was it built? Commissioned in 1937 to cross the Tacoma Straits of Puget Sound Commissioned in 1937 to.
ASCE Wind Loads SESSION 1-2 Wind Engineering Theory: Bluff Body Aerodynamics.
L 20 – Vibration, Waves and Sound -1 Resonance The pendulum Springs Harmonic motion Mechanical waves Sound waves Musical instruments Tacoma Narrows Bridge.
Tacoma Narrows Bridge From TPT. Vertical Oscillations The only observed oscillation up until an hour before the collapse was vertical. Example of simple.
There are basically 4 different types of bridges: Arch bridge Suspension bridge Beam bridge Cable-stayed bridge An engineer would choose the correct bridge.
Forced Oscillation.
RESONANCE MUSICAL ACOUSTICS Science of Sound Chapter 4.
Tay Bridge Disaster.
Learning from the Past, Looking to the Future Bridge Natural Frequencies.
Sound. Review Sound is a mechanical wave Sound is a mechanical wave
Forensic Engineering June 1, 2009.
Bridge Designs Bridges are often built over huge landmasses or bodies of water. Their design depends on their function and location. We will take you through.
By Willie Hustead. What is sound? Sound is a sequence of waves of pressure that travel through media such as air or water that is able to compress easily.
-Simple Pendulum -Damped and Forced Oscillations -Resonance AP Physics C Mrs. Coyle Mrs. Coyle.
Dr. Hatem Elaydi Engineering Technical English Islamic University of Gaza March 19, 2016 Load, Stress and Strain Unit 30.
Building Construction
Group 7.  Designed by Sir Thomas Bouch  Completed in February 1878  Longest spanning bridge in the world at the time ( 2 miles)  Built to span the.
Countdown to Disaster The collapse of the Tacoma Narrows Bridge By Group 4.
 Please take out: Sound Station Lab Natural frequency and resonance notes.
 Opened to traffic July 1 st 1940  Third largest suspension bridge in the world  Bridge nicknamed Galloping Gertie.
Bridges.  A bridge provides passage over some sort of obstacle: a river, a valley, a road, a set of railroad tracks... Etc…  The type of bridge used.
Sound Test Answers. Question 1 What is the frequency of the pendulum given the graph of its horizontal position as a function of time? Show your work.
Types of Bridges Source:
The Engineering Disaster of Tacoma Washington Bridge Collapse of 1940 Kevin Russell and Ricky Jones 10/11/11.
L 20 – Vibration, Waves and Sound-1
Bridges There are basically 4 different types of bridges: Arch bridge
Tacoma Narrows Bridge & Aeroelastic Fluttering
DYNAMIC STALL OCCURRENCE ON A HORIZONTAL AXIS WIND TURBINE BLADE
Beam bridge Truss bridge Arch bridge Suspension bridge
Bridge Engineering: Lessons from Rome to Tacoma
Foundations of Physics
Foundations of Physical Science
Standing Waves 14.8 When a traveling wave reflects back on itself, it creates traveling waves in both directions The wave and its reflection interfere.
Damped and driven oscillations
Bridge Design and Construction
Bridges.
Bridge Design Tyrus Charley 10/19/16 P7.
Engineering Terms Engineers design all structures with enough strength to withstand the force and load that will be placed upon them. Generally loads are.
Presentation transcript:

Tacoma Narrows Bridge Collapse Group 4 Earnán Beary Gerard Eyres Francis McCarthy Louise O’Neill

Background Construction Started in November 1938 Opened on 11 July 1940 Third Longest Bridge in the World

Background Deck constructed using girders rather than trusses In comparison to other suspension bridges it had Relatively Low Stiffness Smaller Dead Load Low damping of the structure resulting in large oscillations of the bridge deck

What happened and Why? Nov 7 1940 the oscillations grew Winds of 42mph 38 oscillations per minute Amplitude of 3ft Bridge closed to traffic at 10.00am

What happened and Why? The Collapse Centre stay snapped Bridge began to twist Torsional Movement caused centre span collapse Weight of side spans pulled towers 12ft towards edge of the bridge

Technical factors Ultimate collapse due to metal fatigue caused be oscillations and torsional movements

Technical factors Theories put forward for these movements Random Turbulence Periodic Vortex Shedding Aerodynamic Instability (negative damping) Random Turbulence Early theory for the collapse was resonance However random turbulence in the air would not have led to steady oscillations Therefore the resonance theory was discounted

Periodic Vortex Shedding Theory that blunt objects such as bridge decks could shed periodic vortices in their wake Vortex shedding frequency was calculated to be 1Hz However torsional frequency observed was 0.2Hz Therefore unlikely vortex shedding caused oscillations Aerodynamic Instability (negative Damping) Wind hit the bridge from angle below the horizontal Aerodynamic lift was caused in the bridge span due to the wind pressure below the bridge Caused the bridge to twist in an clockwise direction As span rotated strain energy built up in the span This caused the span to rotate counter-clockwise Oscillations caused the steel girders to fail

Managerial factors Widely believed that bridge designer not responsible for collapse. Dynamic damper on bridge Damaged from sand entering it when sand-blasting was occuring on the bridge Therefore the damper should not have been installed until all sand-blasting had been completed on the bridge

Lessons Learnt A number of lessons were learnt following the collapse of the Tacoma Narrows Bridge Following the investigation all bridges across America are now tested in wind tunnels Development new theories of vibration, aerodynamics and harmonics in relation to bridge design