NOTE: To change the image on this slide, select the picture and delete it. Then click the Pictures icon in the placeholder to insert your own image. CCIE R&S WRITTEN EXAM CCIE Certification Exam Questions & Answers Pack Pass4surebraindumps.com Presents:

CCIE Exam Information  Exam Number CCIE  Associated Certifications CCIE Routing and Switching  Duration of Exam 120 Minutes  Number of Questions ( questions) Available Languages English, Japanese

What is CCIE Certification Exam....??? CCIE Composite Exam: The CCIE is the composite exam associated with the Cisco CCIE Routing and Switching certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices. This exam tests a candidate's knowledge and skills required to install, operate, and troubleshoot a small to medium size enterprise branch network.

Why Choose Pass4surebraindumps……!!! Pass4surebraindumps providing you with Following Key Characteristics: 100% Success Guarantee 6 Months Free Updates Valid for All Countries Money Back Assurance

CCIE Exam Questions & Answers Which three statements about the output are true? (Choose three.) A. An mrouter port can be learned by receiving a PIM hello packet from a multicast router. B. This switch is configured as a multicast router. C. Gi2/0/1 is a trunk link that connects to a multicast router. D. An mrouter port is learned when a multicast data stream is received on that port from a multicast router. E. This switch is not configured as a multicast router. It is configured only for IGMP snooping. F. IGMP reports are received only on Gi2/0/1 and are never transmitted out Gi2/0/1 for VLANs 10 and 20. Answer: A, B, C

CCIE Exam Questions & Answers Which technology does the use of bi-directional BPDUs on all ports in the topology support? A. RSTP B. MST C. Bridge Assurance D. Loop Guard E. Root Guard F. UDLD Answer: C

CCIE Exam Questions & Answers What is the role of this multicast router? A. a first-hop PIM router B. a last-hop PIM router C. a PIM rendezvous point D. a PIM inter-AS router Answer: C

CCIE Exam Questions & Answers For which reason could a BGP-speaking device in autonomous system be prevented from installing the given route in its BGP table? A. The AS number of the BGP is specified in the given AS_PATH. B. The origin of the given route is unknown. C. BGP is designed only for publicly routed addresses. D. The AS_PATH for the specified prefix exceeds the maximum number of ASs allowed. E. BGP does not allow the AS number Answer: A

CCIE Exam Questions & Answers A TCP/IP host is able to transmit small amounts of data (typically less than 1500 bytes), but attempts to transmit larger amounts of data hang and then time out. What is the cause of this problem? A. A link is flapping between two intermediate devices. B. The processor of an intermediate router is averaging 90 percent utilization. C. A port on the switch that is connected to the TCP/IP host is duplicating traffic and sending it to a port that has a sniffer attached. D. There is a PMTUD failure in the network path. Answer: D

CCIE Exam Questions & Answers Which congestion-avoidance or congestion-management technique can cause global synchronization? A. Tail drop B. Random early detection C. Weighted random early detection D. Weighted fair queuing Answer: A

CCIE Exam Questions & Answers Which two options are reasons for TCP starvation? (Choose two.) A. The use of tail drop B. The use of WRED C. Mixing TCP and UDP traffic in the same traffic class D. The use of TCP congestion control Answer: C, D

CCIE Exam Questions & Answers Which type of port would have root guard enabled on it? A. A root port B. An alternate port C. A blocked port D. A designated port Answer: D

CCIE Exam Questions & Answers Which three statements are true about PPP CHAP authentication? (Choose three.) A. PPP encapsulation must be enabled globally. B. The LCP phase must be complete and in closed state. C. The hostname used by a router for CHAP authentication cannot be changed. D. PPP encapsulation must be enabled on the interface. E. The LCP phase must be complete and in open state. F. By default, the router uses its hostname to identify itself to the peer. Answer: D, E, F

CCIE Exam Questions & Answers Which two options are causes of out-of-order packets? (Choose two.) A. a routing loop B. a router in the packet flow path that is intermittently dropping packets C. high latency D. packets in a flow traversing multiple paths through the network E. some packets in a flow being process-switched and others being interrupt-switched on a transit router Answer: D, E

Pass4sure Believes in Your Success You can Trust Pass4sure Because we Believe that: