Section 3 Descriptive Geometry Chapter 14 Intersections.

Slides:

Advertisements

Similar presentations

Technical Graphics Communication: Multiview Drawings (Part 2)

Advertisements

Section 2 Drafting Techniques and Skills

7 Auxiliary Views. 7 Auxiliary Views Explain the purposes of auxiliary views. Identify auxiliary views and explain their relationship to regular views.

Solid Cylinder cut at an angle Drawing Abilities Teacher © J Lewis 2004.

Section 2 Drafting Techniques and Skills

In this lesson, you will learn how to visualize the 2D cross-sections of 3D shapes Cross Section: the 2 dimensional shape that results from cutting through.

Unit 5 Multiview Drawings. Unit 5 Multiview Drawings.

Engineering Graphics Stephen W. Crown Ph.D.

ENGINEERING GRAPHICS 1E7

ENGINEERING GRAPHICS 1E9

Auxiliary Views In creating the Auxiliary View you measure the distance for the front view to top view.

Auxiliary Views Chapter 7. 2 Technical Drawing 13 th Edition Giesecke, Mitchell, Spencer, Hill Dygdon, Novak, Lockhart © 2009 Pearson Education, Upper.

CE En 112 Engineering Drawing with CAD Application

ME 250: Design & Manufacturing I School of Mechanical Engineering

AUXILIARY VIEWS C H A P T E R E I G H T * = on EXAM 5.

Chapter 14 Auxiliary Views.

© Dr Simin Nasseri Southern Polytechnic State University 1 Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Intersections & Developments (Text Chapter 31)

Multi-View Drawing (Text Chapter 8)

Problem: A vertical cone, base diameter 75 mm and axis 100 mm long,

Development of Surfaces

Fundamentals of Descriptive Geometry (Text Chapter 26)

The Geometry of Solids Section 10.1.

Cubes, Prisms, Pyramids, Cylinders, Cones and Spheres

Section Plane Through Apex Section Plane Through Generators Section Plane Parallel to end generator. Section Plane Parallel to Axis. Triangle Ellipse Parabola.

Geometry 12.1/2 Representations of 3-d Figures Surface Area of Prisms and Cylinders.

f30 G1 G A a F B E C D T F A1 A G G1 B C G A 50 G1 A1

SOLIDS To understand and remember various solids in this subject properly, those are classified & arranged in to two major groups. Group A Solids having.

PROJECTIONS OF SOLIDS & SECTIONS OF SOLIDS

Divide into meridian sections – Gore development

PRESENTATION ON INTERSECTION OF SOLIDS by Mr.Venkata Narayana Mr.A.S.Pavan Kumar Department of Mechanical Engineering SNIST.

SANTANA DRAFTING MULTIVIEWS 1 An introduction Mr. Fitzgerald Rm

AUXILIARY VIEWS C H A P T E R E I G H T.

Descriptive Geometry. Introduction  What is Descriptive Geometry? →It is the study of points, lines, and planes in space to determine their locations.

Solid Geometry Student Expectations 7 th Grade: 7.3.6C Use properties to classify three- dimensional figures, including pyramids, cones, prisms, and.

Introduction to 3D Solids and Solids of Revolution Some 3D shapes can be formed by revolving a 2D shape around a line (called the axis of revolution).

Section 2 Drafting Techniques and Skills

Unit 1 Drafting Standards & Techniques -Sketching.

9 Multiview Drawings Permission granted to reproduce for educational use only. © Goodheart-Willcox Co., Inc. Understand the principles of orthographic.

(1) Prism: It is a polyhedra having two equal and similar faces called its ends or bases, parallel to each other and joined by other faces which are rectangles.

Drafting I – Coach Pennington

Auxiliary Views Chapter 7.

Solid Cylinder cut at an angle

Design and Communication Graphics

Auxiliary Views Engineering II.

Visit for more Learning Resources

MULTIVIEWS 1 An introduction

Section 3 Descriptive Geometry

Divide into meridian sections – Gore development

Auxiliary Views & Development

Engineering Geometry Engineering geometry is the basic geometric elements and forms used in engineering design. Engineering and technical graphics are.

Mechanical Engineering Drawing MECH 211/M

Orthographic Projection

UNIT – III Syllabus (a) Projection of planes: Introduction, types of planes, projection of planes, projection of planes perpendicular to both the reference.

