Two charges of 16 pC and -65 pC are inside a cube with sides that are of 0.17 m length. Determine the net electric flux through the surface of the cube

A uniform linear charge density of 3.4 nC/m is distributed along the entire x axis. Consider a spherical (radius = 4.5 cm) surface centered on the origin. Determine the electric flux through this surface

A charge of 0.79 nC is placed at the center of a cube that measures 3.4 m along each edge. What is the electric flux through one face of the cube?

kN/C kN/C kN/C kN/C kN/C

N/C 2.36 N/C 3.98 N/C 4.74 N/C 5.86 N/C

N/C 2.42 N/C 3.15 N/C 4.41 N/C 5.20 N/C

N/C 2.38 N/C 3.23 N/C 4.51 N/C 5.35 N/C

N/C N/C N/C N/C N/C

N/C 2.58 N/C 3.40 N/C 4.54 N/C 5.78 N/C

N/C N/C N/C N/C N/C

kN/C kN/C kN/C kN/C kN/C

N/C 2.37 N/C 3.79 N/C 4.82 N/C 5.42 N/C

N/C 2.63 N/C 3.27 N/C 4.66 N/C 5.39 N/C

A point charge (5.1 pC) is located at the center of a spherical surface (radius = 2.6 cm), and a charge of 2.6 pC is spread uniformly upon this surface. Determine the magnitude of the electric field 1.0 cm from the point charge kN/C kN/C kN/C kN/C kN/C

A 3.4-pC point charge is placed at the center of a hollow (inner radius = 1.7 cm, outer radius = 3.3 cm) conducting sphere which has a net charge of 3.4 pC. Determine the magnitude of the electric field at a point which is 4.9 cm from the point charge N/C 2.13 N/C 3.45 N/C 4.17 N/C 5.14 N/C

N/C 2.43 N/C 3.50 N/C 4.21 N/C 5.16 N/C

The field just outside the surface of a long conducting cylinder which has a 3.0-cm radius points radially outward and has a magnitude of 180 N/C. What is the charge density on the surface of the cylinder?

N/C 2.18 N/C 3.26 N/C 4.38 N/C 5.zero

A point charge of 6.3 nC is placed at the center of a hollow spherical conductor (inner radius = 1.2 cm, outer radius = 2.0 cm) which has a net charge of -2.0 nC. Determine the resulting charge density on the inner surface of the conducting sphere

A small metal sphere is suspended from the conducting cover of a conducting metal ice bucket by a non-conducting thread. The sphere is given a positive charge before the cover is placed on the bucket. The bucket is tilted by means of a nonconducting material so that the charged sphere touches the inside of the bucket. Which statement is correct? The positive charge spreads over the outside surface of the bucket and cover. 2.The positive charge remains on the metal sphere. 3.The positive charge spreads equally over the inside and outside surfaces of the bucket and cover. 4.The positive charge spreads over the inside surface of the bucket and cover. 5.The positive charge spreads equally over the sphere and the inside and outside surfaces of the bucket and cover.

An uncharged metal sphere is placed on an insulating puck on a frictionless table. While being held parallel to the table, a rod with a charge q is brought close to the sphere, but does not touch it. As the rod is brought in, the sphere _____ moves toward the rod 2.moves away from the rod 3.remains at rest 4.moves perpendicular to the velocity vector of the rod 5.moves upward off the puck

Which one of the following cannot be a statement of Gauss's Law for some physical situation?

In a charge-free region of space, a closed container is placed in an electric field. A requirement for the total electric flux through the surface of the container to be zero is that _____ the field must be uniform 2.the container must be symmetric 3.the container must be oriented in a certain way 4.the requirement does not exist-the total electric flux is zero no matter what

Your little brother likes to rub his feet on the carpet and then touch you to give you a shock. While you are trying to escape the shock treatment, you discover a hollow metal cylinder in your basement, large enough to climb inside. In which of the following cases will you not be shocked? You climb inside the cylinder, making contact with the inner surface, and your charged brother touches the outer metal surface. 2.Your charged brother is inside touching the inner metal surface and you are outside, touching the outer metal surface. 3.Both of you are outside the cylinder, touching its outer metal surface but not touching each other directly.