Dividing Polynomials: Synthetic Division

Essential Question  How do I use synthetic division to determine if something is a factor of a polynomial?

Khan Academy Videos  UEQJN0 UEQJN0  KclEQ KclEQ

Synthetic Division - To use synthetic division: There must be a coefficient for every possible power of the variable. The divisor must have a leading coefficient of 1. divide a polynomial by a polynomial

Step #1: Write the terms of the polynomial so the degrees are in descending order. Since the numerator does not contain all the powers of x, you must include a 0 for the

Step #2: Write the constant r of the divisor x-r to the left and write down the coefficients. Since the divisor is x-3, r=

5 Step #3: Bring down the first coefficient, 5.

5 Step #4: Multiply the first coefficient by r, so and place under the second coefficient then add. 15

5 Step #5: Repeat process multiplying the sum, 15, by r; and place this number under the next coefficient, then add

Step #5 cont.: Repeat the same procedure Where did 123 and 372 come from?

Step #6: Write the quotient. The numbers along the bottom are coefficients of the power of x in descending order, starting with the power that is one less than that of the dividend

The quotient is: Remember to place the remainder over the divisor.

Ex 7: Step#1: Powers are all accounted for and in descending order. Step#2: Identify r in the divisor. Since the divisor is x+4, r=-4.

Step#3: Bring down the 1st coefficient. Step#4: Multiply and add. -5 Step#5: Repeat

Assignment  Complete the worksheet.