Orthographic Projection

Auxiliary Drawings (Text Chapter 11)

Auxiliary Views Chapter 7.

SECTION VIEWS C H A P T E R S E V E N.

Chapter 4 Auxiliary Views.

Solid Geometry.

C H A P T E R 72 Auxiliary Views.

Points, Lines, and Planes

Isometric and Orthographic Projections

Auxiliary Drawings (Text Chapter 11)

Solid Geometry.

Auxiliary views Descriptive geometry Section of solids Flóra Hajdu

Solid Geometry.

Orthographic Projection

AUXILIARY VIEWS C H A P T E R E I G H T.

Presentation transcript:

Section 3 Descriptive Geometry Chapter 14 Intersections

Permission granted to reproduce for educational use only. 3 © Goodheart-Willcox Co., Inc. Objectives List the basic types of geometric surfaces and intersections. Describe how intersections are formed and identify the common methods used in their construction. Construct intersections using manual and CAD procedures. List the applications of intersections in construction and manufacturing.

Permission granted to reproduce for educational use only. 4 © Goodheart-Willcox Co., Inc. Intersection Defined by objects passing through each other. Common in building designs, aerospace applications, and automotive parts. Classified by types of geometrical surfaces involved.

Permission granted to reproduce for educational use only. 5 © Goodheart-Willcox Co., Inc. Types of Geometrical Surfaces Ruled geometrical surfaces Plane surfaces Single-curve surfaces Warped surfaces Double-curve geometrical surfaces

Permission granted to reproduce for educational use only. 6 © Goodheart-Willcox Co., Inc. Ruled Geometrical Surfaces

Permission granted to reproduce for educational use only. 7 © Goodheart-Willcox Co., Inc. Double-Curve Geometrical Surfaces

Permission granted to reproduce for educational use only. 8 © Goodheart-Willcox Co., Inc. Gore Method May be used for approximate development of spherical surface.

Permission granted to reproduce for educational use only. 9 © Goodheart-Willcox Co., Inc. Spatial Relationships Point location on line. Intersecting lines and nonintersecting lines in space. Visibility of crossing lines in space. Visibility of line and plane in space. Location of piercing point.piercing point Location of line through point and perpendicular to oblique plane.

Permission granted to reproduce for educational use only. 10 © Goodheart-Willcox Co., Inc. Point Location on a Line Solved by orthographic projection.

Permission granted to reproduce for educational use only. 11 © Goodheart-Willcox Co., Inc. Intersecting and Nonintersecting Lines in Space Solved by orthographic projection. Common point must exist for lines to intersect.

Permission granted to reproduce for educational use only. 12 © Goodheart-Willcox Co., Inc. Visibility of Crossing Lines in Space Solved by projecting crossing point to adjacent view. Line “touched” first in adjacent view determines visibility.

Permission granted to reproduce for educational use only. 13 © Goodheart-Willcox Co., Inc. Visibility of a Line and Plane in Space Solved by projecting crossing points to adjacent view. Object “touched” first in adjacent view determines visibility.

Permission granted to reproduce for educational use only. 14 © Goodheart-Willcox Co., Inc. Location of the Piercing Point of a Line with a Plane Solved by orthographic projection method or auxiliary view method. Manual projection techniques used in manual drafting. Construction lines created in CAD.

Permission granted to reproduce for educational use only. 15 © Goodheart-Willcox Co., Inc. Location of the Piercing Point (Orthographic Projection Method)

Permission granted to reproduce for educational use only. 16 © Goodheart-Willcox Co., Inc. Location of the Piercing Point (Auxiliary View Method)

Permission granted to reproduce for educational use only. 17 © Goodheart-Willcox Co., Inc. Location of a Line Perpendicular to an Oblique Plane

Permission granted to reproduce for educational use only. 18 © Goodheart-Willcox Co., Inc. Intersection Procedures May be used for problems involving 2D objects, 3D objects, or combinations of both. Regular projection methods used in 2D manual and CAD drafting. Solid modeling more useful for 3D CAD applications.

