CYLINDER HEADS AND VALVES. 1.DEFINITION  Cylinder head is a casting that covers the top of a cylinder.

Slides:

Advertisements

Similar presentations

Engine Operating Principles

Advertisements

Compression Systems Small Engines.

Systems Review 1 ATC Chapter 4.

Engine Operation Chapter 3

Chapter 3 Engine Operation

Cylinder Design Cylinder Liner (Barrel) Design

Cylinder liner The cylinder liner forms the cylindrical space in which the piston reciprocates. The reasons for manufacturing the liner separately from.

Lesson 31 Main Engine Repair (II).  1. Crankpin bearing overhaul  2. Fuel pump removal & re-installation  3. Cylinder head removal/replacement  4.

Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.

Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.

@Perkins Proprietary Information of Perkins Engines Company Limited © All Rights Reserved.

Piston Rings. Purpose: Seal to prevent loss of compression pressure Transfer heat of combustion to cylinder walls Support/guide piston in bore Piston.

Tomislav Skračić, MA Undergraduate English Course for MARINE ENGINEERS 4th Semester Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For.

Piston Assembly Gas and Inertia forces are applied. Gas and Inertia forces are applied. Both of these forces are variable in Both of these forces are variable.

Small Engine Theory What is the purpose of a Small Engine?

Diesel Engine Components

CYLINDER HEADS AND VALVES

1 Hose and Lines. 2 High side / low side System with an expansion valve High SideLow Side Condenser Evaporator Receiver/Drier Compressor Expansion valve.

SMALL ENGINES ENGINE OPERATION FOR A FOUR STROKE ENGINE.

Piston The piston comprises of two pieces, the crown and skirt. The crown is subjected to high temperatures in the combustion space and is liable to be.

Engines Internal combustion engine needs

4 Stroke engine Stroke is defined as the movement of the piston from the 'bottom dead center' (BDC) to the 'top dead center' (TDC) or the other way round,

Diesel Engine 4 Stroke Cycle model

Exhaust valve Exhaust valves open inwards into the cylinder, so that the gas pressure in the cylinder will ensure positive closure and help in dislodging.

DIESEL ENGINE ENGINE DEVELOPMENT DIRECTORATE

Marine Engine Systems Merchant Marine Training Centre.

VALVES LESSON SEVEN. 1.DEFINITION A device used to regulate or control the flow of fluids ( liquid, air or gas ), in pipeings, systems and in machinery.

Four-Stroke Engine Basics

Engine Construction Stationary Parts 2 s/c Slow Speed BEDPLATE LUBE OIL SUMP A FRAME CYLINDER BLOCK JACKET WATER CYLINDER LINER CYLINDER HEAD INTAKE PORTS.

CYLINDER HEADS AND VALVES. 1.DEFINITION  Cylinder head is a casting that covers the top of a cylinder.

Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.

Engine Construction and Principles of Operation

Components of 4-stroke Engine Created by:- Prashanth Nair Sawan Makwana Jigar Chauhan Harshil Gohel Saumil Joshi.

Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.

Internal combustion engine

“DIESEL ENGINE” A SUMMER TRAINING PRESENTATION ON

CYLINDER LINERS LESSON FOUR. 1.LINER DEFINITION A removable component, cylindrical in shape, inserted into the engine block. It can be replaced when worn.

Supreme Power Engine Basics The four cycle engine.

ENGINE DESIGN AND OPERATION. ENGINE CLASSIFICATIONS n VALVE ARRANGEMENT n CAMSHAFT LOCATION n IGNITION TYPE n CYLINDER ARRANGEMENT n NUMBER OF CYLINDERS.

Aaron’s Engine Anatomy

ENGINE PURPOSE Converts chemical energy into mechanical energy to produce power to move the vehicle.

Engine Terminology The 5 Piece Top End Lesson 5 March 2008.

ENTC-370PROF. ALVARADO1 Fluid Mechanics LAB: Actuator Constructions and Component Identification.

Chapter 4 Compression System

Fuel injector The fuel is delivered by the fuel pumps to the fuel injectors or fuel valves. For the fuel to burn completely at the correct time, it must.

LESSON ONE CYLINDERS & CRANKCASE.

UNIT –III(B) POWER PLANTS

CYLINDER LINERS.

LESSON ELEVEN. FUEL OIL SYSTEM 1.FUEL OILS 1.H.F.O.

Objectives Explain the basic function of an internal combustion engine. Describe the five events required for internal combustion engine operation. Describe.

Diesel Engine Components

Automotive Engines Theory and Servicing

Constructional Engine Components

Valve Train Assemblies

STEP ONE: INTAKE Air and fuel enter the small engine through the carburetor. The carburetor to supply a mixture of air and fuel for proper combustion.

Internal Combustion Engines – The Diesel

POWER GENERATION External And Internal Combustion Engines.

Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.

Four Stroke Compression Ignition (CI) Engine

Diesel Engine 4 Stroke Cycle model

Pistons, Rings, and Connecting Rods

Chapter 11 Lesson 3 Engine Top End.

Diesel Engine Components

The four-stroke engine

Cooling System Get the engine up to optimum operating Temperature as quickly as possible and maintains it at that temperature. Controls the heat produced.

Automotive Engines Theory and Servicing

Presentation transcript:

CYLINDER HEADS AND VALVES

1.DEFINITION  Cylinder head is a casting that covers the top of a cylinder.

2. FUNCTION  To close tightly / seal off the top of cylinders.  To form the combustion chamber, together with the piston crown or in some cases with the liner itself.

2. FUNCTION  To close toghtly / seal off the top of cylinders.  To form the combustion chamber, together with the piston crown or in some cases with the liner itself.  To carry the injector and the valves.

3. VALVES All internal combustion engines ( 2 or 4-stroke ) have:  an air starting valve which admits compressed air into the cylinder for starting purposes;  a safety or relief valve is a spring loaded valve set to a safe limit which releases excessive pressure;  an indicator cock which is used as a point of the indicator mechanism attachment.

Spring loaded non-return safety valve

 4-stroke engines have inlet / intake and exhaust valves.

4. STRESSES High pressure and temperature due to combustion.

5. REQUIREMENTS  Strong, sturdy construction / manufacture.  Carefully cooled

6. COOLING Is executed by F.W. circulation, as excessive temperature may give rise to damage by cracking.

7. MATERIAL Cast or forged steel Special cast iron

8. DESIGN It’s not simple. It has valve bores and passages.  RND-M One piece steel block with cooling bores.  B & W ( K-GF Type ) Two parts, outer cover and inner insert. The head is a solid steel plate with radial cooling water bores. The insert contains a bore for the exhaust valve cage and mounting for fuel valves, a safety valve and an indicator valve.  B & W ( K-GF Type ) One piece of forged steel with cooling water drillings.  Sulzer Z 40 The double bottom water cooled cylinder head made of special cast iron. It has two inlet and two exhaust valves as well as a centrally arranged fuel valve.

9. HEAD SECURING By studs made of alloyed steel with close-pitch thread.

9. HEAD SECURING By studs made of alloyed steel with close-pitch thread. The heads are held in place / held against the cylinder liner top collar by studs screwed into the cylinder block / attached to the cylinder frame by studs tightened by hydraulic tools.