Permission granted to reproduce for educational use only. 19 © Goodheart-Willcox Co., Inc. Methods Used for Solving Intersection Problems Orthographic projection method Auxiliary view method Cutting plane method

Permission granted to reproduce for educational use only. 20 © Goodheart-Willcox Co., Inc. Intersection of Two Planes Using Orthographic Projection

Permission granted to reproduce for educational use only. 21 © Goodheart-Willcox Co., Inc. Intersection of Two Planes Using Orthographic Projection

Permission granted to reproduce for educational use only. 22 © Goodheart-Willcox Co., Inc. Intersection of an Inclined Plane and a Prism

Permission granted to reproduce for educational use only. 23 © Goodheart-Willcox Co., Inc. Intersection of an Inclined Plane and a Prism

Permission granted to reproduce for educational use only. 24 © Goodheart-Willcox Co., Inc. Intersection of an Inclined Plane and a Prism

Permission granted to reproduce for educational use only. 25 © Goodheart-Willcox Co., Inc. Intersection of an Oblique Plane and a Prism

Permission granted to reproduce for educational use only. 26 © Goodheart-Willcox Co., Inc. Intersection of an Oblique Plane and a Prism

Permission granted to reproduce for educational use only. 27 © Goodheart-Willcox Co., Inc. Intersection of an Oblique Plane and an Oblique Prism

Permission granted to reproduce for educational use only. 28 © Goodheart-Willcox Co., Inc. Intersection of an Oblique Plane and an Oblique Prism

Permission granted to reproduce for educational use only. 29 © Goodheart-Willcox Co., Inc. Intersection of Two Prisms 1.Draw cutting plane in top view. 2.Project Points 1 and 2 to front view. 3.Project lines to Edge CC to locate Points 3 and 4. 4.Project remaining piercing points and draw intersection.

Permission granted to reproduce for educational use only. 30 © Goodheart-Willcox Co., Inc. Intersection of Two Prisms 1.Draw construction lines to locate Points 1, 2, 1, and 2. 2.Draw construction lines to locate Points 3 and 4. 3.Locate remaining piercing points and create intersection.

Permission granted to reproduce for educational use only. 31 © Goodheart-Willcox Co., Inc. Intersection of Two Prisms Using the Intersect Command

Permission granted to reproduce for educational use only. 32 © Goodheart-Willcox Co., Inc. Intersection of a Plane and a Cylinder 1.Draw parallel lines in top view and project intersections to front and side views. 2.Project points from edge view to front view. 3.Connect points to form intersection.

Permission granted to reproduce for educational use only. 33 © Goodheart-Willcox Co., Inc. Intersection of a Plane and a Cylinder 1.Draw horizontal construction lines in top view and project points to front and side views. 2.Draw construction lines to locate intersections in front view. 3.Create elliptical arcs to complete intersection.

Permission granted to reproduce for educational use only. 34 © Goodheart-Willcox Co., Inc. Intersection of an Oblique Plane and a Cylinder 1.Draw cutting planes in top view. 2.Project intersections to front view. 3.Connect piercing points to form intersection. 4.Complete with irregular curve.

Permission granted to reproduce for educational use only. 35 © Goodheart-Willcox Co., Inc. Intersection of an Oblique Plane and a Cylinder 1.Draw construction lines to create cutting planes in top view. 2.Draw construction lines to front view. 3.Create spline to connect piercing points and complete intersection.

Permission granted to reproduce for educational use only. 36 © Goodheart-Willcox Co., Inc. Intersection of an Oblique Plane and an Oblique Cylinder 1.Construct primary auxiliary view. 2.Pass cutting planes to edge view. 3.Project intersections to profile view to form line of intersection. 4.Transfer points to front view.

Permission granted to reproduce for educational use only. 37 © Goodheart-Willcox Co., Inc. Intersection of an Oblique Plane and an Oblique Cylinder 1.Draw construction lines to create primary auxiliary. Use Spline command to create cylinder ends. 2.Draw construction lines to create cutting planes. 3.Project intersections to profile view. Use Spline command to create line of intersection. 4.Transfer points to front view in similar manner.

Permission granted to reproduce for educational use only. 38 © Goodheart-Willcox Co., Inc. Intersection of a Cylinder and a Prism 1.Construct primary auxiliary view. 2.Pass cutting planes through top view. 3.Transfer planes to auxiliary. 4.Project intersections to front view. Draw lines of intersection.

Permission granted to reproduce for educational use only. 39 © Goodheart-Willcox Co., Inc. Intersection of a Cylinder and a Prism 1.Draw construction lines to create primary auxiliary view. 2.Create construction line cutting planes in top view. Offset planes in auxiliary view. 3.Project intersections to front view. Create lines of intersection using Spline command.

Permission granted to reproduce for educational use only. 40 © Goodheart-Willcox Co., Inc. Intersection of Two Cylinders 1.Construct primary auxiliary view. 2.Pass cutting planes through top view. 3.Transfer planes to auxiliary. 4.Project intersections to front view. Draw lines of intersection.

Permission granted to reproduce for educational use only. 41 © Goodheart-Willcox Co., Inc. Intersection of Two Cylinders 1.Draw construction lines to create primary auxiliary view. 2.Create construction line cutting planes in top view. Offset planes in auxiliary view. 3.Project intersections to front view. Create lines of intersection using Spline command.

Permission granted to reproduce for educational use only. 42 © Goodheart-Willcox Co., Inc. Intersection of an Inclined Plane and a Cone 1.Draw diametric lines through top view. 2.Project intersections to base in front view. Draw lines to apex. 3.Project piercing points to top view. 4.Complete line of intersection.

Permission granted to reproduce for educational use only. 43 © Goodheart-Willcox Co., Inc. Intersection of an Inclined Plane and a Cone 1.Draw construction lines to locate diametric lines in top view. 2.Draw construction lines to base in front view. Draw construction lines to apex. 3.Project piercing points to top view. 4.Complete line of intersection using Spline command.

Permission granted to reproduce for educational use only. 44 © Goodheart-Willcox Co., Inc. Intersection of a Cylinder and a Cone 1.Draw diametric lines through top view. 2.Project intersections to front and profile views. 3.Project piercing points from profile view. 4.Complete lines of intersection.

Permission granted to reproduce for educational use only. 45 © Goodheart-Willcox Co., Inc. Intersection of a Cylinder and a Cone 1.Draw construction lines to locate diametric lines in top view. 2.Draw construction lines to front and profile views. 3.Project piercing points from profile view. 4.Complete lines of intersection using Spline command.

Permission granted to reproduce for educational use only. 46 © Goodheart-Willcox Co., Inc. Review Questions 1.A square prism is made up of _____. A. single-curve surfaces B. plane surfaces C. warped surfaces D. double-curve surfaces B. plane surfaces

Permission granted to reproduce for educational use only. 47 © Goodheart-Willcox Co., Inc. Review Questions 2.The point of intersection between a plane and a line inclined to the plane is called the _____ point. piercing

Permission granted to reproduce for educational use only. 48 © Goodheart-Willcox Co., Inc. Review Questions 3.The _____ method is sufficient for determining whether lines cross in space. A. auxiliary view B. cutting plane C. orthographic projection D. revolution C. orthographic projection

Permission granted to reproduce for educational use only. 49 © Goodheart-Willcox Co., Inc. Review Questions 4.In the _____ method, an edge view is normally constructed to serve as reference for completing the line of intersection. A. auxiliary view B. cutting plane C. orthographic projection D. revolution A. auxiliary view

Permission granted to reproduce for educational use only. 50 © Goodheart-Willcox Co., Inc. Review Questions 5.The _____ command is used to create section views of 3D models. A. Zoom B. Rotate C. Mirror D. Section Plane

Permission granted to reproduce for educational use only. 51 © Goodheart-Willcox Co., Inc. Review Questions 6.The _____ command can be used to create the line of intersection between a cylinder and a prism. A. Circle B. Rectangle C. Spline D. Array C. Spline

Permission granted to reproduce for educational use only. 52 © Goodheart-Willcox Co., Inc. Review Questions 7.Visibility of intersecting lines and planes in space is determined by _____. A. projecting points from adjacent views B. revolving lines C. secondary auxiliary projection D. successive revolution A. projecting points from adjacent views

Permission granted to reproduce for educational use only. 53 © Goodheart-Willcox Co., Inc. Glossary Double-curve geometrical surfaces Surfaces generated by a curved line revolving around a straight line in the plane of the curve. Intersection The line formed at the junction of surfaces where two objects join or pass through each other.

Permission granted to reproduce for educational use only. 54 © Goodheart-Willcox Co., Inc. Glossary Piercing point The point of intersection between a plane and a line inclined to that plane. Ruled geometrical surfaces Surfaces generated by moving a straight line.